

Low profile
- Size
- 94 × 74 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 78
- Pads
- 359
- Tracks, vias
- 232, 120
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Jul 2024
- Updated
- 6 Nov 2026
Overview
Low profile is an open-source printed circuit board by marmbrus, from the marmbrus/circuits repository on GitHub. It is a 4-layer board of 94 × 74 mm with 94 parts on 78 nets, routed with 232 tracks and 120 vias.
It is built around the ESP32-S3-WROOM-1-N8, TPD1E05U06DPY and UCC27517DBVR-TP, with the ADS1115IDGSR, TPS54202DDC and BTS70021EPPXUMA1 among its other parts. Its parts include 23 capacitors, 19 resistors, 12 ICs, 11 connectors and 6 diodes. It belongs with the ESP32 boards of this library.
Main components
11ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTPD1E05U06DPY
DFN21 Channel ESD Protection Device for Super-Speed (up to 6 Gbps) InterfaceTexas InstrumentsUncategorisedUCC27517DBVR-TP
SOT-23-50℃~+125℃ 1 100uA 11ns 12ns 1V~1.2V 2.4V~2.6V 300mA 33ns 33ns 4.5V~18V 600mA Enable shutdown、Interleaved conduction protection Low Side MOSFET SOT-23-5 Gate Drivers ROHSTECH PUBLICGate DriversADS1115IDGSR
VSSOP-10-40℃~+125℃ 16 1LSB 2 2.048V 2V~5.5V 500nA 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)TPS54202DDC
SOT23-64.5V to 28V Input, 2A Output, EMI Friendly Synchronous Step Down ConverterTexas InstrumentsUncategorisedBTS70021EPPXUMA1
TSSOP-14-EP-150mil-40℃~+150℃ 1 2.6mΩ 21A 6V~18V Active High High Side Switch Overvoltage protection、Undervoltage lockout、Reverse voltage protection、Overcurrent Protection、Over temperature protection、Latch protection、Short-Circuit Protection TSSOP-14-EP-150mil Power Distribution Switches ROHSInfineon TechnologiesPower Distribution SwitchesLM66100DCK
SC-70-6-40℃~+125℃ 1 1.5A 1.5V~5.5V 150nA 95mΩ Integrated FET Reverse current blocking、Reverse polarity protection、With enable SC-70-6 ORing Controllers ROHSTexas InstrumentsPower Distribution SwitchesTVS0500DRV
WSON-6(2x2)-40℃~+125℃ 155pF 400W@8/20us 43A@8/20us 5V 7.9V 70pA 9.2V IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional WSON-6(2x2) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBM04B-SRSS-TB(LF)(SN)
SMD,P=1mm-25℃~+85℃ 1 1A 1mm 1x4P 3.6mm 4 4.25mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SR Surface Mount,Vertical Tin UL94V-0 White SMD,P=1mm Wire To Board Connector ROHSJSTWire To Board ConnectorXAL4040-103MEC
SMD,4x4mm10uH 3.1A 3A 84mΩ ±20% SMD,4x4mm Power Inductors ROHSCoilcraftPower Inductors
README
readme.mdPlugins
Template Setup
Preferences -> Configure Paths...
- KICAD_USER_TEMPLATE_DIR=~/workspace/circuits/templates
Component Setup
easyeda2kicad
- github
easyeda2kicad --output ~/workspace/circuits/libraries/easyeda2kicad --full --lcsc_id=...
Schematics Editor -> Preferences -> Manage Symbol Libraries...
easyeda2kicad -> circuits/libraries/easyeda2kicad/easyeda2kicad.kicad_sym
PCB Editor -> Preferences -> Manage Footprint Libraries...
easyeda2kicad -> circuits/libraries/easyeda2kicad/easyeda2kicad.pretty
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LabeledTestPoint | easyeda2kicad:LabeledTestPoint | TP1, TP2, TP3, TP4, TP5, TP7, TP9, TP14, TP15, TP16 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R10, R11, R12 |
| 6 | 39-30-1020 | easyeda2kicad:CONN-TH_2P-P5.50_39-30-1020 | CN5, CN6, CN9, CN10, CN13, CN14 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C10, C20, C28, C30 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C15, C17, C18, C19 |
| 4 | 73412-0110 | easyeda2kicad:ANT-SMD_73412-0110 | RF1, RF2, RF3, RF4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C9, C27, C29 |
| 3 | 22uF | Capacitor_SMD:C_1206_3216Metric | C8, C12, C13 |
| 3 | D_TVS | Diode_SMD:D_SMB | D3, D5, D6 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D4 |
| 2 | 1.5k | Resistor_SMD:R_0603_1608Metric | R15, R18 |
| 2 | 120 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R28, R29 |
| 2 | 3.3k | Resistor_SMD:R_0603_1608Metric | R17, R20 |
| 2 | 39303035 | easyeda2kicad:CONN-TH_39303035 | CN1, CN2 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R16, R19 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | BTS70021EPPXUMA1 | easyeda2kicad:PG-TSDSO-14_L4.9-W3.9-P0.65-LS6.0-BL-EP | U8, U9 |
| 2 | C_Polarized | Capacitor_SMD:CP_Elec_8x11.9 | C5, C6 |
| 2 | KEY-SMD_B3U-1000PM | easyeda2kicad:KEY-SMD_B3U-1000PM | SW1, SW2 |
| 2 | TPD1E05U06DPY | Package_SON:Texas_DPY0002A_0.6x1mm_P0.65mm | U7, U10 |
| 2 | UCC27517DBVR | easyeda2kicad:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U13, U14 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 100nf | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 13.3k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 22uF | Capacitor_SMD:C_Elec_5x5.8 | C3 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 428202214 | easyeda2kicad:CONN_SDA-42820-0002_02_RC_MOL | J2 |
| 1 | 49.9 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 75pF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | ADS1115IDGSR | easyeda2kicad:MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U5 |
| 1 | BM04B-SRSS-TB(LF)(SN) | easyeda2kicad:CONN-SMD_BM04B-SRSS-TB | CN4 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | LM66100DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U2 |
| 1 | TPS54202DDC | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | TPS73733DCQ_C5220270 | easyeda2kicad:SOT-223-6_L6.5-W3.5-P1.27-LS7.0-BR | U4 |
| 1 | TVS0500DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U6 |
| 1 | XAL4040-103MEC | easyeda2kicad:IND-SMD_L4.0-W4.0-A | L1 |
More from marmbrus/circuits
12- 4 layers100 × 91.4 mm

