Mateuszworo97/ProjectsApiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water.
ApiaryWaterDispensingSystem is an open-source printed circuit board by Mateuszworo97, from the Mateuszworo97/Projects repository on GitHub. It is a 2-layer board of 70 × 82.5 mm with 41 parts on 100 nets, routed with 369 tracks and 166 vias.
It is built around the BME280. Its parts include 15 connectors, 12 capacitors, 10 resistors and 4 switches.
.. raw:: html
Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water. The system's task is also to display current data regarding time, temperature and light intensity on the display. The system will enable the pump to be turned on at a specific time for a specific period of time.
In the future, this project will be extended with new functionalities. Currently, I am working on two versions of the system that will reduce the size of the PCB and the number of components used.
One version will use the same components as the current one, but will be smaller in size. The second version will allow include new components that will reduce the size of the PCB board, but won't limit possibility of expended the system in the future. The PCB board will contains derivations for additional components that can be added later. The third version will expand the funtionality of the system with wireless data transmission using LORAWAN technology. Target of the system is to send data to cloud platform such as THINGSBOARD or TTN (The Things Network). Definitely, such action will investigate natural environment around device and bees activity. Currently, the first of version system has contributed to better understanding of bees behavior in hard to reach places with limited access to fresh water. I think that the third version of the system will be a great tool for beekeepers to monitor the environment around the beehive and bees activity. Above all, the system will allow to achieve the significant level of automation and considerably contributed to increase the capacity and coverage of the lorawan Network.
The system measures time, temperature, humidity, light intensity, battery voltage, value and direction of battery current flow, power consumered and delivered to battery, Voltage of photovoltaic panel, value of photovoltaic panel. The data is shown on the display. By default, the pump is turned on for 1 minute. Every hour. Using push buttons, we can increase the pump activation time from 1 to 59 minutes. Using the buttons, we can also change the time at which the alarm will turn on (pump on). The next time the alarm will turn on will be increased by the hour value displayed on the display. we can delay the pump activation value from 1 to 16 hours.
.. image:: https://github.com/Mateuszworo97/Projects/blob/experiment/Embedded_projects/docs/images/blockDiagram.png :alt: Block Diagram :align: center
.. image:: https://github.com/Mateuszworo97/Projects/blob/experiment/Embedded_projects/docs/images/3D_visualization.PNG :alt: Visualization :align: center
.. image:: https://github.com/Mateuszworo97/Projects/blob/experiment/Embedded_projects/docs/images/routedPCBtracks.PNG :alt: Routed PCB tracks :align: center
Contains a list of components used to build the system
Refer to docs/components.rst.
Contains documentation of the sensors and components used. -Diagram of the electronic system of the device.
Refer to docs/hardware.
-Diagram of the software nic system of the device.
Refer to docs/software.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R6, R8, R10 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R5, R7, R9 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1, SW2, SW3, SW4 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 2 | Conn_02x19_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J7, J10 |
| 1 | 3V3 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J16 |
| 1 | BH1750 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | BME280 | ApiaryWaterDispensingSystem:PinSocket_1x06_P2.54mm_Vertical_BME280 | J1 |
| 1 | BOOST | Connector_PinSocket_2.00mm:PinSocket_1x03_P2.00mm_Vertical | J13 |
| 1 | Conn_01x14_Male | ApiaryWaterDispensingSystem:PinSocket_1x07_P2.54mm_Vertical_DRV8835 | J9 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J8 |
| 1 | INA219 Battery | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | INA219 PV | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | POWER_5V | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J14 |
| 1 | PUMP | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J12 |
| 1 | RTC | ApiaryWaterDispensingSystem:PinSocket_1x04_P2.54mm_Vertical_RTCDS3231 | J4 |
| 1 | SD CARD | ApiaryWaterDispensingSystem:PinSocket_1x08_P2.54mm_Vertical_SD_CARD | J15 |
Mateuszworo97/Projects
Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water.
Mateuszworo97/Projects
Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water.
Mateuszworo97/Projects
Apiary Water Dispensing System — This is a device design whose purpose is to automatically supply bee water from an underground tank. In hard-to-reach places and with limited access to fresh water.
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
It measures 70 × 82.5 mm and has 2 copper layers, 1.6 mm thick.
41 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Mateuszworo97/Projects repository on GitHub, at the commit this page was made from: the board is Embedded_projects/PCB/ApiaryWaterDispensingSystem/ApiaryWaterDispensingSystem.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Mateuszworo97 before reusing the design.
