

PLATO JUNCTION BOARD
- Size
- 45.4 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 29
- Pads
- 129
- Tracks, vias
- 362, 57
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Oct 2025
- Updated
- 3 Nov 2025
Overview
PLATO JUNCTION BOARD is an open-source printed circuit board by mark-helwig, from the mark-helwig/HCRL_Plato_Series_PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.4 × 26 mm with 28 parts on 29 nets, routed with 362 tracks and 57 vias.
It is built around the R-78E5.0-0.5, MCR12DCNT4G and F31W-1A7H1-11008, with the DLW21SN900SQ2L, NUP2105L and TFM-108-02-L-D among its other parts. Its parts include 6 capacitors, 5 diodes, 4 resistors, 3 connectors and 1 IC.
Main components
8R-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesMCR12DCNT4G
TO-252-2(DPAK)1 SCR 1.9V 12A 1V 40mA 800V TO-252-2(DPAK) Thyristors (SCR)/Modules ROHSLittelfuseThyristors (SCR)/ModulesF31W-1A7H1-11008
SMD,P=0.5mm-40℃~+105℃ 0.5mm 4.25mm 8P Gold Phosphor bronze Single-side Contact/Vertical Slide Lock Surface Mount,Vertical SMD,P=0.5mm FFC, FPC (Flat Flexible) Connector Assemblies ROHSAmphenolFFC, FPC (Flat Flexible) Connector AssembliesDLW21SN900SQ2L
SMD-4P,2x1.2mm-40℃~+85℃ 10MΩ 125V 2 330mA 50V 90Ω@100MHz SMD-4P,2x1.2mm Common Mode Filters ROHSMurataCommon Mode FiltersNUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)TFM-108-02-L-D
-Wire To Board ConnectorSamtecRLS-397
18121.32A 140mΩ 2.1A 3.9uH ±20% 1812 Power Inductors ROHSRECOM PowerPower InductorsSMBJ24A
DO-214AA(SMB)-55℃~+150℃ 15.4A 24V 26.7V 38.9V 5uA 600W TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6 |
| 3 | F31W-1A7H1-11008 | F31W:AMPHENOL_F31W-1A7H1-11008 | FT1, FT2, FT3 |
| 2 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | DLW21SN900SQ2L | DLW21SN900SQ2L:DLW21SN900SQ2L | FL1, FL2 |
| 2 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D4, D5 |
| 2 | TFM-108-02-L-D | TFM-108-02:SAMTEC_TFM-108-02-L-D | J2, J3 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 670 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | CAN0_TERM | JumperVariant:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm_SMALLER | JP1 |
| 1 | CAN1_TERM | JumperVariant:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm_SMALLER | CAN1 120Ω |
| 1 | DDZ30CSF-7 | Diode_SMD:D_SOD-323F | D2 |
| 1 | DE9_Receptacle_MountingHoles | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm | J1 |
| 1 | Fuse - 7A | Fuse:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | MCR12DCNT4G | Custom:TO-252-2-KAG_FIX | D3 |
| 1 | R-78E5.0-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U1 |
| 1 | RLS-397 | RLS-397:IND_RLS-397 | L1 |
| 1 | SMBJ24A | Diode_SMD:D_SMB_Handsoldering | D1 |
Similar boards
- 4 layers160 × 110 mm

- 4 layers45 × 60 mm

HPM5361-RMCS Slave V1.0
Kaiser041224/HPM5361-RMCS_Slave-Pro
HPM5361-RMCSSlave-V1.0 是一个基于 KiCad 9 的硬件工程,核心主控为 HPM5361ICB1。从顶层框图、层级原理图和关键器件选型来看,这块板更像一块面向机器人/运动控制场景的从控板,用于通信汇聚、PWM 外设输出、姿态感知、板载存储和基础人机交互。
222 parts2 - 4 layers40.5 × 40.5 mm

HPM5361-RMCS Slave Lite
Kaiser041224/HPM5361-RMCS_Slave-Lite
HPM5361-RMCSSlave-Lite 是一个基于 HPM5361IEG1 的嵌入式控制板。以下说明是根据当前 KiCad 工程中的原理图层级、器件选型和 PCB 丝印整理出来的硬件简介;从接口组合来看,这块板更像是一个面向机器人或分布式控制系统的从控/通信节点。
179 parts1 - 4 layers146 × 102 mm

HPM6E00EVKRevC
joelxue123/hpm6e00evk-ethercat-motor-bridge
This workspace is for the HPM6E00EVK RevC EtherCAT-to-UART motor bridge.
562 parts - 2 layers100 × 80 mm

Meganecan gw
Barbedx/MeganeCAN
ESP32-based CAN-bus companion for Renault Megane 2 infotainment displays.
68 parts3 - 4 layers65 × 56 mm

- 2 layers48 × 63 mm

Pod PCB V3
ka1e27/dreams
Autonomous survey catamaran: CV-based obstacle avoidance, environmental sensing, and cellular telemetry to a web dashboard.
54 parts - 6 layers76 × 46.4 mm

Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39
Questions
How big is the PLATO JUNCTION BOARD PCB?
It measures 45.4 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PLATO JUNCTION BOARD use?
28 parts, built around the R-78E5.0-0.5, MCR12DCNT4G, F31W-1A7H1-11008 and DLW21SN900SQ2L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PLATO JUNCTION BOARD KiCad files?
From the mark-helwig/HCRL_Plato_Series_PCB repository on GitHub, at the commit this page was made from: the board is PLATO_JUNCTION_BOARD.kicad_pcb and its schematic PLATO_JUNCTION_BOARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PLATO JUNCTION BOARD design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).