Skip to the content
2 layersLatarka, the printed circuit board in 3D

Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water.

Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
7
Pads
24
Tracks, vias
53, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Feb 2024
Updated
14 Nov 2025

Overview

Latarka is an open-source printed circuit board by Mateuszworo97, from the Mateuszworo97/Projects repository on GitHub. It is a 2-layer board with 9 parts on 7 nets, routed with 53 tracks and 0 vias.

Its parts include 2 capacitors, 2 resistors, 2 connectors, 1 IC and 1 diode.

README

README.rst

About

.. raw:: html

Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water. The system's task is also to display current data regarding time, temperature and light intensity on the display. The system will enable the pump to be turned on at a specific time for a specific period of time.

In the future, this project will be extended with new functionalities. Currently, I am working on two versions of the system that will reduce the size of the PCB and the number of components used.

  • Version 1: Uses the same components as the current version but in a smaller layout.
  • Version 2: Introduces new components to reduce PCB size while keeping the system expandable.
  • Version 3: Adds wireless data transmission using LORAWAN technology and integration with cloud platforms such as ThingsBoard or TTN (The Things Network).

One version will use the same components as the current one, but will be smaller in size. The second version will allow include new components that will reduce the size of the PCB board, but won't limit possibility of expended the system in the future. The PCB board will contains derivations for additional components that can be added later. The third version will expand the funtionality of the system with wireless data transmission using LORAWAN technology. Target of the system is to send data to cloud platform such as THINGSBOARD or TTN (The Things Network). Definitely, such action will investigate natural environment around device and bees activity. Currently, the first of version system has contributed to better understanding of bees behavior in hard to reach places with limited access to fresh water. I think that the third version of the system will be a great tool for beekeepers to monitor the environment around the beehive and bees activity. Above all, the system will allow to achieve the significant level of automation and considerably contributed to increase the capacity and coverage of the lorawan Network.

Operation

The system measures time, temperature, humidity, light intensity, battery voltage, value and direction of battery current flow, power consumered and delivered to battery, Voltage of photovoltaic panel, value of photovoltaic panel. The data is shown on the display. By default, the pump is turned on for 1 minute. Every hour. Using push buttons, we can increase the pump activation time from 1 to 59 minutes. Using the buttons, we can also change the time at which the alarm will turn on (pump on). The next time the alarm will turn on will be increased by the hour value displayed on the display. we can delay the pump activation value from 1 to 16 hours.

Development

  1. Simplification
  2. Adding an automatic and manual control system
  3. Enriching the project with wireless data transmission using LORAWAN technology
  4. Desiging a much smaller PCB
  5. Creating own MPPT board

Block Diagram

.. image:: https://github.com/Mateuszworo97/Projects/blob/experiment/Embedded_projects/docs/images/blockDiagram.png :alt: Block Diagram :align: center

Visualization

.. image:: https://github.com/Mateuszworo97/Projects/blob/experiment/Embedded_projects/docs/images/3D_visualization.PNG :alt: Visualization :align: center

.. image:: https://github.com/Mateuszworo97/Projects/blob/experiment/Embedded_projects/docs/images/routedPCBtracks.PNG :alt: Routed PCB tracks :align: center

Components

Contains a list of components used to build the system

Refer to docs/components.rst.

Hardware

Contains documentation of the sensors and components used. -Diagram of the electronic system of the device.

Refer to docs/hardware.

Software

-Diagram of the software nic system of the device. Refer to docs/software.

License

Parts

9
QtyValueFootprintReferences
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J1Bateria1
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
14Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
14,7uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
14,7ucewka2:cewka_m2L1
1LED_SmallLED_THT:LED_D8.0mmD1
1MCP1643xMSPackage_SO:MSOP-8_3x3mm_P0.65mmU1

More from Mateuszworo97/Projects

3
  • 2 layers217.3 × 127.3 mmPCB ApiaryWaterDispensingSystem, the printed circuit board in 3D

    PCB ApiaryWaterDispensingSystem

    Mateuszworo97/Projects

    Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water.

    255 parts
  • 2 layers69.6 × 53.3 mmShield Arduino, the printed circuit board in 3D

    Shield Arduino

    Mateuszworo97/Projects

    Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water.

    48 parts
  • 2 layers70 × 82.5 mmApiaryWaterDispensingSystem, the printed circuit board in 3D

    ApiaryWaterDispensingSystem

    Mateuszworo97/Projects

    Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water.

    41 parts

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

What parts does the Latarka use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Latarka KiCad files?

From the Mateuszworo97/Projects repository on GitHub, at the commit this page was made from: the board is PCB projects/latarka/latarka.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Latarka design in my own project?

Its repository states no licence, so its author keeps all rights: ask Mateuszworo97 before reusing the design.