4 layers277.2 × 107.5 mm
Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0
4 layers91 × 91 mm
Keymodule revides
Mosselman/PixelPanelKeymodule & pcb design
- Size
- 91 × 91 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 103
- Pads
- 464
- Tracks, vias
- 850, 93
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jan 2026
- Updated
- 2 May 2026
Overview
Keymodule revides is an open-source printed circuit board by Mosselman, from the Mosselman/PixelPanel repository on GitHub, published under the MIT licence. It is a 4-layer board of 91 × 91 mm with 123 parts on 103 nets, routed with 850 tracks and 93 vias.
It is built around the RP2040, SN74LV1T34DBV and W25Q128JVSIQ, with the AMS1117-3.3, WS2812B and ABM8-272-T3 among its other parts. Its parts include 25 diodes, 25 inductors, 12 capacitors, 4 resistors and 4 ICs. It belongs with the RP2040 boards of this library.
Main components
6
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdParts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | D | Diode_SMD:D_0603_1608Metric | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +9 |
| 25 | WS2812B | 1_Custom_library:Sk6812 mini-E Upsidedown | L1, L2, L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L20, L21, L22, L23 +9 |
| 25 | ~ | 1_Custom_library:Kailh low profile Choc switch V1 | M_SW1, M_SW2, M_SW10, M_SW11, M_SW12, M_SW13, M_SW14, M_SW15, M_SW16, M_SW17, M_SW18, M_SW19, M_SW20, M_SW21, M_SW22, M_SW23 +9 |
| 7 | 100nf | Capacitor_SMD:C_0402_1005Metric | C4, C4, C4, C5, C8, C10, C15 |
| 4 | Conn_01x01 | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Horizontal | 5V, 5V, GND, GND |
| 3 | TestPoint_Pad_D2.0mm | TestPoint:TestPoint_Pad_D2.0mm | 3.3V, 5V, GND |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R4 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | NO, R5 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3, J6 |
| 1 | 10K DNF | Resistor_SMD:R_0402_1005Metric | NO |
| 1 | 1uf | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | ABM8-272-T3 | Oscillator:Oscillator_SMD_SiT_PQFN-4Pin_2.0x1.6mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BOOT | TestPoint:TestPoint_Pad_D2.0mm | BOOT |
| 1 | RESET | TestPoint:TestPoint_Pad_D2.0mm | RUN |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SW_PUSH_6mm | Button_Switch_THT:SW_PUSH_6mm | RESET |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U4 |
The 111 most common of 123 parts.
Questions
How big is the Keymodule revides PCB?
It measures 91 × 91 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Keymodule revides use?
123 parts, built around the RP2040, SN74LV1T34DBV, W25Q128JVSIQ and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keymodule revides KiCad files?
From the Mosselman/PixelPanel repository on GitHub, at the commit this page was made from: the board is Keymodule/Pcb/Keymodule revides.kicad_pcb and its schematic Interface module/Pcb/Interface module/Interface module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keymodule revides design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers43.4 × 53 mm
Dactyl rp2040-right
ThomasBoom89/dactyl-pcb
A custom pcb for the dactyl split keyboard.
40 partsEUPL-1.2 - 2 layers38.1 × 133.4 mm
PCBProject
vinnesttree/TixClock
The Tix Clock was originally sold in 2006 by ThinkGeek. Unfortunately, these are no longer sold. This project hopes to try to recreate this iconic clock in a miniature format.
85 partsMIT - 6 layers40 × 40 mm
Integrated FOC Stepper Driver
chpaxson/Echo-Telepresence
UC Berkeley ME 135/235 Spring 2025 Term Project
77 parts2 - 2 layers91.5 × 71.5 mm
Neurodots
ki-manufaktur/neurodots
This project is inspired by the 3D printed 4x4 Colour Dot Puzzle by Sebastian Coddington and featured in Hackaday: Color Dot Puzzle Will Wrinkle Your Brain.
74 parts2 - 4 layers76.3 × 99.3 mm
- 4 layers39.7 × 56.8 mm
- 4 layers74.1 × 130 mm
