2 layers50 × 50 mm
TPSE Glass
lukilukeskywalker/Binary_Clock
Binary Clock designed to run on an attiny84, and to be in a one sided pcb
46 parts
2 layers50 × 50 mm
TPSE Glass
lukilukeskywalker/Binary_ClockBinary Clock designed to run on an attiny84, and to be in a one sided pcb
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 37
- Pads
- 135
- Tracks, vias
- 232, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Dec 2022
- Updated
- 28 Nov 2023
Overview
TPSE Glass is an open-source printed circuit board by lukilukeskywalker, from the lukilukeskywalker/Binary_Clock repository on GitHub. It is a 2-layer board of 50 × 50 mm with 49 parts on 37 nets, routed with 232 tracks and 0 vias.
It is built around the ATTINY84-20SSU, DS3231MZ/V+ and PCF8563T/5, with the SD103AWS among its other parts. Its parts include 23 diodes, 12 resistors, 4 ICs, 2 switches and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATTINY84-20SSU
SOIC-14-40℃~+85℃ 10bit 12 2.7V~5.5V 20MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DS3231MZ/V+
SOIC-8-40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function、Locking and tamper-proof、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksPCF8563T/5
SO-8-40℃~+85℃ 0.25uA 1V~5.5V Battery low-voltage detection、Programmable clock output、Alarm function、Countdown timer I2C Yes SO-8 Real Time Clocks ROHSNXP SemiconductorsReal Time Clocks
SD103AWS
SOD-3231 Independent 2A 350mA 40V 5uA@30V 600mV@200mA SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | LED | Librerias:LED_1206_3216Metric-ThroughPCB | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 5 | 330 | Resistor_SMD:R_1206_3216Metric | R4, R5, R6, R7, R8 |
| 2 | 3.6v_Zener | Diode_SMD:D_SMA | D22, D23 |
| 2 | 4,7k | Resistor_SMD:R_1206_3216Metric | R10, R11 |
| 2 | 68 | Resistor_SMD:R_1206_3216Metric | R9, R12 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 1k5 | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | ATtiny84-20SSU | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Battery_Cell | Librerias:TE_796136-1 | BT1 |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | MISO | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | MOSI | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | NT3H2x11 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U2 |
| 1 | PCF8563T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | R | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | RESET | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | SCK | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | SD103AWS | Diode_SMD:D_SMA | D24 |
| 1 | SET | Librerias:SW_PTS526_SM08_SMTR2_LFS | SW1 |
| 1 | SW_Push | Librerias:SW_PTS526_SM08_SMTR2_LFS | SW2 |
| 1 | USB_B_Micro | Librerias:TE_1981568-1 | J1 |
| 1 | VCC | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
More from lukilukeskywalker/Binary_Clock
4- 2 layers50 × 50 mm
TPSE Glass
lukilukeskywalker/Binary_Clock
Binary Clock designed to run on an attiny84, and to be in a one sided pcb
40 parts - 2 layers50 × 50 mm
Binary Clock
lukilukeskywalker/Binary_Clock
Binary Clock designed to run on an attiny84, and to be in a one sided pcb
31 parts - 2 layers50 × 50 mm
Binary Clock
lukilukeskywalker/Binary_Clock
Binary Clock designed to run on an attiny84, and to be in a one sided pcb
21 parts
Similar boards
- 2 layers70.6 × 84.3 mm
- 2 layers72.1 × 78.5 mm
- 2 layers57.6 × 17.5 mm
- 2 layers79 × 49.9 mm
- 2 layers40 × 28.6 mm
- 2 layers59.7 × 79 mm
- 2 layers42 × 18 mm
Design files Attiny84 V0
aspro648/KiCad
My design files. Abandon all hope ye who enter here.
65 parts33 - 2 layers55 × 96 mm
Questions
How big is the TPSE Glass PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TPSE Glass use?
49 parts, built around the ATTINY84-20SSU, DS3231MZ/V+, PCF8563T/5 and SD103AWS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TPSE Glass KiCad files?
From the lukilukeskywalker/Binary_Clock repository on GitHub, at the commit this page was made from: the board is TPSE Glass_rev3 Card/TPSE Glass.kicad_pcb and its schematic TPSE Glass_rev1/TPSE Glass.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TPSE Glass design in my own project?
Its repository states no licence, so its author keeps all rights: ask lukilukeskywalker before reusing the design.