2 layers79.7 × 62.6 mm
OpenReflow
CarlosGS/OpenReflow
Simple reflow oven controller that is configurable from a phone
39 parts25GPL-3.0
2 layers58 × 90 mm
SinglePhaseEnergyMonitor
martin2250/SinglePhaseEnergyMonitor5an adapter to plug between a device and an outlet, to monitor electricity usage and provide data to influxdb
- Size
- 58 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 41
- Pads
- 144
- Tracks, vias
- 248, 4
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Dec 2018
- Updated
- 21 Feb 2019
Overview
SinglePhaseEnergyMonitor is an open-source printed circuit board by martin2250, from the martin2250/SinglePhaseEnergyMonitor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 58 × 90 mm with 47 parts on 41 nets, routed with 248 tracks and 4 vias.
It is built around the ESP-07, IRM-02-3.3 and AT24CS32-STUM-T. Its parts include 17 resistors, 14 capacitors, 5 connectors, 2 ICs and 1 crystal. It belongs with the ESP8266 boards of this library.
Main components
3
ESP-07
SMD-16P,21.2x16mm-40℃~+125℃ -98dBm 19.5dBm 2.4GHz 3.3V 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、I2C、HSPI、I2S SMD-16P,21.2x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
IRM-02-3.3
DIP,33.7x22.2mm1 2W 3.3V 600mA 66% 85VAC~305VAC DIP,33.7x22.2mm Power Module/Power Supply ROHSMWAC-DC Power Modules
AT24CS32-STUM-T
SOT-23-5-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 32Kbit 5ms Hardware write protection function、Noise suppression function I2C SOT-23-5 EEPROM ROHSMicrochip TechnologyEEPROM
README
README.mdSinglePhaseEnergyMonitor
an adapter to plug between a device and an outlet, to monitor electricity usage and provide data to influxdb
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100k | Resistor_SMD:R_1206_3216Metric | R5, R6, R7, R8, R9, R10, R11 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R14, R15, R17, R19 |
| 4 | 22n | Capacitor_SMD:C_0805_2012Metric | C3, C4, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 2 | 0R | Resistor_SMD:R_1206_3216Metric | R20, R21 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric | R2, R4 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 12p | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 330n | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 1 | 10m | Resistor_THT:R_Box_L14.0mm_W5.0mm_P9.00mm | R3 |
| 1 | 2A | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | 8.192M | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | AT24CS32-STUM | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ATM90E26_ATM90E26 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | M1 |
| 1 | Conn_01x01 | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | J5 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | TerminalBlock_RND:TerminalBlock_RND_205-00046_1x03_P5.00mm_Horizontal | J1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | ESP-07 | RF_Module:ESP-07 | U1 |
| 1 | IRM-02-3.3 | Converter_ACDC:Converter_ACDC_MeanWell_IRM-02-xx_THT | PS1 |
| 1 | LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | R | Resistor_SMD:R_1206_3216Metric | R12 |
| 1 | R_Pack04 | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
Questions
How big is the SinglePhaseEnergyMonitor PCB?
It measures 58 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SinglePhaseEnergyMonitor use?
47 parts, built around the ESP-07, IRM-02-3.3 and AT24CS32-STUM-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SinglePhaseEnergyMonitor KiCad files?
From the martin2250/SinglePhaseEnergyMonitor repository on GitHub, at the commit this page was made from: the board is Hardware/SinglePhaseEnergyMonitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SinglePhaseEnergyMonitor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers49 × 60 mm
Wifi switch
byggarobot/wifi-switch
A small board for controlling a load, such as lamps via MQTT over WiFi.
32 parts6 - 2 layers70.2 × 33 mm
- 2 layers99.6 × 64.3 mm
Valhalla ufh sensor SMT
csdexter/valhalla
Version-controlled material related to the Valhalla project
54 partsGPL-3.0 - 2 layers50 × 50 mm
- 2 layers65 × 59 mm
Mender shield
joelguittet/mender-shield
The Mender Shield illustrates the capability to run a Mender client on heterogeneous platforms
54 parts5Apache-2.0 - 4 layers100 × 100 mm
LED Panel Controller
drewsum/LED_Panel_Controller
Controls a single 64x64 HUB75E LED Panel
590 parts2GPL-3.0 - 6 layers65 × 55.8 mm
AES42HAT
s13n/AES42HAT
A digital audio interface in the shape of a Raspberry Pi Hat for AES42 microphones and more.
232 parts1