
OSDEHA AMP
mbrennwa/OSDEHA
Amplifier for electrostatic headphones using directly heated triodes in the output stage

Amplifier for electrostatic headphones using directly heated triodes in the output stage
OSDEHA PSU is an open-source printed circuit board by mbrennwa, from the mbrennwa/OSDEHA repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 239.3 × 78.3 mm with 114 parts on 66 nets, routed with 408 tracks and 4 vias.
It is built around the IXCP10M90S, LM1085IT-ADJ/NOPB and NE555P, with the CMF551K0000BE, STTH512FP and LND150N3-G among its other parts. Its parts include 36 resistors, 29 diodes, 14 capacitors, 14 transistors and 9 connectors. It belongs with the audio and music and power boards of this library.
The OSDEHA is an open-hardware electrostatic headphone amplifier based on directly heated triodes (DHTs).
It is designed for DIY builders who value simplicity, transparency, and full access to the underlying circuit and mechanical design.
The project is developed openly, with design discussion and iteration happening in the DIY audio community. All design files required to manufacture and assemble the amplifier are provided.
⚠️ Warning: This project involves lethal voltages. Do not attempt to build or operate this amplifier unless you understand and respect high-voltage safety practices.
Project homepage:
https://mbrennwa.github.io/OSDEHA/
Design discussion and build feedback:
https://www.diyaudio.com/community/threads/open-source-dht-estat-headphone-amp-osdeha.407679/
This project is licensed under the CERN Open Hardware Licence v2 – Strongly Reciprocal (CERN-OHL-S-2.0).
You are free to:
Under the condition that derivative works remain open under the same license.
Any physical implementation of this design must carry a visible license notice on the outside of the amplifier enclosure, as required by the CERN-OHL-S-2.0.
See LICENSE.txt for details.
Thanks to the diyAudio community for discussion, testing, and feedback during development.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17, R18, R19, R23, R24, R25, R29, R30, R31, R34, R35, R36 |
| 12 | STTH512FP | Package_TO_SOT_THT:TO-220-2_Vertical | D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 |
| 6 | LND150 | Package_TO_SOT_THT:TO-92_HandSolder | Q3, Q4, Q7, Q8, Q11, Q12 |
| 4 | 100n 1 kV | Capacitor_THT:C_Rect_L18.0mm_W9.0mm_P15.00mm_FKS3_FKP3 | C5, C6, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SBT1845-3G | Package_TO_SOT_THT:TO-220-2_Vertical | D1, D2, D3, D4 |
| 3 | 10 V | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D24, D25, D26 |
| 3 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16, R22, R28 |
| 3 | 1N4007 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_KathodeUp | D27, D28, D29 |
| 3 | 1k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2, RV3, RV4 |
| 3 | 2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21, R27, R33 |
| 3 | 300 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20, R26, R32 |
| 3 | 4.7u 630 V | Capacitor_THT:C_Rect_L41.5mm_W20.0mm_P37.50mm_MKS4 | C12, C13, C14 |
| 3 | FJPF5027OTU | Package_TO_SOT_THT:TO-220F-3_Vertical | Q6, Q16, Q17 |
| 3 | NTHL1000N170M1 | Package_TO_SOT_THT:TO-247-3_Vertical | Q5, Q9, Q13 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R12, R13 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D5, D7 |
| 2 | 200 V | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D8, D9 |
| 2 | 22u 16 V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C7, C8 |
| 2 | 350 VAC / 200 mA | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2 |
| 2 | 470u 550 VDC | Capacitor_THT:CP_Radial_D35.0mm_P10.00mm_SnapIn | C1, C2 |
| 2 | 866k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 1.1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1.91k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 100 5 W | Resistor_THT:R_Axial_DIN0918_L18.0mm_D9.0mm_P22.86mm_Horizontal | R15 |
| 1 | 10000u 25 V | Capacitor_THT:CP_Radial_D25.0mm_P10.00mm_SnapIn | C4 |
| 1 | 100n | Capacitor_THT:C_Rect_L26.5mm_W8.5mm_P22.50mm_MKS4 | C11 |
| 1 | 10M90S | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | 180 V | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D10 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D6 |
| 1 | 220u 630 VDC | Capacitor_THT:CP_Radial_D35.0mm_P10.00mm_SnapIn | C3 |
| 1 | 2M | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 3.3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11 |
| 1 | 4.7M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14 |
| 1 | 420 VAC / 70 mA | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5 |
| 1 | 866k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6 |
| 1 | 9 VAC / 4.5 A | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | BD138 | Package_TO_SOT_THT:TO-126-3_Vertical | Q1 |
| 1 | GBJ3510 | Diode_THT:Diode_Bridge_32.0x5.6x17.0mm_P10.0mm_P7.5mm | D11 |
| 1 | HEATERS-LEFT | Connector_Molex:Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical | J8 |
| 1 | HEATERS-RIGHT | Connector_Molex:Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical | J9 |
| 1 | HV-L | Connector_Molex:Molex_KK-396_A-41791-0004_1x04_P3.96mm_Vertical | J6 |
| 1 | HV-R | Connector_Molex:Molex_KK-396_A-41791-0004_1x04_P3.96mm_Vertical | J7 |
| 1 | LM1085-ADJ | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | CHASSIS1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | RT424006 | Relay_THT:Relay_DPDT_Schrack-RT2-FormC_RM5mm | K1 |
| 1 | Stator bias | Connector_Molex:Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical | J5 |

mbrennwa/OSDEHA
Amplifier for electrostatic headphones using directly heated triodes in the output stage

mbrennwa/OSDEHA
Amplifier for electrostatic headphones using directly heated triodes in the output stage





Jack05325/ProgrettiHensemberger
Benvenuto in questa repository! Qui troverai una raccolta di progetti che ho realizzato per l'ITI P. Hensemberger.


baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
It measures 239.3 × 78.3 mm and has 2 copper layers, 1.6 mm thick.
114 parts, built around the IXCP10M90S, LM1085IT-ADJ/NOPB, NE555P and CMF551K0000BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mbrennwa/OSDEHA repository on GitHub, at the commit this page was made from: the board is kicad/powersupply/OSDEHA_PSU.kicad_pcb and its schematic kicad/amplifier/Bias.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).