2 layers100 × 100 mm FV CTRL RevA, the printed circuit board in 3D

FV CTRL RevA

Nguồn trong thư mục này được giữ để tra cứu và bảo toàn công việc cũ. Không dùng thay cho RevB. Một số file có sửa đổi cục bộ chưa commit từ trước đợt sắp xếp; các thay đổi đó được giữ nguyên nội dung, chưa được kiểm…

Open in PCBKit

Size: 100 × 100 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 84
Nets: 48
Pads: 258
Tracks, vias: 423, 59
Pours: 2
Routed: Yes
KiCad: KiCad 10.0 (file 20260206)
Created: 15 Oct 2026
Updated: 28 Oct 2026

Overview

FV CTRL RevA is an open-source printed circuit board by Masterltb, from the Masterltb/pcb repository on GitHub. It is a 2-layer board of 100 × 100 mm with 84 parts on 48 nets, routed with 423 tracks and 59 vias.

It is built around the ESP32-WROOM-32, AMS1117-3.3 and 1.5KE15CA, with the IRF9540NS and S8050 among its other parts. Its parts include 23 resistors, 20 connectors, 14 capacitors, 6 diodes and 3 fuses. It belongs with the ESP32 boards of this library.

Main components

README

hardware/archive/reva/README.md

RevA lịch sử

Project hiện hành: ../../revb/FV-CTRL_RevB.kicad_pro. Đọc README ở gốc repository trước khi chọn file chế tạo.

Parts

Qty	Value	Footprint	References
7	10k	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R5, R6, R7, R8, R9, R10, R11
5	100nF	C_Disc_D5.0mm_W2.5mm_P5.00mm	C3, C4, C6, C13, C14
4	100nF (DNP)	C_Disc_D5.0mm_W2.5mm_P5.00mm	C7, C8, C9, C10
4	10k (DNP)	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R16, R17, R18, R19
4	330R	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R1, R2, R3, R4
4	MountingHole_3.2mm_M3	MountingHole_3.2mm_M3	H1, H2, H3, H4
2	1000-2200uF 16V	CP_Radial_D12.5mm_P5.00mm	C1, C2
2	120R	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R14, R15
2	2.2k	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R21, R22
2	PTC 3A	Fuse_Bourns_MF-RG300	F2, F3
2	TP_GND	TestPoint_Pad_D2.0mm	TP6, TP7
1	1.0k	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R24
1	1.5KE15CA	D_DO-201_P12.70mm_Horizontal	D1
1	1.5k	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R23
1	10uF 16V	CP_Radial_D5.0mm_P2.00mm	C11
1	10uF 16V	C_Disc_D5.0mm_W2.5mm_P5.00mm	C5
1	12V_IN	TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal	J1
1	1k	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R13
1	22uF 16V	CP_Radial_D5.0mm_P2.00mm	C12
1	5.6k	R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R20
1	5A 250V	Fuseholder_Clip-5x20mm_Littelfuse_111_Inline_P20.00x5.00mm_D1.05mm_Horizontal	F1
1	AMS1117-3.3	SOT-223-3_TabPin2	U3
1	AUX_BUCK (DNP)	PinHeader_1x04_P2.54mm_Vertical	J3
1	ESP32-WROOM-32	ESP32-WROOM-32_HandSolder	U2
1	I2C_RESERVED	PinHeader_1x04_P2.54mm_Vertical	J17
1	IRF9540N	TO-220-3_Vertical	Q1
1	IR_RX1	JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical	J9
1	IR_RX2	JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical	J10
1	IR_TX1 (Col 1)	JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical	J11
1	IR_TX2 (Col 2)	JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical	J12
1	LED_+12V	LED_D3.0mm	D2
1	LED_+3V3	LED_D3.0mm	D6
1	LED_+5V	LED_D3.0mm	D5
1	LED_+6V_A	LED_D3.0mm	D3
1	LED_+6V_B	LED_D3.0mm	D4
1	LS1 (DNP)	JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical	J13
1	LS2 (DNP)	JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical	J14
1	LS3 (DNP)	JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical	J15
1	LS4 (DNP)	JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical	J16
1	MP1584EN (5V Logic)	Converter_DCDC_MP1584EN	J4
1	PROG_UART0	PinHeader_1x06_P2.54mm_Vertical	J20
1	S1_BOT	PinHeader_1x03_P2.54mm_Vertical	J6
1	S1_TOP	PinHeader_1x03_P2.54mm_Vertical	J5
1	S2_BOT	PinHeader_1x03_P2.54mm_Vertical	J8
1	S2_TOP	PinHeader_1x03_P2.54mm_Vertical	J7
1	S8050	TO-92_Inline	Q2
1	SENSOR_ADC	PinHeader_1x04_P2.54mm_Vertical	J21
1	SENSOR_DIGITAL	PinHeader_1x08_P2.54mm_Vertical	J22
1	SW_BOOT	SW_PUSH_6mm_H5mm	SW2
1	SW_EN	SW_PUSH_6mm_H5mm	SW1
1	TP_+12V	TestPoint_Pad_D2.0mm	TP1
1	TP_+3V3	TestPoint_Pad_D2.0mm	TP5
1	TP_+5V	TestPoint_Pad_D2.0mm	TP4
1	TP_+6V_A	TestPoint_Pad_D2.0mm	TP2
1	TP_+6V_B	TestPoint_Pad_D2.0mm	TP3
1	TP_SPARE_GPIO33	TestPoint_Pad_D2.0mm	TP8
1	XH-M401 (6.0V 8A)	Converter_DCDC_XH-M401_8A	J2

