2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers68.6 × 53.3 mm
GRBL Stepcraft
maz3max/Stepcraft-GRBLArduino Uno Shield for Stepcraft GRBL Controller
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 35
- Pads
- 65
- Tracks, vias
- 102, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Jun 2017
- Updated
- 12 Jun 2017
Overview
GRBL Stepcraft is an open-source printed circuit board by maz3max, from the maz3max/Stepcraft-GRBL repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 53.3 mm with 10 parts on 35 nets, routed with 102 tracks and 12 vias.
README
README.mdStepcraft-GRBL
Arduino Uno Shield for Stepcraft GRBL Controller
This is a shield to control STEPCRAFT mills via the LPT port.
(it could be easily modified to work without the LPT module directly plugged into the X1 socket)
An Arduino UNO is used with GRBL firmware and this shield.
The build option USE_SPINDLE_DIR_AS_ENABLE_PIN is needed for GRBL to work with this shield.
It works like a charm on the STEPCRAFT-2/840 with HF500 Spindle attached.
Created with KiCAD, pcb2gcodeGUI and milled on the STEPCRAFT mill itself.
The copyrights of the uploaded manuals are owned by STEPCRAFT.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | DB25_FEMALE | Connectors:DB25FC | J1 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | PROBE | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
Questions
How big is the GRBL Stepcraft PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GRBL Stepcraft use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GRBL Stepcraft KiCad files?
From the maz3max/Stepcraft-GRBL repository on GitHub, at the commit this page was made from: the board is GRBL_Stepcraft.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GRBL Stepcraft design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0