

C3-wroom
- Size
- 21 × 41 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 24
- Pads
- 105
- Tracks, vias
- 162, 70
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2023
- Updated
- 27 Oct 2026
Overview
C3-wroom is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 21 × 41 mm with 15 parts on 24 nets, routed with 162 tracks and 70 vias.
It is built around the ESP32-C3-WROOM-02-H4 and WS2812B-2020. Its parts include 3 resistors, 3 connectors, 2 capacitors, 2 ICs and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | Library:PCB.MCBEERINGI.DEV_small | ||
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AP7333 | Package_TO_SOT_SMD:SOT-23-3 | U2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | LOGO | Library:mcbeeringi_icon_10mm | |
| 1 | OUT1 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | OUT2 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | SW_BOOT | Library:alps-skrg | SW1 |
| 1 | SW_BOOT | Library:alps-skrp | SW2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1 |
More from McbeEringi/pcb-stuff
12- 2 layers100 × 90 mm

- 2 layers95 × 100 mm

- 2 layers100 × 86 mm

- 2 layers100 × 100 mm

- 2 layers48 × 73 mm

- 2 layers92.5 × 98.4 mm

- 2 layers100 × 100 mm

- 2 layers100 × 99 mm

- 2 layers94 × 95.2 mm

- 2 layers44 × 44 mm

- 2 layers100 × 75 mm

- 2 layers24 × 49 mm

Similar boards
- 4 layers105 × 60 mm

Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
162 parts26 - 2 layers65 × 100 mm

- 2 layers22 × 48.8 mm

- 2 layers45.1 × 43.2 mm

Star Notifier
aayanrahman/Star-Notifier
Star-shaped USB-C ESP32-C3 board that lights up when Claude or Cursor is done
40 parts - 4 layers23 × 31.3 mm

Temperature node
cegea/temperature_node_hw
PCB design for a temperature sensor based on SHT and ESP32
36 partsGPL-3.0 - 4 layers144 × 133 mm

- 4 layers35.5 × 74.5 mm

Room environment monitor
kevinlutzer/room-environment-monitor
An IOT device built of the raspberry pi
57 parts - 2 layers94 × 63 mm

Questions
How big is the C3-wroom PCB?
It measures 21 × 41 mm and has 2 copper layers, 1.6 mm thick.
What parts does the C3-wroom use?
15 parts, built around the ESP32-C3-WROOM-02-H4 and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C3-wroom KiCad files?
From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is proj/esp/c3-wroom/c3-wroom.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the C3-wroom design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).