
LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

A general purpose library for interfacing LCD displays with Arduino and AVR microcontrollers
Backpack is an open-source printed circuit board by marsairforce, from the marsairforce/hd44780_lcd repository on GitHub. It is a 2-layer board of 15.2 × 43.2 mm with 6 parts on 16 nets, routed with 94 tracks and 7 vias.
It is built around the 74HC595. Its parts include 2 connectors, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards of this library.
This is a Kicad project for a printed circuit board to place a 74HC595 on the back of a LCD display.
Board available on OSHPark: https://oshpark.com/projects/P1p8G9Nj
All parts are available on Digikey (except the circuit board, link above..)
| Part Number | Description | Price |
|---|---|---|
| MC74HC595ADR2GOSCT-ND | IC SHIFT REGISTR 8BIT 3ST 16SOIC | $0.58 |
| 987-1014-1-ND | TRIMMER 10K OHM 0.25W SMD | $1.75 |
| 987-1015-1-ND | TRIMMER 1K OHM 0.25W SMD | $1.75 |
| WM4103-ND | CONN HEADER 5POS .100 R/A TIN | $0.58 |
| OSH Park boards | Pack of 3 | * $2.13 |
So the cost to build one backpack module is about $7 CDN plus taxes. One could do better ordering bulk quantities of these components, or substituting for things on hand in your junk bin.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitors_SMD:C_0603 | C1 |
| 1 | 10K | Potentiometers:Potentiometer_Trimmer_Vishay_TS53YJ | RV2 |
| 1 | 1K | Potentiometers:Potentiometer_Trimmer_Vishay_TS53YJ | RV1 |
| 1 | 74HC595 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U1 |
| 1 | Conn_01x05 | Pin_Headers:Pin_Header_Angled_1x05_Pitch2.54mm | J1 |
| 1 | Conn_01x16 | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | J2 |

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts

TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages



It measures 15.2 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the marsairforce/hd44780_lcd repository on GitHub, at the commit this page was made from: the board is backpack/backpack.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask marsairforce before reusing the design.