2 layers40.6 × 20 mm
ESP WeatherStation v2.0
maxnil/ESP_WeatherSensor_v2.0_PCB
Weather sensor v2.0 (temperature, humidity and air pressure) based around a ESP8266 module
39 parts
2 layers40 × 20 mm
ESP WeatherSensor PCB
maxnil/ESP_WeatherSensor_PCBWeather sensor (temperature, humidity and air pressure) based around a ESP8266 module
- Size
- 40 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 25
- Pads
- 78
- Tracks, vias
- 252, 15
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Mar 2018
- Updated
- 17 May 2019
Overview
ESP WeatherSensor PCB is an open-source printed circuit board by maxnil, from the maxnil/ESP_WeatherSensor_PCB repository on GitHub. It is a 2-layer board of 40 × 20 mm with 19 parts on 25 nets, routed with 252 tracks and 15 vias.
It is built around the ESP-12F and BMP280. Its parts include 7 resistors, 5 capacitors, 5 ICs, 1 diode and 1 connector. It belongs with the ESP8266 boards of this library.
Main components
2
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure Sensors
README
README.mdESP_WeatherStation_PCB
Simple weather station (temperature, humidity and air pressure) based around a ESP8266 module
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistors_SMD:R_0603 | R1, R5, R6, R7 |
| 3 | 0.1u | Capacitors_SMD:C_0603 | C3, C4, C5 |
| 2 | 1u | Capacitors_SMD:C_0603 | C1, C2 |
| 1 | 1k | Resistors_SMD:R_0603 | R4 |
| 1 | 4.7k | Resistors_SMD:R_0603 | R2 |
| 1 | 82 | Resistors_SMD:R_0603 | R3 |
| 1 | AZ1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | BMP280 | MaxNil:BOSCH_BMP280 | U4 |
| 1 | Con1 | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm_SMD | J1 |
| 1 | DS1821C | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | U5 |
| 1 | ESP-12F | ESP8266:ESP-12E_SMD | U2 |
| 1 | Si7021 | Housings_DFN_QFN:DFN-6-1EP_3x3mm_Pitch0.95mm | U3 |
| 1 | White LED | LEDs:LED_0603 | D1 |
Questions
How big is the ESP WeatherSensor PCB PCB?
It measures 40 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP WeatherSensor PCB use?
19 parts, built around the ESP-12F and BMP280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP WeatherSensor PCB KiCad files?
From the maxnil/ESP_WeatherSensor_PCB repository on GitHub, at the commit this page was made from: the board is test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP WeatherSensor PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask maxnil before reusing the design.
Similar boards
- 2 layers55 × 82.7 mm
- 2 layers51.4 × 61 mm
- 2 layers50 × 38 mm
- 2 layers33.7 × 66 mm
Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0 - 2 layers49.4 × 35.8 mm
WS2812Controller
klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes
22 parts82MIT - 4 layers20 × 48.5 mm
Midea WiFi Dongle
reneklootwijk/mideahvac-dongle
This repository contains the hardware design of a WiFi dongle for Midea-like airconditioners and humidifiers. Midea provides a WiFi dongle (SK102/SK103), either as optional feature or built-in, to control the appliances…
21 parts75 - 2 layers31.4 × 20.6 mm
Window sensor V5
gadjet/Window-Door-sensor-Version-5
Version 5 of the Window/Door sensor project this time with ultra low current consumption
32 parts70GPL-2.0