

BF22 Clone
these are some pcbs :~)
- Size
- 34 × 112 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 49
- Pads
- 213
- Tracks, vias
- 436, 27
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Dec 2020
- Updated
- 13 Jun 2022
Overview
BF22 Clone is an open-source printed circuit board by masonandrewmann, from the masonandrewmann/modular-synth-pcbs repository on GitHub. It is a 2-layer board of 34 × 112 mm with 95 parts on 49 nets, routed with 436 tracks and 27 vias.
It is built around the CA3080A, NE5532 and 2SC1623. Its parts include 40 resistors, 17 capacitors, 14 connectors, 6 transistors and 3 ICs.
Main components
3CA3080A
TO-99-8Programmable gain mode Transconductance Amplifier TO-99-8 Special Purpose AmplifiersRochester Electronics, LLCSpecial Purpose AmplifiersNE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational Amplifier2SC1623
SOT-323-55℃~+150℃ 1 NPN 100mA 100nA 200mW 250MHz 300 300mV 50V 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdA collection of PCBs I've designed since getting into DIY modular synths. Do not assume that any of these designs work or are good, many of them have errors I have not fixed yet. If you want to get some manufactured, go ahead but I'd urge you to contact me first and I can let you know any quirks of the board first! :~)
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R5, R6, R7, R8, R27, R28 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10, R11, R15, R18, R22, R23, R38 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C12, C13, C14, C15, C16, C17 |
| 5 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | 0Ohm, 0Ohm, 0Ohm, 0Ohm, 0Ohm |
| 3 | 10u | Capacitor_SMD:CP_Elec_4x5.4 | C6, C10, C11 |
| 3 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3, C5 |
| 3 | 2SC1623 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1, Q2, Q3 |
| 3 | D_Small | Diode_SMD:D_SOD-323F | D1, D2, D3 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17, R20 |
| 2 | 220p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C9 |
| 2 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q5, Q6 |
| 2 | 3k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R30, R31 |
| 2 | 47 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16, R21 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R12 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R29, R35 |
| 2 | SolderWirePad_1x01_Drill1mm | Connector_Wire:SolderWirePad_1x01_Drill1mm | -12V, -12V |
| 1 | +12V | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J6 |
| 1 | -12V | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J8 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R19 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R40 |
| 1 | 220u | Capacitor_SMD:CP_Elec_6.3x5.4 | C4 |
| 1 | 270k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R33 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R34 |
| 1 | 2N3819 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q4 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R36 |
| 1 | 33u | Capacitor_SMD:CP_Elec_5x5.7 | C8 |
| 1 | 3n3 | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 43k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R24 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
| 1 | 5k6 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R25 |
| 1 | 680 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13 |
| 1 | 7k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R32 |
| 1 | 820 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R26 |
| 1 | 82k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R37 |
| 1 | 910k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R39 |
| 1 | Att_1 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J11 |
| 1 | Att_3 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J13 |
| 1 | CA3080 | Package_DIP:DIP-8_W7.62mm_Socket | U3 |
| 1 | Cutoff_CV_1 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J2 |
| 1 | Cutoff_CV_2 | Connector_Wire:SolderWirePad_1x01_Drill1mm | J1 |
| 1 | Cutoff_Pot | Connector_Wire:SolderWirePad_1x01_Drill1mm | J12 |
| 1 | GND | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J7 |
| 1 | HP_In | Connector_Wire:SolderWirePad_1x01_Drill1mm | J10 |
| 1 | LP_In | Connector_Wire:SolderWirePad_1x01_Drill1mm | J9 |
| 1 | NE5532 | Package_DIP:DIP-8_W7.62mm_Socket | U2 |
| 1 | Out | Connector_Wire:SolderWirePad_1x01_Drill1mm | J4 |
| 1 | PWR | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J5 |
| 1 | Res_CV | Connector_Wire:SolderWirePad_1x01_Drill1mm | J3 |
| 1 | Res_Pot | Connector_Wire:SolderWirePad_1x01_Drill1mm | J14 |
| 1 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
The 91 most common of 95 parts.
More from masonandrewmann/modular-synth-pcbs
12- 2 layers176.3 × 101.6 mm

- 2 layers80.8 × 112.5 mm

- 2 layers110.2 × 116.8 mm

- 2 layers115.3 × 110 mm

Dual Universal Slope Generator - CGS
masonandrewmann/modular-synth-pcbs
these are some pcbs :~)
149 parts1 - 2 layers94.5 × 109.2 mm

- 2 layers84.1 × 65.5 mm

- 2 layers127 × 101.6 mm

- 2 layers110.5 × 54.1 mm

- 2 layers113.5 × 63.5 mm

Smooth and Stepped Generator - CGS
masonandrewmann/modular-synth-pcbs
these are some pcbs :~)
112 parts1 - 2 layers

- 2 layers127 × 101.6 mm

- 2 layers101.6 × 127 mm

Similar boards
- 2 layers236.9 × 126.6 mm

- 2 layers191.5 × 136.5 mm

Pu-18
xyzz/pu-18
PCB thickness is 1.2mm. To generate production files you should use KiKit.
554 parts40CC0-1.0 - 4 layers238.1 × 207.2 mm

SegaSaturn VA0 Repro
RGBeter/Sega_Saturn_VA0.5_Reproduction
Reproduction schematics and PCB of the Sega Saturn VA0.5 Main board
422 parts4CERN-OHL-S-2.0 - 4 layers188.1 × 90 mm

BackupProjects allisonbarfield personal 3 20250219
allisonmb/game-gear
Each aspect of the project is linked below, with README files indicating their functionality, how to run them, and known bugs.
208 parts - 2 layers

Small-7
NVlabs/Cypress
Cypress is a scalable, GPU-accelerated PCB placement method inspired by VLSI. It incorporates tailored cost functions, constraint handling, and optimized techniques adapted for PCB layouts.
52 parts56Apache-2.0 - 2 layers68 × 17 mm

- 2 layers56 × 102.5 mm

- 2 layers55 × 105 mm

Questions
How big is the BF22 Clone PCB?
It measures 34 × 112 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BF22 Clone use?
95 parts, built around the CA3080A, NE5532 and 2SC1623. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BF22 Clone KiCad files?
From the masonandrewmann/modular-synth-pcbs repository on GitHub, at the commit this page was made from: the board is BF22 Clone/BF22 Clone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BF22 Clone design in my own project?
Its repository states no licence, so its author keeps all rights: ask masonandrewmann before reusing the design.