2 layers

Jukebox

Minecraft Jukebox Replica using RFID and ESP32

Copper layers: 2
Thickness: 1.6 mm
Parts: 52
Nets: 82
Pads: 257
Tracks, vias: 0, 0
Routed: Not yet
KiCad: KiCad 9.0 (file 20241229)
Created: 16 Jul 2025
Updated: 25 Aug 2025

Overview

Jukebox is an open-source printed circuit board by boernerc20, from the boernerc20/jukebox repository on GitHub. It is a 2-layer board with 52 parts on 82 nets.

It is built around the ESP32-WROOM-32, AMS1117-3.3 and SS8050, with the B3B-XH-A and S4B-XH-A among its other parts. Its parts include 16 resistors, 15 capacitors, 6 diodes, 4 connectors and 3 ICs. It belongs with the ESP32 boards of this library.

Main components

README

README.md

UNDER CONSTRUCTION

Electronics are finished and ready for jukebox enclosure:

Routing on back of perf-board:

Parts

Qty	Value	Footprint	References
8	10k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R2, R3, R4, R5, R11, R21, R22, R23
5	0.1 uF/50V	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C9, C14, C15, C19, C22
3	22 uF/10V	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C10, C11, C21
3	D	Diode_SMD:D_SOD-523	D4, D5, D6
2	0R	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R17, R18
2	10u	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C3, C5
2	220p	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C7, C8
2	2k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R7, R24
2	5.1k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R8, R12
2	SS8050	Package_TO_SOT_SMD:SOT-23	Q1, Q2
2	SW_Push	Button_Switch_SMD:SW_SPST_B3U-1100P	SW1, SW2
1	0.1u	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C6
1	100n	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C1
1	10k	3306K:TRIM_3306K-1-202	RV2
1	22.1k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R25
1	4.7 uF/6.3V	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C20
1	47.5k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R26
1	8Ω	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal	LS1
1	AMS1117-3.3	Package_TO_SOT_SMD:SOT-223-3_TabPin2	U4
1	B3B-XH-A	B3B_XH_A:JST_B3B-XH-A	J3
1	CP2102N-Axx-xQFN28	Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm	U1
1	Conn_01x10_Socket	Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical	J5
1	D_Schottky	Diode_SMD:D_SOD-323F	D3
1	ESP32-WROOM-32	RF_Module:ESP32-WROOM-32	D2
1	Ferrite	BLM21:BEADC2012X105N	FB2
1	Ferrite (600ohm @ 100MHz)	BLM21:BEADC2012X105N	FB1
1	LED	LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder	D1
1	MAX98357A	Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm	U2
1	S4B-XH-A	S4B-XH-A:JST_S4B-XH-A	J2
1	USB_C_Receptacle_USB2.0_16P	Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal	J1

Questions

What parts does the Jukebox use?

52 parts, built around the ESP32-WROOM-32, AMS1117-3.3, SS8050 and B3B-XH-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Jukebox KiCad files?

From the boernerc20/jukebox repository on GitHub, at the commit this page was made from: the board is 1.Hardware/jukebox.kicad_pcb and its schematic 1.Hardware/amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Jukebox design in my own project?

Its repository states no licence, so its author keeps all rights: ask boernerc20 before reusing the design.

Category and platform

ESP32

Project files

Show this board on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/boards/boernerc20-jukebox" title="Jukebox in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/boards/boernerc20-jukebox.jpg" alt="Jukebox" width="1200" height="900">

A picture that opens the board, for a README

[![Jukebox](https://pcbkit.io/embed/boards/boernerc20-jukebox.jpg?size=s)](https://pcbkit.io/boards/boernerc20-jukebox)

Source

Repository: boernerc20/jukebox
Board file: 1.Hardware/jukebox.kicad_pcb
Commit: 90c4cb4
Licence: Not stated

Similar boards

4 layers50 × 50 mm
ESP32-Sentinel Kinetic Wireless Dongle
alextrical/ESP32-Sentinel-Kinetic-Wireless-Dongle
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller without a Display
81 parts6CERN-OHL-S-2.0
2 layers52 × 29 mm
Esp32 wroom mudule
moksh-pcb-design/ESP32-WROOM-Development-Board
Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.
26 parts2
2 layers52 × 29 mm
Esp32 wroom
7205jmj/Custom-ESP32-WROOM-32-Development-Board
Most ESP32 development boards available in the market include additional features that may not be required for every project.
26 parts1
2 layers52.1 × 29 mm
ESP32
darshudarshans1122/PCB-Design-Portfolio
PCB design projects created using KiCad
27 parts1
2 layers52 × 30 mm
Esp32wroom32
Harshavar8jdm/esp32-wroom-32-dev-board

26 parts1GPL-3.0
2 layers50 × 35 mm
Esp32 board
Adichidrawar/electronics-assessment-IF
Hardware design solution for the Intelligence Factory Hardware/Mechatronics Engineer take-home assessment. Includes a two-board ESP32-based embedded system with a remote IMU sensor board, complete PCB design in KiCad…
27 parts
2 layers52 × 29 mm
Esp wroom 32
arm-n/ESP-WROOM-32-Development-Board
A hardware prototyping project based on the ESP-WROOM-32 module, designed using KiCad. This repository contains the circuit schematic, PCB layout, Gerber manufacturing files, design screenshots, datasheets and…
26 parts
2 layers68.1 × 39.8 mm
ChiggyRoom wired
Chiggy-Playz/ChiggyRoomAutomation

47 parts