

MySXActuator
- Size
- 27.7 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 35
- Pads
- 155
- Tracks, vias
- 356, 63
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Mar 2019
- Updated
- 14 Jun 2026
Overview
MySXActuator is an open-source printed circuit board by mczerski, from the mczerski/MySXActuator repository on GitHub. It is a 2-layer board of 27.7 × 44 mm with 42 parts on 35 nets, routed with 356 tracks and 63 vias.
It is built around the AP63205WU, BAT54S and IRFR7546PBF, with the BSS84A, PTS120660V010 and SMAJ26CA among its other parts. Its parts include 16 resistors, 7 capacitors, 6 diodes, 5 transistors and 2 crystals.
Main components
6AP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesIRFR7546PBF
TO-252-2(DPAK)1 N-channel 180pF 280pF 3.02nF 3.7V 60V 7.9mΩ@10V 71A 87nC@10V 99W N-Channel TO-252-2(DPAK) MOSFETs ROHSInfineon TechnologiesMOSFETsBSS84A
SOT-23MOSFETsHUASHUOPTS120660V010
1206-40℃~+85℃ 1.6Ω 100A 100mA 15Ω 1s 250mA 400mW 60V 1206 Resettable Fuses ROHSEatonResettable FusesSMAJ26CA
DO-214AC(SMA)-55℃~+150℃ 26V 28.9V 400W 42.1V 5uA 9.5A Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3, R5, R6, R8, R9 |
| 4 | 10n/50V | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7 |
| 4 | 27 | Resistor_SMD:R_0603_1608Metric | R2, R4, R7, R10 |
| 4 | 2k | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14 |
| 4 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3, D4 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric | R15, R16 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q4 |
| 2 | IRFR7546PbF | Package_TO_SOT_SMD:TO-252-2 | Q2, Q3 |
| 2 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 100n/50V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 10u/50V | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 3.6V | Diode_SMD:D_MiniMELF | D5 |
| 1 | 4.7u | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 8P8C | MySXActuator:AMPHENOL_54601-908WPLF | J1 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | BSS84A | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | PTS120660V010 | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | SMAJ26CA | Diode_SMD:D_SMA | D6 |
| 1 | ~ | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_Horizontal | X2 |
| 1 | ~ | MySXActuator:FE10-2 | X1 |
Similar boards
- 4 layers34.5 × 34.5 mm

- 4 layers98 × 100 mm

Esp32s3-can sd logger
MrBlahhhh/esp32-shield-can1-can2-kdcan-analogin-sdcard
A carrier board an ESP32-S3-DevKitC-1 plugs into, turning it into a vehicle data logger. The dev board brings the MCU and its power; this board brings everything that has to touch a car.
164 parts1 - 4 layers84 × 100 mm

Esp32s3-can sd logger
MrBlahhhh/esp32-autosport
A data logger you wire straight into a race car: 12 V and CAN come in on one 4-pin plug, sensor readings and CAN traffic get written to a microSD card.
206 parts - 2 layers102.4 × 83.1 mm

RoomLink
Escondol/Electiva-Meca
Este repositorio es para colocar tareas asignadas por el profesor Carlos Pichardos.
85 parts - 4 layers102.4 × 83.1 mm

Proyecto de cuatrinestre
Juliodelarosap/Electiva_c2-2023
¡Bienvenidos a la emocionante electiva de Diseño Mecatrónico! En este curso, exploraremos el fascinante mundo de la mecatrónica, una disciplina interdisciplinaria que combina elementos de la ingeniería mecánica…
98 parts - 4 layers

- 4 layers102.4 × 83.1 mm

RoomLink
RobertoAngelLora/Dise-o-Mecatronico
Materia Electiva de Mecatrónica - Diseño Mecatrónico
105 parts - 4 layers80 × 75 mm

Questions
How big is the MySXActuator PCB?
It measures 27.7 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MySXActuator use?
42 parts, built around the AP63205WU, BAT54S, IRFR7546PBF and BSS84A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MySXActuator KiCad files?
From the mczerski/MySXActuator repository on GitHub, at the commit this page was made from: the board is MySXActuator.kicad_pcb and its schematic MySXActuator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MySXActuator design in my own project?
Its repository states no licence, so its author keeps all rights: ask mczerski before reusing the design.