4 layers80.1 × 22.2 mm
M2-smart iot module
antmicro/m2-smart-iot-module
https://antmicro.com/blog/2021/08/open-hardware-smart-m2-radio-module-for-iot/
212 parts30Apache-2.0
2 layers90.6 × 45.9 mm
EncoderStrainGuage
MASA-Dearborn/DFFPDeployable Fin Flight Package board
- Size
- 90.6 × 45.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 65
- Pads
- 269
- Tracks, vias
- 710, 215
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Nov 2019
- Updated
- 19 Feb 2020
Overview
EncoderStrainGuage is an open-source printed circuit board by MASA-Dearborn, from the MASA-Dearborn/DFFP repository on GitHub. It is a 2-layer board of 90.6 × 45.9 mm with 81 parts on 65 nets, routed with 710 tracks and 215 vias.
It is built around the CC2570RHAT, AP3428KTTR-G1 and MM8130-2600RA2. Its parts include 35 capacitors, 18 resistors, 10 inductors, 6 ICs and 5 connectors. It belongs with the PIC boards of this library.
Main components
3
CC2570RHAT
QFN-40-EP(6x6)-40℃~+85℃ -86dBm 1Mbps 2.4GHz 23.7mA 25.9mA 2V~3.6V 4dBm ISM SPI、UART QFN-40-EP(6x6) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
AP3428KTTR-G1
TSOT-25-40℃~+85℃ 1 1.5MHz 1A 2.5V~5.5V 40uA 600mV~5.5V Adjustable Buck Buck Built-in Yes TSOT-25 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
MM8130-2600RA2
SMD-40℃~+85℃ 1 2.1mm 50Ω 6GHz Board Side Inner Bore SMD Coaxial Connectors (RF) ROHSMurataCoaxial Connectors (RF)
README
README.mdDFFP
Deployable Fin Flight Package board
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R7, R9, R11, R14 |
| 4 | 100nf | Capacitor_SMD:C_0603_1608Metric | C10, C16, C17, C18 |
| 3 | 0 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L4, L5, L6 |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric | R8, R10, R12 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C5, C29 |
| 3 | 1pF | Capacitor_SMD:C_0402_1005Metric | C22, C33, C34 |
| 3 | 330P | Capacitor_SMD:C_0603_1608Metric | C25, C27, C31 |
| 3 | 470 | Resistor_SMD:R_0603_1608Metric | R1, R16, R17 |
| 3 | NP | Capacitor_SMD:C_0603_1608Metric | C26, C28, C32 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R6 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C4, C21 |
| 2 | 2.2uH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L3 |
| 2 | 2nH | Inductor_SMD:L_0402_1005Metric | L7, L8 |
| 2 | 500 TRIM | DFFP-master:TRIM_3314J-1-202E | RV1, RV2 |
| 2 | MM8130-2600RA2 | MASA_Library:MURATA_MM8130-2600RA2 | J2, J3 |
| 1 | .1u | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | .1uF | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 1.5 pf | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 10k TRIM | DFFP-master:TC33X-2_1 | RV3 |
| 1 | 10kOhm | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1m | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 1nH | Inductor_SMD:L_0402_1005Metric | L9 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 2.4 pf | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 220pf | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 22pF | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 3.9 nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | 3nH | Inductor_SMD:L_0402_1005Metric | L10 |
| 1 | 450k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 47219-2001 | DFFP-master:SD_472192001 | J7 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 9 MOmhs | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | ? | Capacitor_SMD:C_0603_1608Metric | NP1 |
| 1 | AP3428KTTR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Antenna | MASA_Library:ANTC3216X140N | AE1 |
| 1 | CC2570RHAT | QFN40P500X500X90-41N:QFN40P500X500X90-41N | U3 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_01x12 | DFFP-master:1-1734595-2 | J4 |
| 1 | Crystal | CM7V-T1A_32.768KHZ_12.5PF_20PP:CM7VT1A32768KHZ125PF20PPMTAQC | Y2 |
| 1 | Crystal_GND24 | FA-128_32.0000MF20X-K3:FA128 | Y1 |
| 1 | LM60CIM3_NOPB | LM60CIM3_NOPB:SOT95P237X112-3N | IC1 |
| 1 | MCP6N11T | DFFP-master:MCP6N11T-010E | U5 |
| 1 | OPAMP | MCP6001T-I_OT:SOT95P270X145-5N | U2 |
| 1 | PIC16LF1826-I_SO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | IC2 |
Questions
How big is the EncoderStrainGuage PCB?
It measures 90.6 × 45.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EncoderStrainGuage use?
81 parts, built around the CC2570RHAT, AP3428KTTR-G1 and MM8130-2600RA2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EncoderStrainGuage KiCad files?
From the MASA-Dearborn/DFFP repository on GitHub, at the commit this page was made from: the board is EncoderStrainGuage.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EncoderStrainGuage design in my own project?
Its repository states no licence, so its author keeps all rights: ask MASA-Dearborn before reusing the design.
Similar boards
- 4 layers49.1 × 40 mm
- 4 layers104 × 144 mm
WQ PCB
332753-art/Water_Quality_Monitoring
portable Water Quality Monitoring System for Live Fish Transport
78 partsApache-2.0 - 4 layers55 × 85 mm
SAE Cellular Module
ephrenm/VehiCell
NRF9151-based cellular telemetry device designed for a FSAE EV vehicle.
152 parts - 4 layers68 × 100 mm
- 4 layers34 × 34 mm
BSN C23
Stachu1/BLE_Sensor_Node
KiCad project: BSN-N54.kicadpro. See the root README for the board naming scheme.
47 parts - 2 layers162.9 × 178.9 mm
- 2 layers177.2 × 114.3 mm
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
81 parts184