

Draco FT Amp 2024
- Size
- 45.3 × 33.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 45
- Pads
- 207
- Tracks, vias
- 557, 91
- Pours
- 62
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Dec 2024
- Updated
- 7 Dec 2024
Overview
Draco FT Amp 2024 is an open-source printed circuit board by mark-helwig, from the mark-helwig/HCRL_Draco3_PCBs repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.3 × 33.8 mm with 58 parts on 45 nets, routed with 557 tracks and 91 vias.
It is built around the AP3015, 1SS404,H3F and SS14. Its parts include 28 capacitors, 11 resistors, 8 ICs, 3 connectors and 2 diodes. It belongs with the audio and music boards of this library.
Main components
3AP3015
micro power DC-DC converterDiodes IncorporatedUncategorised1SS404,H3F
SC-76(SOD-323)1 Independent 20V 300mA 450mV@300mA 50uA@20V 700mA SC-76(SOD-323) Schottky Diodes ROHSToshibaSchottky DiodesSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1u | Capacitor_SMD:C_0603_1608Metric | C5, C8, C9, C13, C15, C16, C17, C21, C31, C33 |
| 10 | 3.9u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C7, C11, C12, C26, C27, C28 |
| 8 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C6, C10, C14, C18, C20, C22, C32, C34 |
| 6 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6 |
| 6 | LTC6911HMS-1-PBF | LTC6911-1:MSOP-10_MS_LIT | U1, U2, U3, U4, U5, U6 |
| 4 | 107k | Resistor_SMD:R_0603_1608Metric | R8, R9, R10, R11 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 100uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L2 |
| 1 | 10uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 1 | 1SS404,H3F | Diode_SMD:D_SOD-323 | D1 |
| 1 | 2M | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 5055780261 | 5055780261:CONN_50557802xx_MOL | J1 |
| 1 | AP3015 | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | LTC3631EMS8E-5-TRPBF | MSOP-8:MSOP-8_MS_LIT | U8 |
| 1 | SS14 | Diode_SMD:D_SMA | D2 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3 |
| 1 | To EtherCAT DAQ | Connector_JST:JST_GH_SM09B-GHS-TB_1x09-1MP_P1.25mm_Horizontal | J3 |
| 1 | To FT Sensor | Connector_JST:JST_GH_SM08B-GHS-TB_1x08-1MP_P1.25mm_Horizontal | J2 |
The 57 most common of 58 parts.
Similar boards
- 2 layers59.5 × 27.2 mm

- 2 layers30.4 × 52.6 mm

MBus ESP Adapter
tomasmcguinness/matter-esp32-mbus-adapter
An ESP32-C6 adapter board for wired M-Bus (EN 13757) meters, with firmware examples that expose meter readings to a Matter fabric over Thread.
42 parts2 - 2 layers99.5 × 70 mm

Breakout 1
Cuprum77/LCD_Driver
FPGA based LCD driver for cheap ST7701S displays
91 parts2CERN-OHL-S-2.0 - 2 layers38.2 × 128 mm

DI Lambda UNO bottom
koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1
39 partsCC-BY-SA-4.0 - 2 layers34.6 × 40 mm

- 2 layers39 × 45 mm

Gbastn
zephray/GbaStnMod
The hardware design is released under the CERN Open Source Hardware License strongly-reciprocal variant, CERN-OHL-S. A copy of the license is provided in the source repository.
66 parts11 - 2 layers43.7 × 21.1 mm

- 2 layers80 × 129.1 mm

Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303
Questions
How big is the Draco FT Amp 2024 PCB?
It measures 45.3 × 33.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Draco FT Amp 2024 use?
58 parts, built around the AP3015, 1SS404,H3F and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Draco FT Amp 2024 KiCad files?
From the mark-helwig/HCRL_Draco3_PCBs repository on GitHub, at the commit this page was made from: the board is FT Sensor Amplifier Board/Draco_FT_Amp_2024.kicad_pcb and its schematic FT Sensor Amplifier Board/AmpSchem.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Draco FT Amp 2024 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).