
Rebot ctrl
Matheus3007/pcb-lab
PCBs designed entirely as code: Python circuits + KiCad 10 + Freerouting, checked, rendered and ordered assembled from JLCPCB

PCBs designed entirely as code: Python circuits + KiCad 10 + Freerouting, checked, rendered and ordered assembled from JLCPCB
Rebot ctrl v2 is an open-source printed circuit board by Matheus3007, from the Matheus3007/pcb-lab repository on GitHub, published under the MIT licence. It is a 4-layer board of 25 × 25 mm with 57 parts on 43 nets, routed with 491 tracks and 96 vias.
It is built around the STM32G431KBU6, GD25Q128EWIGY and LMR36506RRPER, with the LSM6DSV32X, XC6206P332MR-G and B5819WS among its other parts. Its parts include 20 capacitors, 19 resistors, 5 ICs, 3 diodes and 3 connectors. It belongs with the STM32 boards of this library.
PCBs designed entirely as code (atopile + KiCad 10 + Python), checked automatically, reviewed through renders, and ordered assembled from JLCPCB.
CLAUDE.md.boards/<name>/build/review/ at each gate (docs/review-gates.md).docs/pipeline.md.| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C10, C11, C15, C16, C17, C18, C19, C20, C21 |
| 6 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R2, R9, R10, R11, R12 |
| 6 | pad | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R14, R16, R18, R19 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C7, C8, C14 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R5, R13, R15 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C6, C9, C13 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R17 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | B5819WS 40V 1A | Diode_SMD:D_SOD-323 | D1, D2 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 22uH 3015 | Inductor_SMD:L_Changjiang_FNR3015S | L1 |
| 1 | GD25Q128E 16MB | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U5 |
| 1 | JST-GH 4P (receiver) | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J2 |
| 1 | JST-SH 8P (ESC) | Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J1 |
| 1 | LMR36506 buck | Rebot:VQFN-HR-9_2x2mm_TI_RPE0009A | U2 |
| 1 | LSM6DSV32X | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U4 |
| 1 | STM32G431KBU6 | Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U1 |
| 1 | USB-C 16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | XC6206 3.3V | Package_TO_SOT_SMD:SOT-23-3 | U3 |
| 1 | red | LED_SMD:LED_0603_1608Metric | D3 |

Matheus3007/pcb-lab
PCBs designed entirely as code: Python circuits + KiCad 10 + Freerouting, checked, rendered and ordered assembled from JLCPCB


sbbxiii/The-Eagle
The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB

RockSat-X/RSXVT2026
Our experiment aims to evaluate the use of optical navigation with Commercial-off-the-Shelf (COTS) products for use in spaceflight applications.

PTR-projects/PTR_mini_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.

godmar/imuboard-claude
A minimal breakout for the ST LSM6DSV32X 6-axis IMU (±32 g accel, ±4000 dps gyro). The circuit follows the mode 1 connection diagram in ST's datasheet (DS13511, Figure 28, section 7.1).

PTR-projects/PTR_micro_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

opentac/opentac
OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.
It measures 25 × 25 mm and has 4 copper layers, 1 mm thick.
57 parts, built around the STM32G431KBU6, GD25Q128EWIGY, LMR36506RRPER and LSM6DSV32X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Matheus3007/pcb-lab repository on GitHub, at the commit this page was made from: the board is boards/rebot-ctrl-v2/build/fab/rebot-ctrl-v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).