2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers41.5 × 18.1 mm
RelayController
mattico/RelayControllerWired adaptation of Blitzwolf BW-SS4 Smart Switch
- Size
- 41.5 × 18.1 mm
- Copper layers
- 2
- Thickness
- 0.6 mm
- Parts
- 10
- Nets
- 17
- Pads
- 56
- Tracks, vias
- 128, 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Sep 2020
- Updated
- 11 Nov 2020
Overview
RelayController is an open-source printed circuit board by mattico, from the mattico/RelayController repository on GitHub, published under the MIT licence. It is a 2-layer board of 41.5 × 18.1 mm with 10 parts on 17 nets, routed with 128 tracks and 8 vias.
Its parts include 4 connectors, 2 capacitors, 2 resistors and 2 ICs. It belongs with the STM32 boards of this library.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B02B-XH-AM_1x02_P2.50mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J4 |
| 1 | Conn_01x08 | Connector_PinHeader_2.00mm:PinHeader_1x08_P2.00mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | RelayController:BoardEdgeSolderConnector | J1 |
| 1 | STM32L011D4Px | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | TLP383 | Package_DIP:SMDIP-4_W9.53mm | U2 |
Questions
How big is the RelayController PCB?
It measures 41.5 × 18.1 mm and has 2 copper layers, 0.6 mm thick.
What parts does the RelayController use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RelayController KiCad files?
From the mattico/RelayController repository on GitHub, at the commit this page was made from: the board is RelayController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RelayController design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0