

Backup caps
Muscle Shirt Repo
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 61
- Pads
- 290
- Tracks, vias
- 122, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Nov 2024
- Updated
- 5 Dec 2024
Overview
Backup caps is an open-source printed circuit board by Mbutton-umich, from the Mbutton-umich/FlexGlO repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board with 99 parts on 61 nets, routed with 122 tracks and 0 vias.
It is built around the ESP32-C3-WROOM-02-N4, AD623ARMZ and RC0402FR-0710KL, with the RC0402FR-07100KL, T491A106K010AT and SJ1-42534-SMT-TR among its other parts. It belongs with the ESP32 and RISC-V boards of this library.
Main components
9ESP32-C3-WROOM-02-N4
SMD,20x18mm-105dBm -40℃~+85℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 Chip Integrated Bluetooth function、Support USB interface On-board PCB Antenna UART、SPI、I2C、I2S、JTAG、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAD623ARMZ
MSOP-8-40℃~+85℃ -6V~-2.5V、2.5V~6V 0.35% 0.3V/us 1 100dB 100nV/℃ 17nA 1V/V~1000V/V 2.7V~12V 200uV 250pA 305uA 30us 35nV/√Hz@1kHz 5pA/℃ 80dB External resistor gain Rail-to-rail output MSOP-8 Instrumentation Amplifiers ROHSAnalog DevicesInstrumentation AmplifiersRC0402FR-0710KL
UncategorisedUnknown makerRC0402FR-07100KL
UncategorisedUnknown makerT491A106K010AT
CASE-A-3216-18(mm)-55℃~+125℃ 10V 10uF 3.8Ω ±10% CASE-A-3216-18(mm) Tantalum Capacitors ROHSKEMETTantalum CapacitorsSJ1-42534-SMT-TR
SMD-25℃~+85℃ 16V 2.5mm Headphone Jack 300mA Brass、Copper alloy Silver SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)T491A685K016AT
CASE-A-3216-18(mm)-55℃~+125℃ 16V 3.5Ω 6.8uF ±10% CASE-A-3216-18(mm) Tantalum Capacitors ROHSKEMETTantalum CapacitorsRC0402FR-0741K2L
UncategorisedUnknown makerTLV1117LV33DCYR
SOT-223-40℃~+125℃@(TJ) 0.003%Vout 1 1.2V@(1A) 12V 1A 3.3V 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdSee the GitPages for a robust explanation.
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | CL05A105KO5NNNC | Footprints:CAP_CL05_SAM-M | C_ESP_D3, C_K_H1, C_K_H2, C_LDO1, C_LDO2, C_M_H1, C_M_H2, C_M_H3, C_M_H4, C_M_O1, C_M_O2, C_M_O3, C_M_O4 |
| 11 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | T_BP1, T_BP2, T_HP3, T_I1, T_I2, T_I3, T_LP1, T_LP2, T_N1, T_N2, TP_BP3 |
| 10 | RC0402FR-0710KL | Footprints:RC0402N_YAG-M | R_ESP_PU1, R_ESP_PU2, R_ESP_PU3, R_ESP_PU4, R_F_D1, R_F_D2, R_M_Q1, R_M_Q2, R_M_Q3, R_M_Q4 |
| 9 | CL05B104KO5NNNC | Footprints:CAP_CL05_SAM-M | C_ESP_D1, C_I_D1, C_I_D4, C_I_D6, C_K_D1, C_M_D1, C_M_D3, C_M_L2, C_M_L4 |
| 6 | RC0402FR-07100KL | Footprints:RC0402N_YAG-M | R_I_D1, R_I_D2, R_M_N1, R_M_N2, R_M_N3, R_M_N4 |
| 4 | RC0402FR-072K61L | Footprints:RESC1005X40N | R_M_O1, R_M_O2, R_M_O3, R_M_O4 |
| 4 | T491A106K010AT | Footprints:CAPMP3.4X1.6_1.8N_KEM-M | C_ESP_D2, C_I_D2, C_I_D3, C_I_D5 |
| 3 | AD623ARMZ | Footprints:RM_8_ADI-M | I_AMP1, I_AMP2, I_AMP3 |
| 3 | BM03B-SRSS-TBLFSN | Footprints:CONN_BM03B-SRSS-TBLFSN_JST | JST_3P1, JST_3P2, JST_3P3 |
| 3 | RC0402FR-07150RL | Footprints:RC0402N_YAG-M | R_I_G1, R_I_G2, R_I_G3 |
| 3 | SJ1-42534-SMT-TR | Footprints:CUI_SJ1-42534-SMT-TR | JACK1, JACK2, JACK3 |
| 3 | T491A685K016AT | Footprints:CAPMP3.4X1.6_1.8N_KEM-M | C_K_D2, C_M_D2, C_M_D4 |
| 2 | CL05B224KO5NNNC | Footprints:CAP_CL05_SAM-M | C_M_L1, C_M_L3 |
| 2 | CL05C220JB5NNNC | Footprints:CAP_CL05_SAM-M | C_ESP_USB1, C_ESP_USB2 |
| 2 | RC0402FR-071K5L | Footprints:RC0402N_YAG-M | R_M_L1, R_M_L3 |
| 2 | RC0402FR-0721KL | Footprints:RC0402N_YAG-M | R_M_H1, R_M_H3 |
| 2 | RC0402FR-073K01L | Footprints:RC0402N_YAG-M | R_M_L2, R_M_L4 |
| 2 | RC0402FR-0745K3L | Footprints:RC0402N_YAG-M | R_M_H2, R_M_H4 |
| 2 | TLV2464CDR | Footprints:D14-M | QUAD_AMP1, QUAD_AMP2 |
| 1 | BM02B-SRSS-TB LFSN | Footprints:CONN_BM02B-SRSS-TB_JST | JST_2P1 |
| 1 | CL05A334KA5NNNC | Footprints:CAP_CL05_SAM-M | C_K_L2 |
| 1 | CL05A474KP5NNNC | Footprints:CAP_CL05_SAM-M | C_K_L1 |
| 1 | ESP32-C3-WROOM-02-N4 | Footprints:IC18_ESP32-C3-WROOM-02-N4_EXP | ESP1 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO14580_Pad_TopBottom | H1 |
| 1 | PMS9P1B10M2QE | Footprints:SW_PMS9P1B10M2QE | BUTTON1 |
| 1 | RC0402FR-0741K2L | Footprints:RESC1005X40N | R_K_L1 |
| 1 | RC0402FR-07549KL | Footprints:RESC1005X40N | R_K_H1 |
| 1 | RC0402FR-07732KL | Footprints:RESC1005X40N | R_K_H2 |
| 1 | RC0402FR-0788K7L | Footprints:RC0402N_YAG-M | R_K_L2 |
| 1 | TLV1117LV33DCYR | Footprints:VREG_TLV1117LV33DCYR | LDO1 |
| 1 | TLV2462AIDR | Footprints:D8-M | DUAL_AMP1 |
| 1 | USB_RAW | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | USB_RAW1 |
More from Mbutton-umich/FlexGlO
1- 4 layers60 × 50.7 mm

