2 layers100 × 70 mm
Utf-9-samplified
wgd-modular/utf-9-samplified
A standalone drum machine based on the bleep drum.
27 parts19
2 layers51.4 × 24.1 mm
Miniflex
marcusbarbu/TophA modular solution for sightless navigation
- Size
- 51.4 × 24.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 12
- Pads
- 29
- Tracks, vias
- 61, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jan 2019
- Updated
- 14 Jan 2019
Overview
Miniflex is an open-source printed circuit board by marcusbarbu, from the marcusbarbu/Toph repository on GitHub, published under the MIT licence. It is a 2-layer board of 51.4 × 24.1 mm with 5 parts on 12 nets, routed with 61 tracks and 0 vias.
It is built around the MCP4901-E/P and HC-SR04. Its parts include 3 ICs and 2 connectors.
Main components
2
MCP4901-E/P
PDIP-8-40℃~+125℃ 1 1LSB 2.7V~5.5V 4.5us 8 Power-on reset、Power-down mode、Programmable gain SPI PDIP-8 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)
HC-SR04
-- Ultrasonic Receivers, Transmitters ROHSUniversal MicroelectronicsUltrasonic Receivers, Transmitters
README
README.mdToph
What is it?
- Final project for ECE-UY 4144 Intro to Embedded Systems Design.
- A modular solution to wall sensing
How?
- Miniflex contains the physical modules used in the Toph system.
- Toph is written in C using minimal Arduino-specific syntax and macros.
- Toph is extendable. New modules can be added with a single line of code.
Why?
- An exercise in embedded design, from hardware to software.
Parts
5Questions
How big is the Miniflex PCB?
It measures 51.4 × 24.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Miniflex use?
5 parts, built around the MCP4901-E/P and HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Miniflex KiCad files?
From the marcusbarbu/Toph repository on GitHub, at the commit this page was made from: the board is miniflex/miniflex.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Miniflex design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers75.6 × 113 mm
Lingcordion
LingDong-/lingcordion
Pocket-sized digital musical instrument inspired by the piano and the accordion
61 parts14 - 2 layers52 × 48 mm
STM32-Based Programmable Waveform Generator
devjamescollier/STM-32_Based_Waveform_Generator
USB-powered programmable function generator built around an STM32C031K6T6 microcontroller and MCP4901 DAC. Generates clean sine, triangle, and square waveforms with amplitude control via potentiometer, mode selection…
48 partsCERN-OHL-P-2.0 - 2 layers77 × 92 mm
HananClasicaPcb
oficinadesonido/hanan-cumbia
Batería electrónica HANAN CUMBIA para Arduino Nano + web flasher (Web Serial)
32 parts - 2 layers108 × 80 mm
Bridge
Roman-Rice-Engineering/auto-golf-cart
This is the official repository for the autonomous golf cart project at MVTHS
45 partsMIT - 2 layers80 × 60 mm
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10 - 2 layers120.7 × 184.1 mm
- 2 layers110 × 80 mm
Noko 2
NikolaiRadke/Noko_2
The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.
51 parts3Apache-2.0