mayermakes/GimmeGPIO35hardware to add GPIO to any PC running Linux
GimmeGPIO is an open-source printed circuit board by mayermakes, from the mayermakes/GimmeGPIO repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 65 × 30 mm with 24 parts on 50 nets, routed with 503 tracks and 119 vias.
It is built around the ESP32-S2-MINI-1-N4. Its parts include 6 capacitors, 6 resistors, 3 connectors, 2 ICs and 2 switches. It belongs with the ESP32 boards of this library.
hardware to add GPIO to any PC running Linux
basic test, pins and pwm working updated FW python library working. pushed changes. case fits.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 3 | 0,1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C7 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R16, R21 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R19, R20 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R17, R18 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2171790001 | USB-C_20_molex:MOLEX_2171790001 | J4 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | Conn_01x04_UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | ESP32-S2-MINI-1 | Espressif:ESP32-S2-MINI-1U | U1 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | MCP1825S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS810 | SW2 |
| 1 | Val** | e14:e14presents logo 10mm silk and copper v2 | Ref** |
It measures 65 × 30 mm and has 4 copper layers, 1.6 mm thick.
24 parts, built around the ESP32-S2-MINI-1-N4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mayermakes/GimmeGPIO repository on GitHub, at the commit this page was made from: the board is GimmeGPIO/GimmeGPIO.kicad_pcb and its schematic GimmeGPIO/GimmeGPIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
isosloth/lightcontroller
Diese Software wurde von 2 Schülern der Schule / Bühnentechnik geschrieben und ist unter der Gnu General Public License (Version 3) lizenziert (https://www.gnu.org/licenses/gpl-3.0.en.html)
alexmorten/mini_lolly
Run any kind of static file server in the repo root to run the simulator. For example, you can use the following commands as a server:
grimsteel/homeassistant-rf-bridge
MQTT-based Home Assistant RF + IR bridge
BenjaminJAnderson/CUBE
CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and…
FunDeckHermit/WasteIndicator
Scripts that modify Tasmota to interact with the Ximmio waste API
LStranc/WeatherStation
A Wifi Weather Station for personal use at home. Contains Gerber files, microcontroller code, and server code.
