4 layers125.7 × 76.5 mm
UGC Main R4K
HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
168 parts62
2 layers26 × 21 mm
ZigbeeBuzzer
medo64/ZigbeeBuzzerDiode is needed only if inductive diode is used (e.g. vibration motor). This is used for testing purposes only at this time.
- Size
- 26 × 21 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 15
- Nets
- 11
- Pads
- 45
- Tracks, vias
- 91, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Sep 2026
- Updated
- 3 Nov 2026
Overview
ZigbeeBuzzer is an open-source printed circuit board by medo64, from the medo64/ZigbeeBuzzer repository on GitHub, published under the MIT licence. It is a 2-layer board of 26 × 21 mm with 15 parts on 11 nets, routed with 91 tracks and 10 vias.
It is built around the CUS08F30. Its parts include 7 resistors, 2 capacitors, 1 IC, 1 diode and 1 transistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
hardware/README.mdZigbee Buzzer Hardware
Parts
| # | Part | RefDes |
|---|---|---|
| 1 | C 10nF X7R 16V (0805) | C1 |
| 1 | C 10uF X5R 16V (0805) | C2 |
| 1 | D Schottky [CUS08F30,H3F] (SOD323) | D1 |
| 1 | DS LED (0805) | DS1 |
| 1 | LS Passive Buzzer | LS1 |
| 1 | Q NPN 100mA 20V [BC846B,235] (SOT23-3) | Q1 |
| 1 | R 470 0.125W (0805) | R1 |
| 3 | R 1K 0.125W (0805) | R2-R4 |
| 1 | R 2.2K 0.125W (0805) | R5 |
| 2 | R 100K 0.125W (0805) | R6-R7 |
| 1 | S Tactile 4.0x4.0x1.5mm | S1 |
| 1 | U Wireless [Xiao ESP32-C6] | U1 |
Board Size
| Dimensions | Area | Thickness | |
|---|---|---|---|
| PCB | 26.0 x 21.0 mm | 0.9 in² | 0.8 mm |
Flyback diode
Diode is needed only if inductive diode is used (e.g. vibration motor). This is used for testing purposes only at this time.
Battery
Battery can be optionally attached. This is currently used only for testing.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Medo64:R (0805) | R7, R8 |
| 2 | 1K | Medo64:R (0805) | R2, R3 |
| 1 | Medo64:LS Buzzer (D9.5-H5.5) | LS1 | |
| 1 | 10K | Medo64:R (0805) | R4 |
| 1 | 10n | Medo64:C (0805) | C1 |
| 1 | 10u | Medo64:C (0805) | C2 |
| 1 | 330 | Medo64:R (0805) | R1 |
| 1 | 33K | Medo64:R (0805) | R5 |
| 1 | ACT | Medo64:DS (0805) | DS1 |
| 1 | CUS08F30 | Medo64:D Schottky (SOD323) | D1 |
| 1 | NPN | Medo64:Q Transistor NPN (SOT23-3) | Q1 |
| 1 | SPST | Medo64:S Tactile SPST-NO 12V 50mA 4.0x4.0x1.5mm (SMD-4) | S1 |
| 1 | Xiao-ESP32-C6 | Medo64:U Wireless [Xiao ESP32C6] (SMD-14) | U1 |
Questions
How big is the ZigbeeBuzzer PCB?
It measures 26 × 21 mm and has 2 copper layers, 0.8 mm thick.
What parts does the ZigbeeBuzzer use?
15 parts, built around the CUS08F30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ZigbeeBuzzer KiCad files?
From the medo64/ZigbeeBuzzer repository on GitHub, at the commit this page was made from: the board is hardware/ZigbeeBuzzer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ZigbeeBuzzer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers45.3 × 26 mm
GCP-2
HandHeldLegend/GC-Adapter-RP2040
The 3D shell and buttons are licensed under a Creative Commons Attribution 4.0 International License .
47 parts24 - 4 layers161 × 100 mm
- 2 layers26.5 × 17 mm
- 4 layers110.9 × 59.7 mm
- 4 layers110.9 × 59.7 mm
- 4 layers125.7 × 65.9 mm
UGC OpenMain
HandHeldLegend/Open-GC-Ultimate
Fully open, bare-bones GC Ultimate PCB made for makers and indies.
117 parts3AGPL-3.0 - 4 layers125.5 × 47.1 mm
