Skip to the content
2 layers95.3 × 61 mmRingphone, the printed circuit board in 3D

Hardware and software to let old analog phones ring and play audio

Size
95.3 × 61 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
62
Pads
157
Tracks, vias
163, 113
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Jun 2019
Updated
19 Apr 2025

Overview

Ringphone is an open-source printed circuit board by matthijskooijman, from the matthijskooijman/Ringphone repository on GitHub. It is a 2-layer board of 95.3 × 61 mm with 47 parts on 62 nets, routed with 163 tracks and 113 vias.

It is built around the L293D and LM358. Its parts include 8 capacitors, 8 resistors, 7 connectors, 2 ICs and 1 diode.

Main components

2

README

PCB/README.md

License

Copyright 2019-2025 Matthijs Kooijman (matthijs@stdin.nl)

This source describes Open Hardware and is licensed under the CERN-OHL-P v2 or any later version.

You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2 (https:/cern.ch/cern-ohl).

This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-P v2 for applicable conditions

See LICENSE.txt for the full license text.

Parts

47
QtyValueFootprintReferences
4GNDTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP1, TP4, TP6, TP12
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5H1, H2, H3, H4
310kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R7
3470RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R5, R6
3DNPCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC6, C7, C8
21kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R8
1100nFCapacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mmC4
110kPotentiometer_THT:Potentiometer_Piher_PC-16_Single_HorizontalRV1
110nFCapacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mmC5
110uF 50VCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
1330nFCapacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mmC2
133μF 50VCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC3
15VTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP10
16P4CConnector_RJ:RJ12_Amphenol_54601-x06_HorizontalJ2
1ATestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP11
1ADCTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP3
1AMPTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP5
1Adafruit_Feather_M0_AdaloggerModule:Adafruit_FeatherA1
1BTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP13
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ6
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ5
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ7
1Conn_02x08_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ4
1DACTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP2
1L293DPackage_DIP:DIP-16_W7.62mmU2
1LM358Package_DIP:DIP-8_W7.62mm_Socket_LongPadsU1
1Logo_Open_Hardware_SmallSymbol:OSHW-Logo2_7.3x6mm_SilkScreenLOGO1
1MOTIONTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP9
1REGULATOR_MODULEFootprints:MT3608REG1
1VDRIVETestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP7
1VGNDTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP8

Similar boards

  • 2 layers70 × 45 mmTemp proj, the printed circuit board in 3D

    Temp proj

    Chaityakul05/TEMPERATURE_BASED_MOTOR_SPEED_CONTROL_PCB

    This project controls the speed of a DC motor based on temperature. An LM35 sensor detects the temperature and compares it with a reference voltage using an LM358 Op-Amp.

    11 parts
  • 2 layers101.6 × 107.9 mmSistdig, the printed circuit board in 3D

    Sistdig

    dinge321/motor_pcb

    This is a pcb for a 6V motor project using an unspecified microcontroler with the driver L293D

    21 parts
  • 2 layers89.5 × 27.3 mmE Latch, the printed circuit board in 3D

    E Latch

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    23 parts
  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers84.3 × 58.4 mmEnocderDriver, the printed circuit board in 3D

    EnocderDriver

    NikodemBartnik/Small-Projects

    All of smaller projects (Arduino, PCBs, electronics, code)

    35 parts55
  • 2 layers56.4 × 72.6 mmRas pi hat, the printed circuit board in 3D

    Ras pi hat

    geno543/Redropi_highway

    the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…

    8 parts13
  • 2 layers87.5 × 70 mmLaberinto, the printed circuit board in 3D

    Laberinto

    CRM-UAM/CRMaze

    Open source robot for maze solving + line following

    34 parts12
  • 2 layers92.5 × 62.5 mmDropGenPCB, the printed circuit board in 3D

    DropGenPCB

    harrislab-brown/DropGen

    DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.

    25 parts12CC-BY-SA-4.0

Questions

How big is the Ringphone PCB?

It measures 95.3 × 61 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ringphone use?

47 parts, built around the L293D and LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ringphone KiCad files?

From the matthijskooijman/Ringphone repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ringphone design in my own project?

Its repository states no licence, so its author keeps all rights: ask matthijskooijman before reusing the design.