- 4 layers138 × 125 mm

- 4 layers138 × 104 mm

- 4 layers68.8 × 135.2 mm

- 4 layers125.5 × 154.5 mm

- 4 layers295.1 × 12 mm

- 4 layers70 × 82 mm

- 4 layers70 × 62 mm

- 4 layers94 × 74 mm

- 4 layers121.5 × 154.3 mm

- 4 layers70 × 45 mm

- 4 layers63 × 63 mm

Similar boards
- 4 layers212 × 116 mm

Eswitch simple
dpeckham/eswitch
8-channel ESP32-S3 + PROFET+2 (BTS7008-1EPP) 12V load switch with 3-position ATO fuse bypass, KiCad 10, script-generated
230 parts - 4 layers80 × 70 mm

- 8 layers42 × 40 mm

- 4 layers65 × 66 mm

Main V2
MCiuzelis/LituanicaX_AutonomousCarPlatform
Mechanical and electrical design files for the LituanicaX autonomous RC car: a Raspberry Pi 5–based robot that navigates a cone-track circuit using a depth camera.
69 parts - 2 layers60.5 × 95 mm

Phylax Version 3
ta007403/PHYLAX
PHYLAX (Greek φύλαξ, "guardian") is an open-source, Bitcoin-only hardware wallet built around a simple idea: no black-box chips, no wireless radios, no telemetry, and firmware you can read and verify yourself.
65 parts - 4 layers50 × 50 mm

LFX FC R2
nguyencanhanh/luckfox-rv1103-drone
AI quadcopter on one RV1103 (Luckfox Pico Mini B): Linux + RISC-V MCU flight loop, SITL with 3D pilot view, KiCad flight-controller board
142 partsMIT - 2 layers137 × 84 mm

ESP32-Geiger Counter
AronASzucs/Avalanche32
Handheld ESP32-S3 Geiger counter with a firmware-regulated 400 V boost, SBM-20 tube, USB-C charging and OLED display.
89 parts3 - 2 layers120 × 100 mm

Enose PCB
Tobias66662/Bachelor-Project-PCB-Designs
PCB to be used in the Enose (for Bachelor Project)
157 parts1
Questions
How big is the Low profile PCB?
It measures 94 × 74 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Low profile use?
94 parts, built around the ESP32-S3-WROOM-1-N8, TPD1E05U06DPY, UCC27517DBVR-TP and ADS1115IDGSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Low profile KiCad files?
From the marmbrus/circuits repository on GitHub, at the commit this page was made from: the board is leds/low_profile/low_profile.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Low profile design in my own project?
Its repository states no licence, so its author keeps all rights: ask marmbrus before reusing the design.