Skip to the content
2 layers280 × 91 mmKeyboard, the printed circuit board in 3D

60% mechanical keyboard

Size
280 × 91 mm
Copper layers
2
Thickness
1 mm
Parts
147
Nets
100
Pads
395
Tracks, vias
687, 22
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Feb 2020
Updated
20 Feb 2021

Overview

Keyboard is an open-source printed circuit board by MarekKap, from the MarekKap/KK_ansi60 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 280 × 91 mm with 147 parts on 100 nets, routed with 687 tracks and 22 vias.

It is built around the ATMEGA32U4 and TS4148. Its parts include 63 diodes, 61 switches, 10 capacitors, 6 resistors and 2 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

KK_ansi60

60% mechanical keyboard

KK_ansi60 keyboard is inspired by GH60 open source keyboard. Case and mounting plate are made from one piece of aluminium alloy. This feature allows very solid and compact design. On the other hand only ane switch layout is supported. Keyboard support TMK firmware, so everything is open source and customizable. On default there are two base layers. Active layer is indicated with LED under FN1 or FN2 key.

title image

Build instructions

  1. Solder all SMDs parts on PCB.
  2. Temporary solder USB cable on connector J1.
  3. Load firmware.
    1. Plug USB cable into computer.
    2. Run command dmesg, you should see Product: ATm32U4DFU in output list. If not, double check your soldering and check if you have ATMEGA32u4 with DFU bootloader.
    3. Clone repo git clone "https://github.com/MarekKap/KK_ansi60".
    4. Go to firmware directory cd KK_ansi60/Firmware/.
    5. Compile program make.
    6. Load firmware into keyboard sudo make dfu.
    7. Unplug USB cable from computer.
  4. Desolder USB cable.
  5. Install keycaps stabilizers on top plate.
  6. Install some switchies on on top plate. Start with edges and long keys.
  7. Flip the top plate and put PCB on installed switches.
  8. Cut switch legs. Keep in mind, there is only 2mm space between PCB and bottom plate.
  9. Solder switches on PCB.
  10. Install, cut and solder rest of the switches.
  11. Install, cut and solder LED1 and LED2.
  12. Remove insulation from USB cable. Use heat shring tube or your nylon cable sleeve will start stripping over time.
  13. Use cable tie to hold USB cable in place.
  14. Solder free USB wires to connector J1. Keep D+ and D- wires twisted as long as possible.
  15. Hold down USB wires using kapton tape on PCB.
  16. Install CNC legs with screws on bottom plate and put self adhesive pads in place.
  17. Stick a insulation sticker on bottom plate (PCB side).
  18. Screw bootom and top piece together with M2.5 screws.
  19. Plug USB cable into computer and enjoy your keyboard. :-)

Where to buy

ItemSellerPrice [EUR]Note
Resistor 22R (R1, R2)Farnell0.09for 10 pcs
Resistor 10K (R3, R4)Farnell0.09for 10 pcs
Resistor 82R (R5, R6)Farnell0.13for 10 pcs
Capacitor 10uF (C1)Farnell0.80for 5 pcs
Capacitor 0.1uF (C2-C6, C8)Farnell0.52for 10 pcs
Capacitor 1uF (C7)Farnell1.33for 5 pcs
Capacitor 22pF (C9, C10)Farnell1.23for 10 pcs
White LED (LED1, LED2)Farnell2.54for 5 pcs
Quartz 16MHz (Y1)Farnell or Farnell0.84
ATMEGA32u4 (U1)Farnell3.71
Diode TS148 (D1-D61)Farnell5.23
Switch (S1-S61)AliExpress18.043 pin 65 pcs
PCBKK-electronic25.00work in progress
Stabilizers setAliExpress7.206.25u plate mounted
USB cableAny local store3.00
Top PlateKK-electronic120.00work in progress
Bottom PlateKK-electronic40.00work in progress
CNC LegsAliExpress3.00silver
Self adhesive padsAliExpress11.00for 500 pcs
Insulation stickerKK-electronic10.00work in progress
Keycap setAliExpress21.00

If you are intrested in KK-electronic parts, please email at kaplan.marek@gmail.com. Price is approx. and can by significantly lower on group buy.

Parts

147
QtyValueFootprintReferences
61MX1AKK_ansi60:MX1A-plateS1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +45
61TS4148KK_ansi60:D_0805_2012MetricD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +45
60.1uFKK_ansi60:C_0805_2012MetricC2, C3, C4, C5, C6, C8
210kKK_ansi60:R_0805_2012MetricR3, R4
222KK_ansi60:R_0805_2012MetricR1, R2
222pFKK_ansi60:C_0805_2012MetricC9, C10
282KK_ansi60:R_0805_2012MetricR5, R6
2WhiteKK_ansi60:LED_D3.0mm_ClearLED1, LED2
110uFKK_ansi60:C_0805_2012MetricC1
116MHzKK_ansi60:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11uFKK_ansi60:C_0805_2012MetricC7
1ATMEGA32U4KK_ansi60:LQFP-44_10x10mm_P0.8mmU1
1Conn_01x02KK_ansi60:PinHeader_1x02_P2.54mm_VerticalJ2
1USBKK_ansi60:PinHeader_1x04_P2.54mm_VerticalJ1

The 144 most common of 147 parts.

Similar boards

  • 6 layers107 × 78 mmZipper, the printed circuit board in 3D

    Zipper

    myriadrf/reference-development-kit

    The Myriad-RF Reference Hardware design files and firmware

    945 parts49
  • 12 layers130 × 145 mmStream, the printed circuit board in 3D

    Stream

    myriadrf/STREAM

    FPGA development platform for high-performance RF and digital design

    1,240 parts31
  • 4 layers69 × 75 mmMain pcb, the printed circuit board in 3D

    Main pcb

    jlassahn/gamesquirrel

    A handheld game console.

    70 parts1
  • 2 layers50 × 45 mmAudio interface, the printed circuit board in 3D

    Audio interface

    leventelist/audio_interface

    Audio interface

    31 parts
  • 2 layers60 × 60 mmCANE Junction, the printed circuit board in 3D

    CANE Junction

    Gregification/BeeMS

    Battery Management System

    98 parts5MIT
  • 2 layers147 × 78 mmKontroler, the printed circuit board in 3D

    Kontroler

    domenipavec/traffic-light

    44 parts
  • 4 layers76.2 × 101.6 mmMECHANICAL NUMPAD PCB WITH RP2040, the printed circuit board in 3D

    MECHANICAL NUMPAD PCB WITH RP2040

    jaredhumphreys3141/MECHANICAL-NUMPAD-PCB

    This is a custom numeric pad that is designed to be usable on the right side of the keyboard or on the left (With a mirrored layout if required). There is a gap in the top row and the second row of 1.25U.

    93 parts
  • 2 layers89 × 100 mmHub16, the printed circuit board in 3D

    Hub16

    joshajohnson/Hub16

    A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

    132 parts388

Questions

How big is the Keyboard PCB?

It measures 280 × 91 mm and has 2 copper layers, 1 mm thick.

What parts does the Keyboard use?

147 parts, built around the ATMEGA32U4 and TS4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard KiCad files?

From the MarekKap/KK_ansi60 repository on GitHub, at the commit this page was made from: the board is Electrical/keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).