

- Size
- 103.5 × 90.7 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 78
- Nets
- 78
- Pads
- 301
- Tracks, vias
- 413, 76
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Oct 2023
- Updated
- 20 Oct 2023
Overview
Badge is an open-source printed circuit board by maxgrim, from the maxgrim/RedTreat2023Badge repository on GitHub. It is a 4-layer board of 103.5 × 90.7 mm with 78 parts on 78 nets, routed with 413 tracks and 76 vias.
It is built around the ESP32-MINI-1-N4, MAX98357AETE+T and XC6220B331MR, with the USBLC6-2SC6, PBY160808T-102Y-N and GSPK2307P-8R1W among its other parts. Its parts include 33 capacitors, 15 diodes, 11 resistors, 5 ICs and 2 switches. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
9ESP32-MINI-1-N4
SMD-55P,19.0x13.2mm-40℃~+85℃ -98dBm 13dBm 2.3V~3.6V 2.4GHz 240mA 95mA Bluetooth4.2 ESP32-U4WDH On-board PCB Antenna UART、SDIO、SPI、I2C、I2S SMD-55P,19.0x13.2mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX98357AETE+T
TQFN-16-EP(3x3)-40℃~+85℃ 2.4mA 2.5V~5.5V 3.2Wx1@4Ω 77dB 92% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture Class D TQFN-16-EP(3x3) Audio Amplifiers ROHSMaxim Integrated (Analog Devices)Audio AmplifiersXC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)PBY160808T-102Y-N
06031 1kΩ@100MHz 250mΩ 800mA ±25% 0603 Ferrite Beads ROHSChilisin ElectronicsFerrite BeadsGSPK2307P-8R1W
--40℃~+85℃ 1.7kHz 23mm 5% 500mW 6.8mm 88dB 8Ω Electromagnetic - Speakers ROHSINGHAiSpeakersLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorisedMC-107SSY
SMD-25℃~+85℃ 1 10000 times 16P 5A 5V Female Surface Mount, Right Angle Type-C USB 3.1 SMD USB Connectors ROHSHanbo ElectronicUSB ConnectorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
KiCad/README.mdGerbolyze
gerbolyze template production/gerbers --top test.svg
gerbolyze paste production/gerbers test.svg production/gerbers-artParts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | locked | Capacitor_SMD:C_0603_1608Metric | C12, locked, locked, locked, locked, locked, locked, locked, locked, locked, locked, locked, locked |
| 12 | locked | easyeda2kicad:LED-SMD_4P-L1.6-W1.5_XL-1615RGBC-WS2812B | LED1, LED2, LED3, locked, locked, locked, locked, locked, locked, locked, locked, locked |
| 7 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C7, C11, C31, C35, C38 |
| 5 | 100K | Resistor_SMD:R_0603_1608Metric | R2, R4, R5, R6, R9 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C8, C9, C25, C26, C32 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5, C6 |
| 3 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R10, R11 |
| 2 | 220pF | Capacitor_SMD:C_0603_1608Metric | C33, C34 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C10, C27 |
| 2 | 3.3K | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | PBY160808T-102Y-N | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U6, U7 |
| 2 | locked | MountingHole:MountingHole_2mm | locked, locked |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | BOOT | easyeda2kicad:SW-SMD_4P-L4.2-W3.4-P2.15-LS5.2 | SW1 |
| 1 | ESP32-MINI-1-N4 | easyeda2kicad:WIFI-SMD_ESP32-MINI-1-N4 | U1 |
| 1 | G*** | kibuzzard-64FAFBE9 | kibuzzard-64FAFBE9 |
| 1 | G*** | kibuzzard-64FAFBDA | kibuzzard-64FAFBDA |
| 1 | GAIN | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | GSPK2307P-8R1W | easyeda2kicad:SPK-TH_BD23.0-P10.00-D0.8-L-RD | SPK1 |
| 1 | LESD5D5.0CT1G | easyeda2kicad:SOD-523_L1.2-W0.8-LS1.6-BI | D1 |
| 1 | MAX98357AETE+T | easyeda2kicad:TQFN-16_L3.0-W3.0-P0.50-BL-EP1.5 | U2 |
| 1 | MC-107SSY | easyeda2kicad:USB-TYPE-C-SMD_MC-107SSY | locked |
| 1 | PowerLED | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | RED Power | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | RESET | easyeda2kicad:SW-SMD_4P-L4.2-W3.4-P2.15-LS5.2 | SW2 |
| 1 | SAO | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | WS2812B | easyeda2kicad:LED-SMD_4P-L1.6-W1.5_XL-1615RGBC-WS2812B | LED13 |
| 1 | locked | Package_TO_SOT_SMD:SOT-23 | Q1 |
Similar boards
- 2 layers75.1 × 100 mm

- 2 layers75.5 × 50.5 mm

- 4 layers45.3 × 40.1 mm

ESP32-Modular Board
bgb-0/TUe-CBL-Circular-Electronics
A simple and compact bluetooth audio PCB for the TU/e Multidiscplinary CBL track "Circular Electronics"
64 parts2CERN-OHL-P-2.0 - 4 layers40 × 36 mm

Drone v0-00
Haruki-Ayukawa/Full_Scratch_Drone
ESP32搭載基板、プリンタで造形したフレーム、ショップで購入したモータ・プロペラ・LiPoバッテリを用いてフルスクラッチのドローンを製作しました。
55 parts1MIT - 2 layers107.5 × 2.5 mm

ESP32Clock
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
102 parts915 - 4 layers50.8 × 61 mm

- 2 layers159 × 140.1 mm

Phazor
skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
123 parts10 - 2 layers61 × 35 mm

Esp32-1pcb
shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-
Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED
44 parts1
Questions
How big is the Badge PCB?
It measures 103.5 × 90.7 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Badge use?
78 parts, built around the ESP32-MINI-1-N4, MAX98357AETE+T, XC6220B331MR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Badge KiCad files?
From the maxgrim/RedTreat2023Badge repository on GitHub, at the commit this page was made from: the board is KiCad/Badge.kicad_pcb and its schematic KiCad/Badge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask maxgrim before reusing the design.