4 layers195 × 45 mm
2 layers36 × 48 mm
TapiTap
medo64/TapiTapGame of reflexes
- Size
- 36 × 48 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 17
- Nets
- 19
- Pads
- 65
- Tracks, vias
- 177, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 May 2024
- Updated
- 14 May 2024
Overview
TapiTap is an open-source printed circuit board by medo64, from the medo64/TapiTap repository on GitHub, published under the MIT licence. It is a 2-layer board of 36 × 48 mm with 17 parts on 19 nets, routed with 177 tracks and 16 vias.
It is built around the PIC16F15244-E/P and S4B-XH-A. Its parts include 6 connectors, 5 capacitors, 2 resistors, 1 IC and 1 crystal. It belongs with the PIC boards of this library.
Main components
2
PIC16F15244-E/P
PDIP-20-40℃~+125℃ 1.8V~5.5V 10bit 17 32MHz 512Byte 7KB 8 Bit Built-in FLASH PIC PDIP-20 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
S4B-XH-A
弯插,P=2.5mm-、- 1x4P、1x2P 1、1 2.5mm、3.96mm 250V、250V 2、4 4P、2P 6.1mm、9.4mm 7.86mm、12.4mm 8.5mm、11.5mm Brass、Brass K Pin PA66、PA66 Right Angle、Through Hole Tin、Tin UL94V-0、UL94V-0 White、White XH、VH Push-Pull,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdTapiTap
Game of reflexes.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | S4B-XH-A | Medo64:J JST XH S (4w) | J2, J3, J4, J5, J6 |
| 2 | 10u | Medo64:C (0805) | C4, C5 |
| 2 | 18p | Medo64:C (0805) | C1, C2 |
| 1 | 100n | Medo64:C (0805) | C3 |
| 1 | 12 MHz | Medo64:Y Crystal (HC49U) | Y1 |
| 1 | 1K | Medo64:R (0805) | R1 |
| 1 | 5K1 | Medo64:R (0805) | R2 |
| 1 | Medo64 | Medo64:ICON Medo64 | ICON |
| 1 | Microchip PIC | Medo64:ICSP PIC Pogo (6w) | ICSP |
| 1 | PIC16F15244 | Medo64:U Micro [PIC16F15244] (SOIC-20) | U1 |
| 1 | S4B-XH-A | Medo64:J JST XH B (3w) | J1 |
Questions
How big is the TapiTap PCB?
It measures 36 × 48 mm and has 2 copper layers, 0.8 mm thick.
What parts does the TapiTap use?
17 parts, built around the PIC16F15244-E/P and S4B-XH-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TapiTap KiCad files?
From the medo64/TapiTap repository on GitHub, at the commit this page was made from: the board is hardware/src/TapiTap.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TapiTap design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers100 × 100 mm
- 2 layers
- 2 layers100 × 100 mm
LEOS flight computer
VIP-LES/flight-computer-pcb
The flight computer PCB stack design. Started Fall '25
38 parts - 2 layers100 × 100 mm
- 2 layers109.9 × 62 mm
- 2 layers195 × 70 mm
- 2 layers50 × 35 mm
