
Display matrix
meadiode/EMES
Epic Minimalist Entertainment System - DIY handheld handheld game console

Epic Minimalist Entertainment System - DIY handheld handheld game console
Matrix driver standalone is an open-source printed circuit board by meadiode, from the meadiode/EMES repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 20 × 22 mm with 17 parts on 39 nets, routed with 448 tracks and 75 vias.
Its parts include 6 resistors, 5 capacitors, 2 ICs and 2 connectors. It belongs with the retro computing and games and lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
EMES - is a very minimalistic DIY handheld game console.
Work in progress.
EMES has the following specifications:

The console doesn't have an onboard CPU/MCU, instead an MCU is placed on every removable cartridge.

Each cartridge features an ATTiny10 MCU with the following specs:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R6 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 2K2 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | IS31FL3743A | components:UQFN-40 | U1 |
| 1 | ~ | components:led_matrix_pcb_pads | U2 |

meadiode/EMES
Epic Minimalist Entertainment System - DIY handheld handheld game console

meadiode/EMES
Epic Minimalist Entertainment System - DIY handheld handheld game console

meadiode/EMES
Epic Minimalist Entertainment System - DIY handheld handheld game console

meadiode/EMES
Epic Minimalist Entertainment System - DIY handheld handheld game console

meadiode/EMES
Epic Minimalist Entertainment System - DIY handheld handheld game console

meadiode/EMES
Epic Minimalist Entertainment System - DIY handheld handheld game console

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!





brown-studios/minuet
Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.

It measures 20 × 22 mm and has 4 copper layers, 1.6 mm thick.
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the meadiode/EMES repository on GitHub, at the commit this page was made from: the board is kicad/matrix_driver_standalone/matrix_driver_standalone.kicad_pcb and its schematic kicad/base_board/base_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).