Skip to the content
2 layers66.4 × 36.4 mmScreen hexpansion, the printed circuit board in 3D

Screen Hexpansion for your Tildagon

Size
66.4 × 36.4 mm
Copper layers
2
Thickness
1 mm
Parts
8
Nets
13
Pads
59
Tracks, vias
83, 9
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Jun 2026
Updated
21 Jul 2026

Overview

Screen hexpansion is an open-source printed circuit board by mbooth101, from the mbooth101/emf-screen-hexpansion repository on GitHub, published under the MIT licence. It is a 2-layer board of 66.4 × 36.4 mm with 8 parts on 13 nets, routed with 83 tracks and 9 vias.

It is built around the AT24C256C-SSHL-T. Its parts include 2 resistors, 2 ICs and 1 connector.

Main components

1

README

README.md

Screen Hexpansion

More screens is more better. Plug-in an auxialliary screen or two to maximise the amount of data you can display at a time! Or use them to create a multiocular Tildagon, just like everyone's favourite unicode glyph, the multiocular O "ꙮ".

Firmware Install/Update

Over-The-Air

You can initialise (and subsequently update) the Screen Hexpansion's firmware using the Tildagon badge's built-in "Hexpansions" app. Select the port it's plugged into and enter the VID 0x4D42 and PID 0x5EE5 to get the correct firmware.

Manually

If you need to manually re-flash the Hexpansion firmware for any reason, or you want to install custom firmware, you can do so by inserting the Screen Hexpansion into port 2 of your Tildagon, and running the following commands:

text
cd emf-screen-hexpansion
mpremote mount EEPROM + run EEPROM/prepare_eeprom.py + cp EEPROM/app.py :/hexpansion/app.py

Once complete, the Screen Hexpansion may be inserted into any port. The script is just hard-coded to port 2 for flashing the firmware.

License

This repo is MIT licensed and CERN Open Hardware licensed.

Parts

8
QtyValueFootprintReferences
24.7kΩResistor_SMD:R_0603_1608MetricR1, R2
2MountingHole_PadMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2
1AT24C256C-SSHL-TPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1Hexpansion-Connectortildagon:hexpansion-edge-connectorJ1
1~tildagon:PinHeader_1x07_P2.54mm_Vertical_LockPadsU1

The 7 most common of 8 parts.

Similar boards

  • 2 layers391 × 131.1 mmAustin, the printed circuit board in 3D

    Austin

    AcheronProject/Austin

    Austin PCB

    599 parts18
  • 2 layers285.8 × 95.3 mmLegshark65 rev2, the printed circuit board in 3D

    Legshark65 rev2

    jemmec/legshark

    An open source 60% (15 by 5) ortholinear keyboard designed with both flexability and familiarity in mind.

    210 parts3MIT
  • 6 layers47 × 105 mmCompactPi, the printed circuit board in 3D

    CompactPi

    loganrf/compactPi

    compactPi is a project to develop a compact Raspberry Pi Compute Module carrier suitable for ArduPilot applications. It's primarily targeted at marine applications (ArduSub/ArduRover).

    127 parts2CERN-OHL-S-2.0
  • 2 layers344.7 × 123.1 mmAthena, the printed circuit board in 3D

    Athena

    BenjaminJAnderson/Orthodox

    557 parts1
  • 2 layers90 × 65 mmHackeriot board 2025, the printed circuit board in 3D

    Hackeriot board 2025

    bmeisels/hackeriot_board

    Hackeriot Board is a research target for learning about Hardware Reverse Engineering. The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.

    116 parts1
  • 2 layers35.1 × 62.7 mmEMO SN65 OBD, the printed circuit board in 3D

    EMO SN65 OBD

    darshanram008/EMO_OBD_tool

    On board diagnostic tool for Battery management system

    116 parts1
  • 6 layers40 × 100 mmDigi, the printed circuit board in 3D

    Digi

    cookiemonsternz/Eurorack-DIGI

    DIGI utilises an ice40UP5K fpga chip, featuring 5280 luts and a 48Mhz clock. This is accompanied by a USB-SPI interface for easy programming.

    139 parts
  • 4 layers100 × 72 mmRtl8367-switch, the printed circuit board in 3D

    Rtl8367-switch

    Deco025/rtl8367-switch

    Five-port gigabit unmanaged Ethernet switch based on the Realtek RTL8367RB - 4-layer KiCad 10 design with fabrication outputs

    229 partsCERN-OHL-S-2.0

Questions

How big is the Screen hexpansion PCB?

It measures 66.4 × 36.4 mm and has 2 copper layers, 1 mm thick.

What parts does the Screen hexpansion use?

8 parts, built around the AT24C256C-SSHL-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Screen hexpansion KiCad files?

From the mbooth101/emf-screen-hexpansion repository on GitHub, at the commit this page was made from: the board is hardware/screen-hexpansion.kicad_pcb and its schematic hardware/screen-hexpansion.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Screen hexpansion design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).