

TeamTap Legacy
Atari Jaguar TeamTap schematic
- Size
- 136 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 70
- Pads
- 209
- Tracks, vias
- 487, 96
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 May 2024
- Updated
- 8 Sep 2024
Overview
TeamTap Legacy is an open-source printed circuit board by Matmook, from the Matmook/Atari-Jaguar-TeamTap repository on GitHub. It is a 2-layer board of 136 × 56 mm with 47 parts on 70 nets, routed with 487 tracks and 96 vias.
It is built around the 74HC244D. Its parts include 25 diodes, 7 resistors, 5 connectors, 3 capacitors and 2 ICs. It belongs with the retro computing and games boards of this library.
Main components
1README
README.mdAtari-Jaguar-TeamTap
This is an attempt to recreate the Atari Jaguar TeamTap schematic.

There is a catch on the original PCB:
- the 5v from the Jaguar powers TeamTap's internal logic (74HC154 and 74HC244).
- pad's pin 7 is supposed to be used to power the pad's logic (74HC244).
- but all pads pin 7 are left floating in the TeamTam.. I guess that's some Atari magic => the pad's 74HC244 is fed by the other IOs, not VCC. There is a "Magic" shunt on my pcb to test the pads behaviour when fed with 5v (as it should).
Matthieu Barreteau (Matmook) 2024
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | D | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 6 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_5mm_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 4.7µF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 74154 | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U1 |
| 1 | 74HC244 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | Conn_01x13 | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | PUG1 |
| 1 | Magic | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | SCK A | Connector_Dsub:DSUB-15-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J4 |
| 1 | SCK B | Connector_Dsub:DSUB-15-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J3 |
| 1 | SCK C | Connector_Dsub:DSUB-15-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J2 |
| 1 | SCK D | Connector_Dsub:DSUB-15-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J1 |
Similar boards
- 4 layers137 × 86 mm

- 4 layers184.2 × 169.5 mm

- 4 layers101 × 47 mm

- 2 layers120 × 66 mm

Io daughterboard
kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.
136 parts28GPL-3.0 - 2 layers99.1 × 99.1 mm

6809v2
jbevren/6809v2
Code and design repository for the 6809v2 SBC: To be released at VCFMW 13
60 parts22 - 4 layers100 × 100 mm

- 2 layers100 × 100 mm

- 6 layers285 × 236 mm

Ra9704
Coin-OpCollection/Development-Documentation
This repository contains technical information, documentation, and reverse-engineering details for the base platform systems of FPGA implementations released by Coin-Op Collection.
228 parts11
Questions
How big is the TeamTap Legacy PCB?
It measures 136 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TeamTap Legacy use?
47 parts, built around the 74HC244D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TeamTap Legacy KiCad files?
From the Matmook/Atari-Jaguar-TeamTap repository on GitHub, at the commit this page was made from: the board is Kicad/TeamTap_Legacy.kicad_pcb and its schematic Kicad/TeamTap_Legacy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TeamTap Legacy design in my own project?
Its repository states no licence, so its author keeps all rights: ask Matmook before reusing the design.