

Traffic Light Controller guide
- Size
- 125.5 × 83 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 63
- Pads
- 180
- Tracks, vias
- 392, 20
- Pours
- 195
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Apr 2026
- Updated
- 20 Apr 2026
Overview
Traffic Light Controller guide is an open-source printed circuit board by marjqty, from the marjqty/KiCad_Traffic_Light_Controller_guide repository on GitHub, published under the MIT licence. It is a 2-layer board of 125.5 × 83 mm with 65 parts on 63 nets, routed with 392 tracks and 20 vias.
It is built around the SM420561N, LM1117DT-3.3 and 1N4148W. Its parts include 32 resistors, 13 diodes, 5 capacitors, 4 connectors and 3 ICs.
Main components
3SM420561N
插件-20℃~+80℃ 0.56 1 12.6mm 19mm 25mcd 2V 50mW 7 Segment 8mm Common Cathode Red 插件 LED Segment Displays ROHSARKLEDLED Segment DisplaysLM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
README.mdKiCad_Traffic_Light_Controller_guide
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 130R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R10, R14, R15, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 +6 |
| 6 | 47K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R27, R28, R29, R30, R31, R32 |
| 4 | 130 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R12, R13, R16 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 1N4148W | Diode_SMD:D_SOD-123 | D11, D12, D13 |
| 3 | GREEN | LED_THT:LED_D5.0mm | D1, D4, D7 |
| 3 | RED | LED_THT:LED_D5.0mm | D3, D6, D8 |
| 2 | 0.22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1, J2 |
| 2 | LED | LED_THT:LED_D5.0mm | D9, D10 |
| 2 | SM420561N | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | U1, U2 |
| 2 | YELLOW | LED_THT:LED_D5.0mm | D2, D5 |
| 1 | +5V | my_footprints:Terminal_Block_5mm | J4 |
| 1 | 0.22u | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C5 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.8 | C4 |
| 1 | 10u | Capacitor_SMD:CP_Elec_4x5.3 | C3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | EN | my_footprints:slide_switch_2.54mm | SW3 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LOGO | my_footprints:cinamonroll | G*** |
| 1 | OVR | my_footprints:slide_switch_2.54mm | SW2 |
| 1 | RST | my_footprints:tact_switch_5mm | SW1 |
Similar boards
- 2 layers126 × 92.5 mm

- 2 layers128 × 95 mm

- 2 layers126.4 × 82.5 mm

- 2 layers107.8 × 82.1 mm

- 2 layers124.2 × 91.3 mm

- 2 layers117.3 × 89.7 mm

KiCad Traffic Light Controller
emolagaroxieelaine-del/KiCad_Traffic_Light_Controller_guide
64 partsMIT - 2 layers130.5 × 93.5 mm

- 2 layers119.9 × 95.2 mm

JLPCB 2layers
juliancientos/Logic-Circuit-Design
This folder contains projects including testing basic logic gates, writing digital logic code and testbenches, compiling the verilog, analyzing timing and mapping logic pins and designing the schematic and custom pcb…
64 partsMIT
Questions
How big is the Traffic Light Controller guide PCB?
It measures 125.5 × 83 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Traffic Light Controller guide use?
65 parts, built around the SM420561N, LM1117DT-3.3 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Traffic Light Controller guide KiCad files?
From the marjqty/KiCad_Traffic_Light_Controller_guide repository on GitHub, at the commit this page was made from: the board is Traffic_Light_Controller_guide.kicad_pcb and its schematic Traffic_Light_Controller_guide.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Traffic Light Controller guide design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).