Similar boards
- 4 layers60 × 81 mm

MYSTAT
matthew-yates/MYSTAT
Open source potentiostat/galvanostat hardware design files and required software.
93 parts9GPL-3.0 - 2 layers319 × 232 mm

- 2 layers61 × 61 mm

NMSpinnerBase
Ian-Blockmans/NMSpinner
if you want to connect the device to wifi for wireless control read the wireless controll pdf
31 parts - 2 layers100 × 75 mm

- 4 layers85 × 85 mm

- 4 layers53.5 × 65.5 mm

ChipigniteExplain
efabless/chipignite_discover
This FPGA experimentation and development board was developped for efabless chipignite workshops and labs to serve as an easy to use experimentation board and stepping stone towards ASIC digital design, allowing for…
251 parts2Apache-2.0 - 2 layers237.3 × 103.7 mm

- 4 layers104.5 × 81 mm

Tinytapeout demo
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
309 parts3.1kGPL-3.0
Questions
What parts does the Backup caps use?
99 parts, built around the ESP32-C3-WROOM-02-N4, AD623ARMZ, RC0402FR-0710KL and RC0402FR-07100KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Backup caps KiCad files?
From the Mbutton-umich/FlexGlO repository on GitHub, at the commit this page was made from: the board is _site/PCB/FlexGlO/backup_caps.kicad_pcb and its schematic PCB/FlexGlO/EKG_filter1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Backup caps design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).