Skip to the content
2 layers55 × 96 mmOrnament, the printed circuit board in 3D

Miscellaneous Hacks

Size
55 × 96 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
25
Pads
82
Tracks, vias
166, 17
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Oct 2019
Updated
22 Oct 2026

Overview

Ornament is an open-source printed circuit board by Matir, from the Matir/hacks repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 55 × 96 mm with 30 parts on 25 nets, routed with 166 tracks and 17 vias.

It is built around the ATTINY84-20SSU and CR2032. Its parts include 8 resistors, 6 capacitors, 6 diodes, 3 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

30
QtyValueFootprintReferences
6200Resistor_SMD:R_0603_1608MetricR2, R3, R4, R5, R6, R7
6LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4, D5, D6
310uCapacitor_SMD:C_0805_2012MetricC2, C3, C4
20.1uCapacitor_SMD:C_0603_1608MetricC1, C6
210kResistor_SMD:R_0603_1608MetricR1, R8
110nCapacitor_SMD:C_0603_1608MetricC5
12.2uHInductor_SMD:L_1008_2520MetricL1
1AT42QT1010-TSHRPackage_TO_SOT_SMD:SOT-23-6U3
1ATtiny84-20SSUPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
1CR2032Battery:BatteryHolder_Keystone_3002_1x2032BT1
1Jumper_NO_SmallJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1
1LOGOornament:snowmanG***
1PROGMatir:AVR_ISPJ1
1TPS61099XMatir:DRV_WSON6U2
1TouchMatir:TOUCH_SINGLETP1

The 29 most common of 30 parts.

More from Matir/hacks

8
  • 2 layers196.7 × 31.5 mmClock, the printed circuit board in 3D

    Clock

    Matir/hacks

    Miscellaneous Hacks

    90 parts18BSD-2-Clause
  • 2 layers80 × 80 mmLedpanel, the printed circuit board in 3D

    Ledpanel

    Matir/hacks

    Miscellaneous Hacks

    40 parts18BSD-2-Clause
  • 2 layers44.3 × 48.8 mmPowerlog, the printed circuit board in 3D

    Powerlog

    Matir/hacks

    Miscellaneous Hacks

    40 parts18BSD-2-Clause
  • 2 layers46 × 42 mmEspctl, the printed circuit board in 3D

    Espctl

    Matir/hacks

    Miscellaneous Hacks

    33 parts18BSD-2-Clause
  • 2 layers51.5 × 44 mmEspled, the printed circuit board in 3D

    Espled

    Matir/hacks

    Miscellaneous Hacks

    32 parts18BSD-2-Clause
  • 2 layers23.5 × 56.5 mmTerm4pi, the printed circuit board in 3D

    Term4pi

    Matir/hacks

    Miscellaneous Hacks

    22 parts18BSD-2-Clause
  • 2 layers19.5 × 17.5 mmPipwr screws, the printed circuit board in 3D

    Pipwr screws

    Matir/hacks

    Miscellaneous Hacks

    3 parts18BSD-2-Clause
  • 2 layers32.2 × 28.2 mmTigard la breakout, the printed circuit board in 3D

    Tigard la breakout

    Matir/hacks

    Miscellaneous Hacks

    3 parts18BSD-2-Clause

Similar boards

  • 2 layers72.1 × 78.5 mmPcb9segCounter, the printed circuit board in 3D

    Pcb9segCounter

    martinbros/9SegCounter

    SAO 9 Segment 2 Digit Counter

    57 parts8GPL-3.0
  • 2 layers57.6 × 17.5 mmITPMS, the printed circuit board in 3D

    ITPMS

    LeicesterEnjoyer/ITPMS

    Enhanced TPMS with integrated tire wear assistant

    15 parts1MIT
  • 2 layers79 × 49.9 mmIO NRF, the printed circuit board in 3D

    IO NRF

    crlab3/OBD_IONRF_ESP32

    Latest version of IONRF & ESP32 OBD platform.

    39 parts
  • 2 layers40 × 28.6 mmLever, the printed circuit board in 3D

    Lever

    Karpova-Lab/lever

    Retractable lever for rat behavior experiments

    12 parts
  • 2 layers50 × 50 mmTPSE Glass, the printed circuit board in 3D

    TPSE Glass

    lukilukeskywalker/Binary_Clock

    Binary Clock designed to run on an attiny84, and to be in a one sided pcb

    49 parts
  • 2 layers59.7 × 79 mmEsion-4aa, the printed circuit board in 3D

    Esion-4aa

    RVelichko/Esion

    C++

    41 parts
  • 2 layers42 × 18 mmDesign files Attiny84 V0, the printed circuit board in 3D

    Design files Attiny84 V0

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    65 parts33
  • 2 layers62 × 42 mmTiny, the printed circuit board in 3D

    Tiny

    hmatuschek/ardf-tx

    Schematics and firmware for simple ARDF transmitter.

    29 parts5

Questions

How big is the Ornament PCB?

It measures 55 × 96 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ornament use?

30 parts, built around the ATTINY84-20SSU and CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ornament KiCad files?

From the Matir/hacks repository on GitHub, at the commit this page was made from: the board is pcbs/ornament2020/ornament/ornament.kicad_pcb and its schematic electronics/wiretest/wiretest/wiretest.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ornament design in my own project?

Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).