
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

My project in the shape of a bulb with 10 LEDs that are placed around it!
Blinky is an open-source printed circuit board by mavory, from the mavory/THE-IDEA-Bulb repository on GitHub, published under the MIT licence. It is a 2-layer board of 40.1 × 90.4 mm with 19 parts on 19 nets, routed with 461 tracks and 5 vias.
It is built around the NE555P. Its parts include 10 diodes and 2 ICs.
My project in the shape of a bulb with 10 LEDs that are placed around it!

I wanted to take a break and create a project that wouldn't take so long... So I created this project!
Here are pictures of the schematic and PCB I created in KiCad!


| Reference | Value / Type | Qty | Description |
|---|---|---|---|
| U1 | NE555P | 1 | Timer |
| U2 | 4017 | 1 | Coun |
| D1 - D10 | LEDs | 10 | Standard LED |
| C1 | 1 µF | 1 | Electrolytic Capacitor |
| C2 | 0.01 µF | 1 | Ceramic Capacitor |
| R1 | 470 Ω | 1 | Resistor |
| R2 | 1 kΩ | 1 | Resistor |
| RV1 | 50 kΩ | 1 | Potentiometer (Speed control) |
| J1 | Power | 1 | Power Header (2-pin) |
| J2 | Debug / Signal | 1 | Signal Output Pin |
| PCB | Black | With shipping | 3.50 USD |

Here is a video, it works: https://youtube.com/shorts/iOuM33JNCGg?is=_r2Ftzi8CJoQdTDR
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 1 | 0.01 uF | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C 0.01uF |
| 1 | 1 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C 1uF |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R 1k |
| 1 | 4017 | kokos:N16 | U2 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R 470 |
| 1 | 50k | Potentiometer_THT:Potentiometer_Vishay_T93YA_Vertical | RV1 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | Debug |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Power |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 40.1 × 90.4 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mavory/THE-IDEA-Bulb repository on GitHub, at the commit this page was made from: the board is PCB/Blinky.kicad_pcb and its schematic Circuit diagram/Blinky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).