

Atmega1284p
KiCad Sources files and RIOT integration of my custom boards
- Size
- 48.3 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 46
- Pads
- 167
- Tracks, vias
- 318, 152
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 May 2020
- Updated
- 29 Jun 2023
Overview
Atmega1284p is an open-source printed circuit board by maribu, from the maribu/boards repository on GitHub. It is a 2-layer board of 48.3 × 99.1 mm with 32 parts on 46 nets, routed with 318 tracks and 152 vias.
It is built around the ATMEGA1284P-PU and CH340N. Its parts include 12 connectors, 9 capacitors, 3 ICs, 2 switches and 2 crystals. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA1284P-PU
PDIP-40-40℃~+85℃ 1.8V~5.5V 10bit 128KB 16KB 20MHz 32 4KB 8 Bit AVR Built-in FLASH PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340N
SOP-8-20℃~+70℃ 1 2Mbps 3.3V、5V USB 2.0 USB to serial SOP-8 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4 |
| 2 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C8, C9 |
| 2 | 10pF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C4, C7 |
| 2 | 10µF | boards:electrolytic_capacitor_10uf | C2, C3 |
| 2 | 20pF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C5, C6 |
| 1 | 10nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 12MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 32.768kHz | Crystal:Crystal_DS10_D1.0mm_L4.3mm_Horizontal | Y2 |
| 1 | ATmega1284P-PU | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J10 |
| 1 | AVR-JTAG-10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J9 |
| 1 | CC1101_Breakout | boards:CC1101_Breakout | J12 |
| 1 | CH340N | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | I2C1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | I2C2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | LDO-3V3 | boards:LDO-3V3 | U2 |
| 1 | PA | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | PB | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | PC | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | PD | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | SW_RST | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TOSC | Button_Switch_THT:SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW2 |
| 1 | USB_B_Mini | boards:USB_Mini-B-Through-Hole | J11 |
More from maribu/boards
6- 2 layers79.5 × 58.4 mm

- 2 layers48.3 × 48.3 mm

- 2 layers45.7 × 88.3 mm

- 2 layers73 × 61.7 mm

- 2 layers55.9 × 35.6 mm

- 2 layers68.6 × 53.3 mm

Similar boards
- 2 layers229.9 × 111.8 mm

- 2 layers71.6 × 65.8 mm

1541-rebuild
ThKattanek/1541-rebuild
Ersetzt den Analogteil einer Floppy 1541 oder 1541-II durch ein µC.
20 parts49GPL-2.0 - 2 layers80 × 64.7 mm

Keyman64
hbekel/keyman64
programmable C64 keyboard interceptor and hardware control system
33 parts18GPL-3.0 - 2 layers95.3 × 36.8 mm

- 2 layers50.8 × 99.1 mm

U arm
Wiles/u-arm
PCB for Linux on 8bit http://dmitry.gr/?r=05.Projects&proj=07.%20Linux%20on%208bit
19 parts3Apache-2.0 - 2 layers65 × 48.5 mm

- 2 layers94 × 55 mm

Avr basic sbc
bazsimarkus/avr-basic-sbc
An ATmega1284P-based single board computer with composite video output, PS/2 keyboard input, running Tiny BASIC.
38 parts - 2 layers195.6 × 113 mm

HVA
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
228 parts
Questions
How big is the Atmega1284p PCB?
It measures 48.3 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atmega1284p use?
32 parts, built around the ATMEGA1284P-PU and CH340N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atmega1284p KiCad files?
From the maribu/boards repository on GitHub, at the commit this page was made from: the board is atmega1284p/atmega1284p.kicad_pcb and its schematic atmega1284p/atmega1284p.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atmega1284p design in my own project?
Its repository states no licence, so its author keeps all rights: ask maribu before reusing the design.