4 layers125.7 × 76.5 mm
UGC Main
HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
128 parts62
4 layers125.5 × 47.1 mm
Sgpp main pcb
HandHeldLegend/SuperGamepadPlus3- Size
- 125.5 × 47.1 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 105
- Nets
- 133
- Pads
- 534
- Tracks, vias
- 1,515, 252
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Sep 2023
- Updated
- 5 Feb 2025
Overview
Sgpp main pcb is an open-source printed circuit board by HandHeldLegend, from the HandHeldLegend/SuperGamepadPlus repository on GitHub. It is a 4-layer board of 125.5 × 47.1 mm with 105 parts on 133 nets, routed with 1,515 tracks and 252 vias.
It is built around the RP2040, CH340K and GD25Q80EEIGR, with the PI3USB4000AZUAEX, BAS16VY,115-JSM and CUS08F30 among its other parts. Its parts include 27 resistors, 20 capacitors, 11 inductors, 8 diodes and 7 ICs. It belongs with the ESP32, RP2040 and RISC-V boards of this library.
Main components
11
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
CH340K
ESSOP-10-150mil-1mm-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial ESSOP-10-150mil-1mm USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
GD25Q80EEIGR
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 11uA 133MHz 2.7V~3.6V 20 Years 400us 8Mbit SPI USON-8-EP(2x3) NOR FLASH ROHSGigaDevice Semicon BeijingNOR FLASH
PI3USB4000AZUAEX
UQFN-10(1.5x2)-40℃~+85℃ 100us 1GHz 2.7V~5.5V 250ps 2:1 50ns 5Ω 7pF UQFN-10(1.5x2) Analog Switches, Multiplexers ROHSDiodes IncorporatedAnalog Switches, Multiplexers
BAS16VY,115-JSM
SOT-363-55℃~+150℃ 1 Independent 1.25V@150mA 150mA 1uA@75V 200mW 4ns 75V SOT-363 Switching Diodes ROHSJSMSEMISwitching Diodes
CUS08F30
SOD-323Schottky DiodesDOWO
1TS026A-1000-0550-CT
SMD-4P,2.6x1.6mm-40℃~+90℃ 0.55mm 1.6mm 12V 1N 2.6mm 200,000 Cycles 50mA Black IP68 No Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD-4P,2.6x1.6mm Tactile Switches ROHSHYPTactile SwitchesBSS138DW-7-F-ES
SOT-363-55℃~+150℃ 1.5Ω@10V、1.6Ω@4.5V 1V 2 N-Channel 2.2pF 25pF 410mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-363 MOSFETs ROHSElecSuperMOSFETs
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
MIP25202R2MBE
10081.3A 2.2uH 80mΩ ±20% 1008 Inductors (SMD) ROHSINPAQInductors (SMD)
CSTNE12M0GH5L000R0
SMD3213-3P-40℃~+85℃ 12MHz 30Ω 33pF SMD3213-3P Ceramic Resonators ROHSMurataCeramic Resonators
README
README.mdSuper Gamepad+
This is the official Github page for the Super Gamepad+ from Retro Playground. Retro Playground is a collaborative effort between Hand Held Legend and RetroSix.
Software and PCB License
This firmware and PCB model are licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0201_0603Metric | C2, C5, C6, C8, C10, C11, C12, C13, C14, C16, C17 |
| 10 | 1k | Resistor_SMD:R_0201_0603Metric | R1, R2, R3, R4, R5, R6, R18, R19, R20, R24 |
| 10 | SK6805-EC-15 | hhl:SK6805-EC-15 | L1, L2, L3, L4, L5, L6, L7, L8, L9, L10 |
| 7 | 10k | Resistor_SMD:R_0201_0603Metric | R9, R10, R11, R12, R13, R16, R21 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP9 |
| 4 | 1u | Capacitor_SMD:C_0201_0603Metric | C1, C3, C15, C18 |
| 4 | BAS16VY,115 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D5, D6, D7, D8 |
| 4 | BPAD | hhl:progcc_bpad | BPA1, BPB1, BPX1, BPY1 |
| 4 | CUS08F30 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D4, D9 |
| 4 | DPAD | hhl:progcc_dpad | DPD1, DPL1, DPR1, DPU1 |
| 3 | 78171-0002 | hhl:78171-0002 | TRL1, TRR1, U1 |
| 2 | 0 | Resistor_SMD:R_0201_0603Metric | R14, R15 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C21, C22 |
| 2 | 1TS026A-1000-0550 | hhl:1TS026A-1000-0550 | SW1, SW2 |
| 2 | 27 | Resistor_SMD:R_0201_0603Metric | R22, R23 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric | R7, R8 |
| 2 | 75k | Resistor_SMD:R_0603_1608Metric | R25, R26 |
| 2 | BSS138DW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1, Q2 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | SPAD | hhl:snes_pad | SPSEL1, SPST1 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 1.3A 2.2uH ±20% 80mΩ | Inductor_SMD:L_1008_2520Metric | L11 |
| 1 | 100 | Resistor_SMD:R_0201_0603Metric | R27 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10uF/10V (20%) | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 330 | Resistor_SMD:R_0201_0603Metric | R17 |
| 1 | 47uF 6.3v | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C20 |
| 1 | BQ25180 | hhl:DSBGA | U2 |
| 1 | CH340K | hhl:ESSOP-10 | U5 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | Crystal_GND3 | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | ESP32-PICO-MINI-02 | hhl:MODULE_ESP32-PICO-MINI-02 | U6 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | GD25Q80EEIGR | hhl:USON-8-EP(2x3) | U7 |
| 1 | PI3USB4000A | Package_DFN_QFN:Texas_UQFN-10_1.5x2mm_P0.5mm | U3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U8 |
| 1 | TPS630001RCR | hhl:VREG_V62_16624-01YE | U9 |
| 1 | USB_C_Receptacle | hhl:U06-CF2A5R-037 | J1 |
| 1 | Val** | hhl:FP_RPLAYGROUND_LOGO | Ref** |
Questions
How big is the Sgpp main pcb PCB?
It measures 125.5 × 47.1 mm and has 4 copper layers, 1 mm thick.
What parts does the Sgpp main pcb use?
105 parts, built around the RP2040, CH340K, GD25Q80EEIGR and PI3USB4000AZUAEX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sgpp main pcb KiCad files?
From the HandHeldLegend/SuperGamepadPlus repository on GitHub, at the commit this page was made from: the board is PCB/legacy_main_pcb/sgpp_main_pcb.kicad_pcb and its schematic PCB/legacy_main_pcb/sgpp_main_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sgpp main pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask HandHeldLegend before reusing the design.
Similar boards
- 4 layers110.9 × 59.7 mm
- 4 layers125.7 × 65.9 mm
UGC OpenMain
HandHeldLegend/Open-GC-Ultimate
Fully open, bare-bones GC Ultimate PCB made for makers and indies.
117 parts3AGPL-3.0 - 2 layers25.9 × 70.1 mm
- 4 layers125.5 × 45.6 mm
- 4 layers45.3 × 26 mm
GCP-2
HandHeldLegend/GC-Adapter-RP2040
The 3D shell and buttons are licensed under a Creative Commons Attribution 4.0 International License .
47 parts24 - 4 layers140 × 51.5 mm
LatteJr Main Board
HandHeldLegend/Latte-Jr-HW
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
129 parts - 4 layers110.9 × 59.7 mm
