Skip to the content
12

SL03-GS08

Vishay IntertechnologyExtended

1 Independent 1.1A 130uA@30V 30V 40A 430mV@1.1A DO-219AB(SMF) Schottky Diodes ROHS

Part id
vishay/SL03-GS08
Category
Schottky Diodes
Package
DO-219AB(SMF)
Pins
2
In stock
7,014 at JLCPCB (C490381)
Used on
3 open-source boards

Overview

The SL03-GS08 is a schottky Diode made by Vishay Intertechnology in a DO-219AB(SMF) package with 2 pins. 1 Independent 1.1A 130uA@30V 30V 40A 430mV@1.1A DO-219AB(SMF) Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SMF, from KiCad's library), ready for a KiCad board. 7,014 are in stock at JLCPCB (part C490381). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_SMFFrom KiCad's library

From the datasheet

6
Reverse voltage, most
30 V · Maximum repetitive peak reverse voltage · p. 1
Forward current, most
1.1 A · Maximum average forward rectified current at TL = 109 °C · p. 1
Forward voltage
395 mV · Typical instantaneous forward voltage at IF = 0.5 A, pulse test · p. 2
Forward voltage
450 mV · Typical instantaneous forward voltage at IF = 1.1 A · p. 2
Junction, hottest
125 °C · Maximum operating junction temperature · p. 1
Junction to air (SMF (DO-219AB))
180 K/W · Junction to ambient air, epoxy substrate with 3 mm x 3 mm Cu pads · p. 1

What it is and has

4
Package
SMF (DO-219AB) · p. 1
Circuit configuration
single · p. 1
Qualification
AEC-Q101 qualified · p. 1
Junction
Oxide planar chip junction · p. 1

Specifications

13
ParameterConditionsAs printedPage
Maximum repetitive peak reverse voltage VRRMSL03; Tamb = 25 °Cmax 30 V1
Maximum RMS voltage VRMSSL03; Tamb = 25 °Cmax 21 V1
Maximum DC blocking voltage VDCSL03; Tamb = 25 °Cmax 30 V1
Maximum average forward rectified current IF(AV)TL = 109 °Cmax 1.1 A1
Peak forward surge current 8.3 ms single half sine-wave IFSMTamb = 25 °Cmax 40 A1
Thermal resistance junction to ambient air (1) RthJATamb = 25 °C; mounted on epoxy substrate with 3 mm x 3 mm Cu pads (≥ 40 um thick)typ 180 K/W1
Maximum operating junction temperature Tjmax 125 °C1
Storage temperature range Tstgmin -55 · max 150 °C1
Instantaneous forward voltage VFSL03; Tamb = 25 °C; IF = 0.5 A; pulse test: 300 us pulse width, 1 % duty cycletyp 0.395 · max 0.43 V2
Typical instantaneous forward voltage VFSL03; Tamb = 25 °C; IF = 1.1 Atyp 0.45 V2
Maximum DC reverse current at rated DC blocking voltage IRSL03; TA = 25 °C; rated DC blocking voltagemax 130 uA2
Maximum DC reverse current at rated DC blocking voltage IRSL03; TA = 100 °C; rated DC blocking voltagemax 6 mA2
Reverse recovery time trrSL03; Tamb = 25 °C; maximum specified as < 10 nsmax 10 ns2

Ordering codes, by the datasheet

2
SL03-GS18
SMF (DO-219AB) · S3 marking; tape and reel; 10K per 13-inch reel (8 mm tape), MOQ = 50K · p. 1
SL03-GS08
SMF (DO-219AB) · S3 marking; tape and reel; 3K per 7-inch reel (8 mm tape), MOQ = 30K · p. 1

Open-source boards using it

3
  • 2 layers52 × 56.6 mmMuMo v2-Node, the printed circuit board in 3D

    MuMo v2-Node

    Strooom/MuMo-V2-Node-PCB

    PCB design for the Museum Monitor V2

    79 parts17
  • 6 layers200 × 170 mmMicrowave Beamer, the printed circuit board in 3D

    Microwave Beamer

    levisawatz/Microwave_beam_kicad

    474 parts
  • 2 layers53.9 × 64.8 mmVCO, the printed circuit board in 3D

    VCO

    MateoHadzimustafic/VCO

    Voltage Controlled Oscillator (Square and Triangle Generator)

    82 partsApache-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SL03-GS08?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SMF, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SL03-GS08?

DO-219AB(SMF), with 2 pins. Its footprint is drawn on this page.

Where is the SL03-GS08 datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the SL03-GS08?

JLCPCB lists it as part C490381, with 7,014 in stock; the sellers' links on this page open their listings.

What can replace the SL03-GS08?

Parts like it in the library: the SL04-E3-08 by Vishay Intertechnology, the V2FM15HM3/H by Vishay Intertechnology, the SS2FH10HM3/H by Vishay Intertechnology and the V3FL45HM3/H by Vishay Intertechnology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SL03-GS08?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.