2 layers88.9 × 61.6 mm
4 layers90 × 55 mm
Raspberry cm3-rocket
maxswjeon/raspberry-cm3-rocket- Size
- 90 × 55 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 165
- Pads
- 470
- Tracks, vias
- 701, 102
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jun 2025
- Updated
- 12 Jun 2025
Overview
Raspberry cm3-rocket is an open-source printed circuit board by maxswjeon, from the maxswjeon/raspberry-cm3-rocket repository on GitHub. It is a 4-layer board of 90 × 55 mm with 51 parts on 165 nets, routed with 701 tracks and 102 vias.
It is built around the TUSB3210PM, BSS138 and SSM3J338R,LF. Its parts include 12 resistors, 12 connectors, 5 capacitors, 3 ICs and 2 diodes.
Main components
3
TUSB3210PM
LQFP-64_L10.0-W10.0-P0.50-LS12.0-TLLQFP-64(10x10) New Arrivals ROHSTexas InstrumentsUncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
SSM3J338R,LF
SOT-23F1 P-Channel 1.4nF 12V 15.9mΩ@4.5V 19.5nC@4.5V 1V 1W 225pF 250pF 6A P-Channel SOT-23F MOSFETs ROHSToshibaMOSFETs
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP3, JP4, JP5, JP6, JP7, JP8, JP9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R37, R38, R39 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R33, R34 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R24, R25 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | TP_GND | TestPoint:TestPoint_Pad_D1.0mm | TP11, TP12 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 135k | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 2.2u | Inductor_SMD:L_Coilcraft_XAL5030-XXX | L3 |
| 1 | 2997 | SamSys_Parts:2997 | U2 |
| 1 | 47u | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 56p | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 887k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q14 |
| 1 | CAM0 | SamSys_Parts:545482271 | J8 |
| 1 | CAM1 | SamSys_Parts:545482271 | J9 |
| 1 | Conn_01x03 | Connector_Wire:SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm | J10 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | GPIO_30 | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Horizontal | J4 |
| 1 | GPIO_40 | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Horizontal | J2 |
| 1 | GPIO_CENTER | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Horizontal | J3 |
| 1 | GPIO_POWER | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Horizontal | J6 |
| 1 | GPIO_POWER_DATA | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Horizontal | J7 |
| 1 | JMP_EMMC_DISABLE | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | PWR_SCL_JMP | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP11 |
| 1 | PWR_SDA_JMP | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP10 |
| 1 | SODIMM-200_Split | SamSys_Parts:14731494 | J1 |
| 1 | SSM3J338R,LF | SamSys_Parts:SSM3J332RLFT | Q11 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW2 |
| 1 | TPS565242DRLR | SamSys_Parts:SOTFL50P160X60-6N | IC2 |
| 1 | TUSB321 | Package_DFN_QFN:Texas_X2QFN-12_1.6x1.6mm_P0.4mm | U1 |
| 1 | USB_C_DATA | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J18 |
| 1 | USB_C_POWER | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J19 |
Similar boards
- 2 layers
G Love
AlexEsqu/G-Love
[G-Love] est un projet de conception d’un système de vêtement électronique (wearable) porté sur les bras., intégrant des bandes LEDSs RGB réactives à l’environnement et aux mouvements du porteur.
154 parts2 - 4 layers55.5 × 64 mm
Industrial usb hub
shyver/Industrial-USB3-Hub-USB5744
A custom 4-layer, 4-port industrial USB 3.0 (5Gbps) hub based on the Microchip USB5744. Features strict 90Ω impedance control, per-port power distribution, and robust ESD protection."
96 parts1MIT - 4 layers68.6 × 56 mm
Cartridge
coco-chameleon/chameleon-hardware
TRS-80 Color Computer cartridge emulator
95 partsCERN-OHL-W-2.0 - 4 layers37.8 × 99.8 mm
- 4 layers87.5 × 40.2 mm
- 4 layers90 × 65 mm
FlySensei Stack RPi ECAD
denjos007/FlySensei_Stack_ECAD
PCB Design for the Stacked design for Blimp Controller
95 parts - 2 layers15.2 × 71.1 mm
Questions
How big is the Raspberry cm3-rocket PCB?
It measures 90 × 55 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Raspberry cm3-rocket use?
51 parts, built around the TUSB3210PM, BSS138 and SSM3J338R,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raspberry cm3-rocket KiCad files?
From the maxswjeon/raspberry-cm3-rocket repository on GitHub, at the commit this page was made from: the board is raspberry-cm3-rocket.kicad_pcb and its schematic compute_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raspberry cm3-rocket design in my own project?
Its repository states no licence, so its author keeps all rights: ask maxswjeon before reusing the design.