4 layers65 × 75 mm
HomeAssistant
WojciechM98/Home-assistant-ESP32
Home assistand board using ESP32 controlled with MQTT protocol.
151 parts
2 layers30 × 51 mm
WasteIndicator
FunDeckHermit/WasteIndicatorScripts that modify Tasmota to interact with the Ximmio waste API
- Size
- 30 × 51 mm
- Copper layers
- 2
- Thickness
- 1.59 mm
- Parts
- 16
- Nets
- 49
- Pads
- 135
- Tracks, vias
- 150, 34
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Jun 2024
- Updated
- 15 Aug 2024
Overview
WasteIndicator is an open-source printed circuit board by FunDeckHermit, from the FunDeckHermit/WasteIndicator repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 51 mm with 16 parts on 49 nets, routed with 150 tracks and 34 vias.
It is built around the ESP32-S2-MINI-1-N4, AMS1117-3.3 and SK6812, with the USB4500-03-0-A among its other parts. Its parts include 4 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 diode. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-S2-MINI-1-N4
SMD-65P-40℃~+85℃ -97dBm 19.5dBm 2.4GHz 310mA 3V~3.6V 63mA ESP32-S2FH4 Chip On-board PCB Antenna Support USB interface UART、SPI、I2C、I2S、USB SMD-65P WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
USB4500-03-0-A
SMD-25℃~+85℃ 1 24P 48V 5A Black Female Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdWaste Indicator
Scripts that modify Tasmota to interact with the Ximmio waste API. The color of an LED is set the day before a pickup date. It should also be easy to integrate into Home Assistant.
What it does:
- Sets the color of an RGB LED on the day before a pickup date
- Hides the RGB LED controls from Tasmota's main page
- Adds a form to set home adres
- Queries Ximmio's API to get the uniqueID of the adres
- Queries pickup dates every 12 hours
- Add a button to turn the LED off
- Save configuration during reset
- Reset configuration when holding button 8 seconds
To-do
- Integrate into Home Assistant
- Don't use the companyCode of my local waste collector
- Test with a Tasmota compatible RGB light bulb
- Blink LED on first boot
How to flash
Use a Webserial based ESP32 flasher or use ESPtool from the command line to flash the PCB. First solder the "Boot" jumper, then hold the button to get the ESP32 into boot mode.
esptool --port /dev/ttyACM0 erase_flash
esptool --port /dev/ttyACM0 write_flash 0x0 tasmota32s2.factory.bin
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric | C101, C102, C103, C104 |
| 4 | 5K1 | Resistor_SMD:R_0603_1608Metric | R1, R101, R102, R103 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP101, JP102 |
| 1 | 430172085816 | _projectlib:btn_momentary_430172085816 | SW101 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U102 |
| 1 | Conn_01x10_Socket | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J102 |
| 1 | ESP32-S2-MINI-1 | _projectlib:ESP32-S2-MINI-1 | U101 |
| 1 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D101 |
| 1 | USB4500-03-0-A | _projectlib:USB_C_Receptacle_USB4500-03-0-A | J101 |
Questions
How big is the WasteIndicator PCB?
It measures 30 × 51 mm and has 2 copper layers, 1.59 mm thick.
What parts does the WasteIndicator use?
16 parts, built around the ESP32-S2-MINI-1-N4, AMS1117-3.3, SK6812 and USB4500-03-0-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WasteIndicator KiCad files?
From the FunDeckHermit/WasteIndicator repository on GitHub, at the commit this page was made from: the board is KiCAD files/Waste Indicator.kicad_pcb and its schematic KiCAD files/Waste Indicator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WasteIndicator design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers31.2 × 45.8 mm
Esp32-homeassistant rf bridge
grimsteel/homeassistant-rf-bridge
MQTT-based Home Assistant RF + IR bridge
47 parts1GPL-3.0 - 2 layers85.1 × 119.9 mm
- 4 layers205 × 140 mm
- 2 layers28 × 65 mm
- 4 layers50 × 50 mm
- 2 layers45 × 52.5 mm
Caravel breakout fpga ICE40UP5K TT3
TinyTapeout/breakout-pcb
Tiny Tapeout breakout PCBs
234 parts22Apache-2.0 - 2 layers100 × 60 mm
