Skip to the content
2 layers25 × 13 mmTx04 s, the printed circuit board in 3D
Size
25 × 13 mm
Copper layers
2
Thickness
1 mm
Parts
14
Nets
20
Pads
73
Tracks, vias
148, 15
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Jul 2023
Updated
27 Oct 2026

Overview

Tx04 s is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 25 × 13 mm with 14 parts on 20 nets, routed with 148 tracks and 15 vias.

It is built around the ATTINY1604-SSF and WS2812B-2020. Its parts include 5 resistors, 2 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

14
QtyValueFootprintReferences
21kResistor_SMD:R_0603_1608MetricR3, R4
24k7Resistor_SMD:R_0603_1608MetricR1, R2
110kResistor_SMD:R_0603_1608MetricR5
14u7Capacitor_SMD:C_0603_1608MetricC1
1ATtiny1604-SSPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
1BZB784-CxxPackage_TO_SOT_SMD:SOT-323_SC-70D1
1Conn_02x07_Counter_ClockwisePackage_DIP:DIP-14_W10.16mmJ2
1SW_PushLibrary:alps-skrpSW1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1WS2812B-2020LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD2
1mcbeeringi_iconLibrary:mcbeeringi_icon_5mm
1pcb.6ca.meLibrary:pcb.6ca.me_5mm

More from McbeEringi/pcb-stuff

12

Similar boards

  • 2 layers58 × 58 mmMiniwall1b6x6, the printed circuit board in 3D

    Miniwall1b6x6

    bitluni/magnetMatrix6x6

    83 parts306
  • 2 layers60 × 100 mmHpboard, the printed circuit board in 3D

    Hpboard

    c0pperdragon/HotPlate

    Cheap DIY solution to make a heater for hot-plate soldering.

    32 parts48
  • 2 layers19.8 × 17.8 mmAdapter, the printed circuit board in 3D

    Adapter

    c0pperdragon/RetroMouse

    Adapter to attach PS/2 compatible mice to retro computers

    6 parts18
  • 4 layers40 × 27 mmH2cboard, the printed circuit board in 3D

    H2cboard

    c0pperdragon/HDMI2SCART

    19 parts7
  • 2 layers50 × 40.9 mmGR ATTiny LFO, the printed circuit board in 3D

    GR ATTiny LFO

    GadgetReboot/ATTiny_LFO

    Dual low frequency oscillators using ATTiny and MCP4725 DACs

    36 parts3
  • 2 layers77.2 × 50.3 mmDischarger, the printed circuit board in 3D

    Discharger

    Alan-JH/Batt-Discharger

    High current battery storage discharger for TJ UAV

    30 parts2
  • 2 layers58.3 × 98.6 mmScythe badge, the printed circuit board in 3D

    Scythe badge

    linted/opensource-hardware

    Hardware creations for the masses

    29 parts2
  • 2 layers61 × 74 mmGimbal, the printed circuit board in 3D

    Gimbal

    Alan-JH/Tiny-Gimbal

    Code and pcb for self stabilizing servo gimbal using BNO055 and ATTiny1624 for TJUAV

    23 parts1

Questions

How big is the Tx04 s PCB?

It measures 25 × 13 mm and has 2 copper layers, 1 mm thick.

What parts does the Tx04 s use?

14 parts, built around the ATTINY1604-SSF and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tx04 s KiCad files?

From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is proj/avr/tx04_s/tx04_s.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tx04 s design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).