2 layers161 × 177 mm
2 layers160 × 35 mm
Ir train detector
MarkusFischer/ir-train-detector- Size
- 160 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 128
- Nets
- 103
- Pads
- 348
- Tracks, vias
- 623, 163
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Dec 2022
- Updated
- 30 Apr 2024
Overview
Ir train detector is an open-source printed circuit board by MarkusFischer, from the MarkusFischer/ir-train-detector repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 160 × 35 mm with 128 parts on 103 nets, routed with 623 tracks and 163 vias.
It is built around the MSP430G2553IPW28, LM324AD and AP63300WU, with the FT231XS-R, LM358 and AO3407A among its other parts. Its parts include 50 resistors, 23 capacitors, 11 diodes, 11 connectors and 6 transistors. It belongs with the MSP430 boards of this library.
Main components
6
MSP430G2553IPW28
TSSOP-28-40℃~+85℃ 1.8V~3.6V 10bit 16 Bit 16KB 16MHz 24 512Byte Built-in FLASH MSP430 CPU16 TSSOP-28 Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
LM324AD
SOIC-14-16V~-1.5V、1.5V~16V -25℃~+85℃ 1.2MHz 2nA 300nA 35nV/√Hz@1kHz 3V~32V 4 500V/ms 60mA 7mV 800uA 80dB EMI filtering/RF suppression SOIC-14 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
AP63300WU
TSOT-23-6-40℃~+125℃ 1 22uA 3.8V~32V 3A 500kHz 800mV~31V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
FT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB Converters
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
AO3407A
SOT-231 P-Channel 1.4W 1.8V 14.3nC@4.5V 30V 37mΩ@10V、52mΩ@4.5V 4.2A 700pF 75pF SOT-23 MOSFETs ROHSUMWMOSFETs
Parts
128| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10k | Resistor_SMD_AKL:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R10, R15, R16, R18, R21, R22, R34, R35, R36, R37, R45, R46, R47, R48, R49 |
| 16 | 470R | Resistor_SMD_AKL:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R11, R12, R13, R17, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33 |
| 12 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | 3V3, GND, TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 9 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D5, D6, D7, D8, D9, D10, D11 |
| 7 | 100n | Capacitor_SMD_Handsoldering_AKL:C_0603_1608Metric | C5, C6, C8, C11, C14, C17, C19 |
| 6 | 18R | Resistor_SMD_AKL:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5, R19, R38, R39, R40, R41 |
| 6 | 33n | Capacitor_SMD_Handsoldering_AKL:C_0603_1608Metric | C13, C18, C20, C21, C22, C23 |
| 6 | 470k | Resistor_SMD_AKL:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R20, R42, R43, R44, R50 |
| 6 | AO3407A | Package_TO_SOT_SMD_AKL:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | Screw_Terminal_01x03 | TerminalBlock_RND:TerminalBlock_RND_205-00013_1x03_P5.00mm_Horizontal | J4, J6, J8, J9, J10, J11 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3 |
| 2 | 10u | Capacitor_SMD_Handsoldering_AKL:C_1206_3216Metric | C3, C4 |
| 2 | 22u | Capacitor_SMD_Handsoldering_AKL:C_1206_3216Metric | C15, C16 |
| 2 | 27R | Resistor_SMD_AKL:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4 |
| 2 | 47p | Capacitor_SMD_Handsoldering_AKL:C_0805_2012Metric | C2, C7 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 1n | Capacitor_SMD_Handsoldering_AKL:C_0805_2012Metric | C10 |
| 1 | 30k1 | Resistor_SMD_AKL:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R9 |
| 1 | 32768Hz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | 470u | Capacitor_THT_AKL:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 47k | Resistor_SMD_AKL:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 4k7 | Resistor_SMD_AKL:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
| 1 | 4u7 | Inductor_THT_AKL:L_Radial_D7.0mm_P3.00mm | L1 |
| 1 | 4u7 | Capacitor_THT_AKL:CP_Radial_D4.0mm_P1.50mm | C9 |
| 1 | 56p | Capacitor_SMD_Handsoldering_AKL:C_0805_2012Metric | C12 |
| 1 | 93k1 | Resistor_SMD_AKL:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R8 |
| 1 | AB05S | Diode_SMD_Handsoldering_AKL:Diode_Bridge_Diotec_ABS | D1 |
| 1 | AP63300WU | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U1 |
| 1 | BSL_SEL | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | FT231XS | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U3 |
| 1 | JTAG | Connector_IDC:IDC-Header_2x07_P2.54mm_Vertical | J2 |
| 1 | Jumper_2_Open | 4ms_SolderJumper:JUMPER_SMD_1x2 | JP1 |
| 1 | LED_PWR | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | LM324A | Package_SO_AKL:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | LM358 | Package_SO_AKL:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MSP430G2553IPW28 | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U4 |
| 1 | ST_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_RND:TerminalBlock_RND_205-00007_1x08_P5.00mm_Horizontal | J7 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP11 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J5 |
The 127 most common of 128 parts.
Questions
How big is the Ir train detector PCB?
It measures 160 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ir train detector use?
128 parts, built around the MSP430G2553IPW28, LM324AD, AP63300WU and FT231XS-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ir train detector KiCad files?
From the MarkusFischer/ir-train-detector repository on GitHub, at the commit this page was made from: the board is board/ir-train-detector.kicad_pcb and its schematic board/ir-train-detector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ir train detector design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers50 × 65 mm
Nsumo
artfulbytes/nsumo_hardware
A 2-layer PCB for a small sumobot including MSP430G2553, regulators, motor drivers, and IR receiver.
81 parts34MIT - 2 layers79 × 89 mm
Bms v1
azerimaker/BMS_3-5S
3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.
175 parts22 - 2 layers21.6 × 60 mm
CheeseDip
upsidedownlabs/MSP430-Breadstick
Texas Instrument MSP430G2553 based development board.
63 parts22 - 2 layers52.9 × 22.9 mm
MSP430G2553-Feather
upsidedownlabs/MSP430G2553-Feather
MSP430G2553 based Adafruit feather compatible board 🪶
76 parts10 - 2 layers24 × 42 mm
- 2 layers45.7 × 31.8 mm
- 4 layers56 × 40 mm
Ver2 transmiteer
tonycung/0-10V-to-4-20mA-Converter
A simple 0–10 V to 4–20 mA analog signal converter designed with KiCad.
66 parts