

Solenoid Valve
Solenoid drive circuit using PCIe with unique pin definition
- Size
- 84.3 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 76
- Pads
- 383
- Tracks, vias
- 420, 191
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2019
- Updated
- 2 Jul 2022
Overview
Solenoid Valve is an open-source printed circuit board by mechaken, from the mechaken/SolenoidDriver repository on GitHub, published under the MIT licence. It is a 2-layer board of 84.3 × 50 mm with 60 parts on 76 nets, routed with 420 tracks and 191 vias.
It is built around the ULN2003, AP2210N-3.3TRG1 and NJM7812FA, with the SI8621AB-B-ISR among its other parts. Its parts include 20 connectors, 18 diodes, 11 capacitors, 9 ICs and 1 resistor. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
4ULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor ArraysAP2210N-3.3TRG1
SOT-23-40℃~+125℃@(Tj) 1 13.2V 1uA 250mV@(300mA) 3.3V 300mA 75dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsNJM7812FA
TO-220F-40℃~+150℃@(Tj) 1 1.5A 12V 30V 6mA 71dB@(120Hz) 75uV Fixed Over Current Protection、Over Temperature Protection Positive TO-220F Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNisshinbo Micro Devices Inc.Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSI8621AB-B-ISR
SOIC-8-40℃~+125℃ 1 1 1Mbps 2.5V~5.5V 2.5V~5.5V 2500 35ns 50kV/us Low Level Power-on reset SOIC-8 Digital Isolators ROHSSilicon LabsDigital Isolators
README
README.mdSolenoidDriver
表

裏

概要
独自にピン定義したPCIeを使ったソレノイド駆動回路です。
最大17個のソレノイドを接続と駆動ができます。(17個も駆動させない場合は、A-Cのうち使用する行に接続されているダーリントントランジスタやその他部品のみ実装し、動作させることも可能です。)
作成しているモータードライバ(CAN-H-Bridge_Solo_MD)とほぼ同じ大きさなので、同一のマザーボードの中にモータードライバと本基板を入れることが可能です。
機能
- CAN通信を用いたソレノイドの制御
- DIPスイッチを利用して、同じプログラムで同一CANバスに最大4つ搭載可能
- ディジタルアイソレータを用いた制御-駆動電源の分離
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J2, J3, J4, J6, J7, J8, J11, J12, J13, J14, J15, J16, J17, J18, J19 +1 |
| 17 | D | Diode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D10, D12, D13, D14, D15, D16, D17, D18 +1 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C6, C9 |
| 3 | ULN2003 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U6, U7, U8 |
| 2 | 1.0u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C7 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 2 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8 |
| 2 | AP2210N-3.3TRG1 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U2, U4 |
| 1 | 0.33u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Bus_mechaken_PCIexpress_x16_164_Position | PCIe:BUS_mechaken_PCIexpress_x16 | J20 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J10 |
| 1 | D_Schottky | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D11 |
| 1 | IKD0403101 | Package_DIP:DIP-8_W7.62mm | S1 |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | NJM7812 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | STM32F303K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U3 |
| 1 | Si8621AB-B-ISR | SamacSys_Parts:SOIC127P600X175-8N | IC1 |
Similar boards
- 2 layers57 × 99 mm

- 2 layers74 × 38 mm

- 2 layers177 × 114 mm

- 2 layers22 × 44.8 mm

- 2 layers100 × 77 mm

- 2 layers80 × 60 mm

- 2 layers40.2 × 19.6 mm

Compact
jgillick/ThunderPack
A self-contained microcontroller, battery, and power management system that fits in your pocket.
59 parts44MIT - 4 layers97 × 87 mm

Questions
How big is the Solenoid Valve PCB?
It measures 84.3 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solenoid Valve use?
60 parts, built around the ULN2003, AP2210N-3.3TRG1, NJM7812FA and SI8621AB-B-ISR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solenoid Valve KiCad files?
From the mechaken/SolenoidDriver repository on GitHub, at the commit this page was made from: the board is Solenoid_Valve.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solenoid Valve design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).