Questions

How big is the FV CTRL RevA PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FV CTRL RevA use?

84 parts, built around the ESP32-WROOM-32, AMS1117-3.3, 1.5KE15CA and IRF9540NS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FV CTRL RevA KiCad files?

From the Masterltb/pcb repository on GitHub, at the commit this page was made from: the board is hardware/archive/reva/FV-CTRL_RevA.kicad_pcb and its schematic hardware/archive/reva/FV-CTRL_RevA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FV CTRL RevA design in my own project?

Its repository states no licence, so its author keeps all rights: ask Masterltb before reusing the design.

Category and platform

ESP32

Project files

Show this board on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/boards/masterltb-pcb-fv-ctrl-reva" title="FV CTRL RevA in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/boards/masterltb-pcb-fv-ctrl-reva.jpg" alt="FV CTRL RevA" width="1200" height="900">

A picture that opens the board, for a README

[![FV CTRL RevA](https://pcbkit.io/embed/boards/masterltb-pcb-fv-ctrl-reva.jpg?size=s)](https://pcbkit.io/boards/masterltb-pcb-fv-ctrl-reva)

Source

Repository: Masterltb/pcb
Board file: hardware/archive/reva/FV-CTRL_RevA.kicad_pcb
Commit: 01e28c8
Licence: Not stated

Similar boards

2 layers250 × 121 mm
PWM Schematic
Shriniketpk2124/Design-Assembly-and-Commissioning-of-a-GreenPHY-Based-EVSE-Signalling-and-Communication-Emulator
Mixed-signal EVSE prototype for IEC 61851 control-pilot signalling, Green PHY/SLAC, and ISO 15118-2 communication experiments.
109 parts
2 layers85 × 56 mm
HB RF ETH
alexreinert/PCB
Some of my PCBs
96 parts104
2 layers50 × 145 mm
SmartRemote
Circuit-Digest/Smart-Universal-Remote-with-Learning-function-and-Google-Assistant-Support
Smart Universal Remote with Learning function and Google Assistant Support
75 parts3
2 layers50 × 60 mm
RespiratorIF
DigitalRealitiesLab/AirResMask
AirRes Mask: A Precise and Robust Virtual Reality Breathing Interface Utilizing Breathing Resistance as Output Modality
48 parts3MIT
2 layers35 × 45 mm
LVGLDevKit
jppang/ESP32_MicroPython_LVGL_ST7789
Try to build an ESP32 firmware with LVGL and ST7789 drivers inside.
40 parts2
2 layers79.1 × 71.8 mm
PROJECT6 30A Home Automation with ESP32
adarshnarwariya12/PCB_Design
A collection of PCB design projects developed using KiCad.
32 parts1
2 layers106.3 × 84.4 mm
30A home Automation device
adivarpe/kicad_designs
in this i attached the multiple designs circuit which is designed from kicad .
33 parts
4 layers100 × 80 mm
Hackathon board v2
Brian-Nziza/ESP32-Hackathon-Board
KiCad 10 project. Board is 100 × 80 mm, four layers, fabricated by JLCPCB.
75 parts