Skip to the content
4 layers83.1 × 31.9 mmWeighingScalePCB, the printed circuit board in 3D

Coffee Weighing Scale using HX711

Size
83.1 × 31.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
41
Nets
55
Pads
144
Tracks, vias
82, 1
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Sep 2025
Updated
5 Oct 2025

Overview

WeighingScalePCB is an open-source printed circuit board by meepdong, from the meepdong/Weighing-Scale-Coaster repository on GitHub. It is a 4-layer board of 83.1 × 31.9 mm with 41 parts on 55 nets, routed with 82 tracks and 1 via.

It is built around the TTP223-BA6, HX711 and RT9193-33GB, with the BSS138 and MMBT2222A among its other parts. Its parts include 16 capacitors, 12 resistors, 6 ICs, 3 transistors and 1 connector. It belongs with the ESP32 and RP2040 boards of this library.

Main components

5

README

README.md

Weighing Scale Coaster

A precision coffee scale built around the HX711 load cell amplifier, optimized for responsiveness and stability. Designed for baristas, tinkerers, and embedded engineers who care about both performance and personality.

Weighing Scale Coaster

Features

• HX711-based load cell interface with high-resolution weight readings

• Reference-inspired filtering pipeline adapted from Analog Devices' weigh scale design

• OLED display with expressive dome-shaped eyes and smile animation

• Timer with short press toggle and long press reset

• Flicker-free weight display using hysteresis and trimmed averaging

• Designed for both Raspberry Pi Pico W and Seeed Studio XIAO ESP32-C6

Hardware Overview

Components

• HX711 Load Cell Amplifier

• 5 kg Load Cell

• SSD1306 OLED Display (128×32)

• Two momentary push buttons (Tare + Timer) . To be replaced with capacitive touch

• Microcontroller: Raspberry Pi Pico W or Seeed Studio XIAO ESP32-C6

Wiring Table

Pin on OLEDPin on HX711Pin on Pico WPin on XIAO ESP32-C6
VCCVCC3.3V3.3V
GNDGNDGNDGND
Data (DT)DTGPIO 16GPIO 10
Clock (SCK)SCKGPIO 17GPIO 11
OLED SDASDAGPIO 4GPIO 4
OLED SCLSCLGPIO 5GPIO 5
Tare Button-GPIO 18GPIO 6
Timer Button-GPIO 19GPIO 7

Load Cell Algorithm

This project adapts the signal processing architecture from Analog Devices' weigh scale reference design to the HX711. Filtering Pipeline

• Trimmed Moving Average: Removes min/max outliers from a rolling window to suppress noise while preserving step response.

• Step Detection: Detects real weight changes using dual-threshold logic and pre-fills the filter buffer to skip lag.

• Display Hysteresis: Prevents flicker by suppressing small changes below a threshold.

Why It Works

• HX711 is a 24-bit sigma-delta ADC with built-in gain and ratiometric measurement.

• Filtering compensates for its limited noise-free resolution and slow sample rate.

• The result: smooth, stable, and responsive weight readings even with low-cost hardware.

User Interaction

OLED shows timer and weight. Startup animation includes blinking eyes and a smile. A Hall effect sensor to be integrated for a lid-activated deep sleep and wake mode.

Future Improvements • Calibration helper script for computing

• BLE or Wi-Fi integration for remote brew tracking

• Capacitive touch buttons

Credits Built by Maurice D'Moss, mechanical product design engineer with a passion for coffee and embedded systems. Filtering architecture inspired by Analog Devices' weigh scale reference design.

License

This project is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License.

You are free to use, modify, and share this project for personal and educational purposes.
Commercial use is not permitted without explicit permission from the author.

Parts

41
QtyValueFootprintReferences
50.1uFCapacitor_SMD:C_0402_1005MetricC1, C2, C4, C6, C7
5100Resistor_SMD:R_0402_1005MetricR1, R2, R4, R5, R6
510KResistor_SMD:R_0402_1005MetricR3, R7, R8, R9, R10
510uFCapacitor_SMD:C_0402_1005MetricC3, C5, C11, C12, C14
41uFCapacitor_SMD:C_0402_1005MetricC8, C9, C10, C13
21KResistor_SMD:R_0402_1005MetricR11, R12
222pFCapacitor_SMD:C_0402_1005MetricC15, C16
2BSS138Package_TO_SOT_SMD:SOT-23Q2, Q3
2TTP223-BA6TTP223-BA6:SOT23-6U5, U6
2TouchPad0my_project:Touch-Pad_10mmT1, T2
13.3uHInductor_SMD:L_Coilcraft_XxL4040L1
1Conn_01x04_PinConnector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_VerticalJ1
1HX711Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU2
1MMBT2222APackage_TO_SOT_SMD:SOT-23Q1
1RT9193-33GBRT9193-33GB:SOT94P279X129-5NU4
1SSD1306KiCad-SSD1306_OLED-0.91-128x32-master:SSD1306_OLED-0.91-128x32U3
1XIAO-ESP32-S3-SMDSeeed Studio XIAO Series Library:XIAO-ESP32C6-SMDU1

Similar boards

  • 4 layers52 × 73 mmConference Badge, the printed circuit board in 3D

    Conference Badge

    Dheemanth0207/Electronic-Conference-Badge

    This project investigates the design and development of a smart, energy-efficient electronic conference badge intended to replace traditional printed name tags used at events and meetings.

    51 parts
  • 2 layers149.5 × 45 mmRadioduino, the printed circuit board in 3D

    Radioduino

    YO3DBZ/Radioduino

    some ardruino code for a reciver based on the SI5351

    58 parts
  • 4 layers81.2 × 81.2 mmView base, the printed circuit board in 3D

    View base

    SeedLabs-it/smartknob-hardware

    PCB and CAD files for smartknob devkit

    259 parts47
  • 2 layers60 × 40 mmForcegauge, the printed circuit board in 3D

    Forcegauge

    szbeni/forcegauge

    Traning for climbing. Load cell with HX711 and real time plotting,

    77 parts18GPL-3.0
  • 4 layers90.6 × 58.1 mmEcoApi pcb, the printed circuit board in 3D

    EcoApi pcb

    EcoApi/EcoApi_BeeHiveMonitoring

    describ options with 0R resistors. etc ...

    179 parts4GPL-3.0
  • 2 layers100 × 100 mmSenior Design, the printed circuit board in 3D

    Senior Design

    bin2ai/Senior_Design

    KiCad project files for my UCF CECS senior design project

    165 parts
  • 2 layers71.5 × 43.3 mmCoffee scale, the printed circuit board in 3D

    Coffee scale

    BTrujillo816/coffee-scale

    Coffee scale project for ECET 430

    56 partsCC-BY-SA-4.0
  • 2 layersAmulet, the printed circuit board in 3D

    Amulet

    mitxela/amulet

    Source code and KiCad design files for the UV Protection Amulet.

    31 parts42

Questions

How big is the WeighingScalePCB PCB?

It measures 83.1 × 31.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the WeighingScalePCB use?

41 parts, built around the TTP223-BA6, HX711, RT9193-33GB and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the WeighingScalePCB KiCad files?

From the meepdong/Weighing-Scale-Coaster repository on GitHub, at the commit this page was made from: the board is KiCAD/WeighingScalePCB/WeighingScalePCB.kicad_pcb and its schematic KiCAD/WeighingScalePCB/WeighingScalePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the WeighingScalePCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask meepdong before reusing the design.