
Usb hub 3s v2
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

Voltage Controlled Oscillator (Square and Triangle Generator)
VCO is an open-source printed circuit board by MateoHadzimustafic, from the MateoHadzimustafic/VCO repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 53.9 × 64.8 mm with 82 parts on 65 nets, routed with 446 tracks and 67 vias.
It is built around the TL072CDT, MT3608 and TPS63700DRCR, with the RH-5015, CDRH5D18NP-100NC and RK09K1130AAU among its other parts. Its parts include 27 resistors, 24 ICs, 19 capacitors, 5 diodes and 3 connectors.
Designed and built a Voltage-Controlled Oscillator (VCO) capable of generating square and triangle waveforms with adjustable frequency and amplitude using op-amp-based analog circuitry. Integrated USB power management and LiPo battery input for portable or wired operation, including onboard LiPo charging functionality for convenient rechargeable power support.
Completed — Fully designed, built, tested, and validated.
docs/ — design notes, calculations, and planninghardware/ — schematic, PCB layout, and manufacturing filesbom/ — bill of materials and component notesimages/ — renders, diagrams, and photos| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | RH-5015 | VCO:SMD_RH-5015 | U8, U9, U10, U11, U12, U13, U16, U17, U18, U20, U21, U23 |
| 5 | 100kΩ | PCM_JLCPCB:R_0805 | R4, R7, R14, R15, R22 |
| 5 | 10uF | PCM_JLCPCB:C_0805 | C5, C7, C10, C19, C20 |
| 5 | 1kΩ | PCM_JLCPCB:R_0805 | R2, R18, R20, R25, R26 |
| 5 | 4.7uF | PCM_JLCPCB:C_0805 | C12, C15, C16, C17, C18 |
| 4 | 1MΩ | PCM_JLCPCB:R_0805 | R3, R16, R19, R23 |
| 3 | 100nF | PCM_JLCPCB:C_0805 | C1, C4, C6 |
| 3 | 5.1kΩ | PCM_JLCPCB:R_0805 | R5, R11, R13 |
| 3 | TL072CDT | PCM_JLCPCB:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U1, U2, U5 |
| 2 | 510Ω | PCM_JLCPCB:R_0805 | R1, R6 |
| 2 | CDRH5D18NP-100NC | VCO:IND-SMD_L5.7-W5.7_CDRH5D18NP | U19, U24 |
| 2 | Conn_01x01 | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J1, J3 |
| 2 | RK09K1130AAU | VCO:RES-TH_RK09K1130AAU | U3, U6 |
| 2 | SS12D07VG6_087 | VCO:SW-TH_SS12D07VG4 | SW1, SW2 |
| 1 | 1.2MΩ | PCM_JLCPCB:R_1206 | R21 |
| 1 | 1.2kΩ | PCM_JLCPCB:R_0805 | R12 |
| 1 | 100nF | PCM_JLCPCB:C_0402 | C11 |
| 1 | 10pF | PCM_JLCPCB:C_0603 | C14 |
| 1 | 10Ω | PCM_JLCPCB:R_0603 | R8 |
| 1 | 120kΩ | PCM_JLCPCB:R_0805 | R10 |
| 1 | 220nF | PCM_JLCPCB:C_0805 | C13 |
| 1 | 22uF | PCM_JLCPCB:C_0805 | C9 |
| 1 | 22uF | PCM_JLCPCB:C_1206 | C3 |
| 1 | 24kΩ | PCM_JLCPCB:R_0805 | R27 |
| 1 | 2N3904S | VCO:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-TR | U7 |
| 1 | 3kΩ | PCM_JLCPCB:R_0805 | R9 |
| 1 | 47uF | PCM_JLCPCB:C_1206 | C8 |
| 1 | 51kΩ | PCM_JLCPCB:R_0805 | R17 |
| 1 | AO3401A | PCM_JLCPCB:Q_SOT-23 | Q1 |
| 1 | B5819W | PCM_JLCPCB:D_SOD-123 | D5 |
| 1 | Connector, USB-TYPE-C-16P | PCM_JLCPCB:TYPE-C-SMD_HX-TYPE-C-16PIN | J2 |
| 1 | Green | PCM_JLCPCB:D_0805 | D4 |
| 1 | KH-PH-2P-Z | VCO:CONN-TH_2P-P2.00_KINGHELM_KH-PH-2P-Z | U25 |
| 1 | M7 | PCM_JLCPCB:D_SMA | D1 |
| 1 | MT3608 | VCO:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U14 |
| 1 | RL1206FR-070R4L | VCO:R1206 | R24 |
| 1 | Red | PCM_JLCPCB:D_0805 | D2 |
| 1 | SL03-GS08 | VCO:SMF_L2.8-W1.8-LS3.7-RD | ZD1 |
| 1 | SS14 | PCM_JLCPCB:D_SMA | D3 |
| 1 | TP4056 | PCM_JLCPCB:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U4 |
| 1 | TPS63700DRCR | VCO:VREG_V62_16624-01YE | U15 |

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

aselectroworks/Analog_Delay
Multiple function BBD Analog Delay assisted by Digital Domain.



Benjamin-girard-1/geophys_acquisition_module
Modular ESP32-S3 geophysical data-acquisition system with custom hardware, multi-channel ADC, GNSS, IMU, removable analog sensor cards, firmware, and host tools



cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
It measures 53.9 × 64.8 mm and has 2 copper layers, 1.6 mm thick.
82 parts, built around the TL072CDT, MT3608, TPS63700DRCR and RH-5015. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MateoHadzimustafic/VCO repository on GitHub, at the commit this page was made from: the board is hardware/VCO.kicad_pcb and its schematic hardware/VCO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).