

Screen hexpansion
Screen Hexpansion for your Tildagon
- Size
- 66.4 × 36.4 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 8
- Nets
- 13
- Pads
- 59
- Tracks, vias
- 83, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jun 2026
- Updated
- 21 Jul 2026
Overview
Screen hexpansion is an open-source printed circuit board by mbooth101, from the mbooth101/emf-screen-hexpansion repository on GitHub, published under the MIT licence. It is a 2-layer board of 66.4 × 36.4 mm with 8 parts on 13 nets, routed with 83 tracks and 9 vias.
It is built around the AT24C256C-SSHL-T. Its parts include 2 resistors, 2 ICs and 1 connector.
Main components
1README
README.mdScreen Hexpansion
More screens is more better. Plug-in an auxialliary screen or two to maximise the amount of data you can display at a time! Or use them to create a multiocular Tildagon, just like everyone's favourite unicode glyph, the multiocular O "ꙮ".
Firmware Install/Update
Over-The-Air
You can initialise (and subsequently update) the Screen Hexpansion's firmware using the Tildagon badge's built-in "Hexpansions" app. Select the port it's plugged into and enter the VID 0x4D42 and PID 0x5EE5 to get the correct firmware.
Manually
If you need to manually re-flash the Hexpansion firmware for any reason, or you want to install custom firmware, you can do so by inserting the Screen Hexpansion into port 2 of your Tildagon, and running the following commands:
cd emf-screen-hexpansion
mpremote mount EEPROM + run EEPROM/prepare_eeprom.py + cp EEPROM/app.py :/hexpansion/app.pyOnce complete, the Screen Hexpansion may be inserted into any port. The script is just hard-coded to port 2 for flashing the firmware.
License
This repo is MIT licensed and CERN Open Hardware licensed.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7kΩ | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2 |
| 1 | AT24C256C-SSHL-T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Hexpansion-Connector | tildagon:hexpansion-edge-connector | J1 |
| 1 | ~ | tildagon:PinHeader_1x07_P2.54mm_Vertical_LockPads | U1 |
The 7 most common of 8 parts.
Similar boards
- 2 layers391 × 131.1 mm

- 2 layers285.8 × 95.3 mm

Legshark65 rev2
jemmec/legshark
An open source 60% (15 by 5) ortholinear keyboard designed with both flexability and familiarity in mind.
210 parts3MIT - 6 layers47 × 105 mm

CompactPi
loganrf/compactPi
compactPi is a project to develop a compact Raspberry Pi Compute Module carrier suitable for ArduPilot applications. It's primarily targeted at marine applications (ArduSub/ArduRover).
127 parts2CERN-OHL-S-2.0 - 2 layers344.7 × 123.1 mm

- 2 layers90 × 65 mm

Hackeriot board 2025
bmeisels/hackeriot_board
Hackeriot Board is a research target for learning about Hardware Reverse Engineering. The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.
116 parts1 - 2 layers35.1 × 62.7 mm

EMO SN65 OBD
darshanram008/EMO_OBD_tool
On board diagnostic tool for Battery management system
116 parts1 - 6 layers40 × 100 mm

Digi
cookiemonsternz/Eurorack-DIGI
DIGI utilises an ice40UP5K fpga chip, featuring 5280 luts and a 48Mhz clock. This is accompanied by a USB-SPI interface for easy programming.
139 parts - 4 layers100 × 72 mm

Rtl8367-switch
Deco025/rtl8367-switch
Five-port gigabit unmanaged Ethernet switch based on the Realtek RTL8367RB - 4-layer KiCad 10 design with fabrication outputs
229 partsCERN-OHL-S-2.0
Questions
How big is the Screen hexpansion PCB?
It measures 66.4 × 36.4 mm and has 2 copper layers, 1 mm thick.
What parts does the Screen hexpansion use?
8 parts, built around the AT24C256C-SSHL-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Screen hexpansion KiCad files?
From the mbooth101/emf-screen-hexpansion repository on GitHub, at the commit this page was made from: the board is hardware/screen-hexpansion.kicad_pcb and its schematic hardware/screen-hexpansion.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Screen hexpansion design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).