

MS20 Filter Clone
these are some pcbs :~)
- Size
- 89 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 60
- Pads
- 218
- Tracks, vias
- 441, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Dec 2020
- Updated
- 13 Jun 2022
Overview
MS20 Filter Clone is an open-source printed circuit board by masonandrewmann, from the masonandrewmann/modular-synth-pcbs repository on GitHub. It is a 2-layer board of 89 × 70 mm with 97 parts on 60 nets, routed with 441 tracks and 0 vias.
It is built around the LM13700M, NE5532 and TL072, with the BC557 among its other parts. Its parts include 37 resistors, 15 connectors, 14 capacitors, 5 ICs and 2 diodes.
Main components
4LM13700M
SOIC-16-16V~-4.75V、4.75V~16V 0℃~+70℃ 110dB 2 2.6mA 20mA 400nA 4mV 50V/us 600nA 9.5V~32V SOIC-16 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierNE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational AmplifierTL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierBC557
TO-921 PNP 100mA 100nA 150MHz 45V 500mW 6V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
README
README.mdA collection of PCBs I've designed since getting into DIY modular synths. Do not assume that any of these designs work or are good, many of them have errors I have not fixed yet. If you want to get some manufactured, go ahead but I'd urge you to contact me first and I can let you know any quirks of the board first! :~)
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C5, C6, C7, C8, C10, C11, C12, C13 |
| 7 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R7, R22, R23, R24, R27, R33 |
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R11, R15, R19 |
| 4 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R13, R14 |
| 4 | 30k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25, R28, R34, R37 |
| 4 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R5, R20, R29 |
| 3 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18, R30, R36 |
| 2 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.0mm_Bigger_Holes | C9, C14 |
| 2 | 120k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R21, R35 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R32 |
| 2 | 1n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C3, C4 |
| 2 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12, R17 |
| 2 | BC557 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | LM13700 | Package_DIP:DIP-16_W7.62mm_Socket | U2, U6 |
| 1 | +12V | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J7 |
| 1 | -12V | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J10 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV5 |
| 1 | 150k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R26 |
| 1 | 1k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV3 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R31 |
| 1 | 470k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
| 1 | 470n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 4n7 | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | CV1 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J1 |
| 1 | CV2 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J2 |
| 1 | Cutoff | Connector_Wire:SolderWirePad_1x01_Drill1mm | J5 |
| 1 | GND | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J9 |
| 1 | HP_IN | Connector_Wire:SolderWirePad_1x01_Drill1mm | J6 |
| 1 | LP_IN | Connector_Wire:SolderWirePad_1x01_Drill1mm | J3 |
| 1 | NE5532 | Package_DIP:DIP-8_W7.62mm_Socket | U3 |
| 1 | Out | Connector_Wire:SolderWirePad_1x01_Drill1mm | J4 |
| 1 | Res1 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J13 |
| 1 | Res2 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J14 |
| 1 | Res3 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J15 |
| 1 | Res_CV | Connector_Wire:SolderWirePad_1x01_Drill1mm | J8 |
| 1 | Res_In | Connector_Wire:SolderWirePad_1x01_Drill1mm | J12 |
| 1 | Res_Out | Connector_Wire:SolderWirePad_1x01_Drill1mm | J11 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U5 |
The 77 most common of 97 parts.
More from masonandrewmann/modular-synth-pcbs
12- 2 layers176.3 × 101.6 mm

- 2 layers80.8 × 112.5 mm

- 2 layers110.2 × 116.8 mm

- 2 layers115.3 × 110 mm

Dual Universal Slope Generator - CGS
masonandrewmann/modular-synth-pcbs
these are some pcbs :~)
149 parts1 - 2 layers94.5 × 109.2 mm

- 2 layers84.1 × 65.5 mm

- 2 layers127 × 101.6 mm

- 2 layers110.5 × 54.1 mm

- 2 layers113.5 × 63.5 mm

Smooth and Stepped Generator - CGS
masonandrewmann/modular-synth-pcbs
these are some pcbs :~)
112 parts1 - 2 layers

- 2 layers127 × 101.6 mm

- 2 layers101.6 × 127 mm

Similar boards
- 2 layers73 × 78.1 mm

Pan Mix A
clarionut/YuSynth-Panning-Mixer-Output
An extensible version of the YuSynth Output mixer & VC-panner, minus the tone control circuitry
98 parts - 2 layers40 × 100 mm

- 2 layers236.9 × 126.6 mm

- 4 layers170 × 100 mm

Spring Reverb
powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts
313 parts11 - 2 layers100.3 × 160 mm

- 2 layers302 × 135 mm

- 2 layers100 × 100 mm

- 2 layers37 × 113.9 mm

Questions
How big is the MS20 Filter Clone PCB?
It measures 89 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MS20 Filter Clone use?
97 parts, built around the LM13700M, NE5532, TL072 and BC557. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MS20 Filter Clone KiCad files?
From the masonandrewmann/modular-synth-pcbs repository on GitHub, at the commit this page was made from: the board is MS20_Filter_Clone/MS20_Filter_Clone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MS20 Filter Clone design in my own project?
Its repository states no licence, so its author keeps all rights: ask masonandrewmann before reusing the design.