
Microbit LED Driver
mcqn/bike-head
Making your bike more fun (if that's possible) by giving it a head

Making your bike more fun (if that's possible) by giving it a head
NoodleDriver is an open-source printed circuit board by mcqn, from the mcqn/bike-head repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 36 × 70 mm with 46 parts on 74 nets, routed with 386 tracks and 62 vias.
It is built around the CH32V203F8U6, WS2811 and 74HC04D, with the DS8242-33S3, TP4057 and ULN2001 among its other parts. Its parts include 17 resistors, 8 capacitors, 8 connectors, 7 ICs and 2 diodes. It belongs with the RISC-V boards of this library.
Making your bike more fun (if that's possible) by giving it a head.
A laser-cut template to make a cardboard head to mount on the handlebars of your bike. Then customize it with craft supplies or LEDs and a Microbit.
In FreeCAD...
x and y coordinates.y (in this instance) - theta, with tan^-1(x_diff/y_diff)x_offset being 3 * sin(90-theta) and y_offset being 3* cos(90-theta)Start up and loop until someone is chosen or a timeout happens:
it?If it was a timeout, assume someone else is it and proceed
To begin with, use a button press to select someone as it
Loop:
it:
it is received, send a confirmation of passing onit:
itit, you're it, count down from 5 before looping round| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 33R | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C7, C8 |
| 3 | Conn_01x04 | MagneticPogoPinConnector:MagneticPogoPinConnector_1x04_P2.54mm_Horizontal | J1, J2, J6 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 150R | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 2 | WS2811 | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U1, U2 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 560R | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 74HC04 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | CH32V203F8U6 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm | U6 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J8 |
| 1 | DS8242-33S3 | Package_TO_SOT_SMD:SOT-23-3 | U7 |
| 1 | JSM2302 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | On/Off | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | TP4057 | Package_TO_SOT_SMD:TSOT-23-6 | U5 |
| 1 | ULN2001 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB-C-Paddle:USB_C_PADDLE | J5 |
The 44 most common of 46 parts.

mcqn/bike-head
Making your bike more fun (if that's possible) by giving it a head




cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!


dmcke5/XWii-Controller
The Wii U gamepad layout is a fan-favourite for many gamers yet it is rarely used in the current generation of controllers.

It measures 36 × 70 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the CH32V203F8U6, WS2811, 74HC04D and DS8242-33S3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mcqn/bike-head repository on GitHub, at the commit this page was made from: the board is NoodleDriver/NoodleDriver.kicad_pcb and its schematic Microbit-LED-Driver/Microbit-LED-Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).