Skip to the content
2 layers214.9 × 91.5 mmAws, the printed circuit board in 3D

AWS Project Gen4

Size
214.9 × 91.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
17
Pads
126
Tracks, vias
47, 75
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
1 Jan 2026
Updated
7 Oct 2026

Overview

Aws is an open-source printed circuit board by marydovika, from the marydovika/AWS repository on GitHub. It is a 2-layer board of 214.9 × 91.5 mm with 33 parts on 17 nets, routed with 47 tracks and 75 vias.

Its parts include 18 connectors and 2 switches.

README

README.md

//////////////////////////////////////////////////////////////////////////////////////////////////

System Description:

Automatic Weather Stations (AWS) play a critical role in environmental monitoring, yet their deployment in remote and energy-constrained locations remains limited by rigid and monolithic power architectures. Conventional systems are often designed for single energy sources, leading to inefficiencies, frequent power interruptions, high maintenance costs, and poor adaptability to dynamic environmental conditions. This research proposes the development of a modular and adaptive power electronics system architecture tailored for energy-constrained AWS deployments. Modular design; The modular design introduces swappable converter topologies that allow scalable integration (multiplexing) of multiple energy sources, including solar, DC input and batteries, while simplifying upgrades, repairs, and fault isolation. Adaptive design; Complementing the modular design, an adaptive control strategy will be implemented to dynamically optimize power flow in response to load variations, energy resource intermittency, in-system parameter drifts, and external/environmental disturbances, thereby enhancing system stability and efficiency. The study will involve system design, prototype development, and two algorithm development (both AMPC-based), followed by performance evaluation under varying operating conditions and benchmarking. Field deployment of Final product (PCB, Case Unit, and Mounting frame).

Expected outcomes include; improved system energy efficiency, fault tolerance, and operational autonomy, ensuring more reliable and sustainable weather data collection in energy resource-constrained and off-grid regions. The findings of this research will contribute to advancing resilient power system solutions that support agriculture, public safety, infrastructure planning, and climate research. with a civil and possible military adaptation.

Project is funded by: https://www.ademneaproject.net

//////////////////////////////////////////////////////////////////////////////////////////////////

Parts

33
QtyValueFootprintReferences
10Screw_Terminal_01x02TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_HorizontalJ25, J25, J25, J26, J26, J26, J26, J26, J26, J27
5, , , ,
5B3B-XH-A_LF__SN_B3B-XH-A_LF__SN_:JST_B3B-XH-A_LF__SN_J3, J20, J21, J32, J37
2B4B-XH-A_LF__SN_B4B-XH-A_LF__SN_:JST_B4B-XH-A_LF__SN_J17, J28
2SW_SPSTButton_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mmSW6, SW6
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ39

The 25 most common of 33 parts.

More from marydovika/AWS

3
  • 2 layers206.3 × 91.3 mmAWS PROJECT, the printed circuit board in 3D

    AWS PROJECT

    marydovika/AWS

    AWS Project Gen4

    317 parts
  • 2 layers175 × 90 mmAWS POWER, the printed circuit board in 3D

    AWS POWER

    marydovika/AWS

    AWS Project Gen4

    44 parts
  • 2 layers140 × 90 mmAWS GATEWAY, the printed circuit board in 3D

    AWS GATEWAY

    marydovika/AWS

    AWS Project Gen4

    36 parts

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the Aws PCB?

It measures 214.9 × 91.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Aws use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aws KiCad files?

From the marydovika/AWS repository on GitHub, at the commit this page was made from: the board is KiCAD FILES__PCB__Ver2/aws.kicad_pcb and its schematic KiCAD FILES__PCBA__Ver1/AWS PROJECT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aws design in my own project?

Its repository states no licence, so its author keeps all rights: ask marydovika before reusing the design.