2 layers60 × 11.4 mm
NMSpinnerLight
Ian-Blockmans/NMSpinner
if you want to connect the device to wifi for wireless control read the wireless controll pdf
12 parts
2 layers61 × 61 mm
NMSpinnerBase
Ian-Blockmans/NMSpinnerif you want to connect the device to wifi for wireless control read the wireless controll pdf
- Size
- 61 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 28
- Pads
- 114
- Tracks, vias
- 153, 171
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Jul 2024
- Updated
- 11 Apr 2026
Overview
NMSpinnerBase is an open-source printed circuit board by Ian-Blockmans, from the Ian-Blockmans/NMSpinner repository on GitHub. It is a 2-layer board of 61 × 61 mm with 31 parts on 28 nets, routed with 153 tracks and 171 vias.
It is built around the ESP32-C3-WROOM-02-N4, TLV1117LV33DCYR and ESDALD05UE2X, with the TSD05CDYFR among its other parts. Its parts include 5 resistors, 3 capacitors, 3 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4
ESP32-C3-WROOM-02-N4
SMD,20x18mm-105dBm -40℃~+85℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 Chip Integrated Bluetooth function、Support USB interface On-board PCB Antenna UART、SPI、I2C、I2S、JTAG、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TLV1117LV33DCYR
SOT-223-40℃~+125℃@(TJ) 0.003%Vout 1 1.2V@(1A) 12V 1A 3.3V 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ESDALD05UE2X
SOT-23-3L-55℃~+150℃ 0.5pF 100nA 15V 2 4A@8/20us 5V 60W@8/20us 9V IEC 61000-4-2、IEC 61000-4-5 TVS SOT-23-3L ESD and Surge Protection (TVS/ESD) ROHSWeEn SemiconductorsESD And Surge Protection (TVS/ESD)
TSD05CDYFR
SOD-323-40℃~+125℃ 11.5V 30A@8/20us 400W@8/20us 4pF 5.5V 50nA 8V Bidirectional IEC 61000-4-2、IEC 61000-4-5 TVS SOD-323 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
README
readme.mddesign files for Spinning NightMode logo lamp
if you want to connect the device to wifi for wireless control read the wireless controll pdf
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H3, H4 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 2 | R_Potentiometer | ComponentSearch:Potentiometer_Bourns_TC33X_Vertical | RV1, RV2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_02x04_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | DRV8210DRLR | ComponentSearch:SOTFL50P160X60-6N | IC2 |
| 1 | ESDALD05UE2X | ComponentSearch:SOT95P240X115-3N | D2 |
| 1 | ESP32-C3-WROOM-02-N4 | ComponentSearch:ESP32C3WROOM02N4 | IC1 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Motor_DC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | M1 |
| 1 | SW_SPST | ComponentSearch:DS01254L01BE | SW1 |
| 1 | SW_SPST | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW2 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | TLV1117LV33DCYR | ComponentSearch:SOT230P700X180-4N | IC3 |
| 1 | TSD05CDYFR | ComponentSearch:SOD2613X100N | D3 |
| 1 | USB_C_Receptacle_USB2.0_16P | ComponentSearch:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
The 30 most common of 31 parts.
More from Ian-Blockmans/NMSpinner
1Similar boards
- 6 layers10.2 × 163.8 mm
RP2040-Breadstick
Breadstick-Innovations/Raspberry-Breadstick
A Breadstick development board based around the Raspberry Pi Foundation's RP2040 microcontroller.
94 parts19Apache-2.0 - 2 layers100 × 100 mm
- 2 layers60 × 111.3 mm
Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0 - 2 layers64.5 × 120.5 mm
X de link
Monacrylic/Pinscope-benchmark-circuits
This repository contains a suite of sample KiCad circuits used as benchmarks for Pinscope.
122 parts2 - 2 layers62.4 × 115 mm
- 4 layers62 × 105 mm
PT100 Datalogger
rasusmilch/PT100_Mesh_Datalogger
This application turns an ESP32-S3 N8R2 into a UTC-centric PT100 data logger with FRAM-first buffering, SD-card CSV batching/verification, DS3231 RTC support, mesh streaming, and serial-console calibration.
139 parts - 2 layers100 × 75 mm
- 4 layers
Questions
How big is the NMSpinnerBase PCB?
It measures 61 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NMSpinnerBase use?
31 parts, built around the ESP32-C3-WROOM-02-N4, TLV1117LV33DCYR, ESDALD05UE2X and TSD05CDYFR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NMSpinnerBase KiCad files?
From the Ian-Blockmans/NMSpinner repository on GitHub, at the commit this page was made from: the board is NMSpinnerBase/NMSpinnerBase.kicad_pcb and its schematic NMSpinnerBase/NMSpinnerBase.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NMSpinnerBase design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ian-Blockmans before reusing the design.