

Atmega328p minimal
Expansion board for Atmega328p.
- Size
- 29.2 × 52.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 26
- Pads
- 72
- Tracks, vias
- 39, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Mar 2018
- Updated
- 18 Nov 2020
Overview
Atmega328p minimal is an open-source printed circuit board by marcbperez, from the marcbperez/atmega328p-minimal repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 29.2 × 52.7 mm with 8 parts on 26 nets, routed with 39 tracks and 3 vias.
Its parts include 2 capacitors, 2 connectors, 1 resistor, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdatmega328p-minimal
Expansion board for Atmega328p.
Installation
The schematics project is done in KiCad, free and available to most common platforms. More information on how to download and install KiCad can be found in its official download page.
Usage
Clone the sources and browse the package folder. The KiCad project is located in
kicad-project/atmega328p-minimal.pro.
git clone https://github.com/marcbperez/atmega328p-minimal
cd atmega328p-minimalTesting
There is no testing in place for this project yet.
Troubleshooting
The issue tracker intends to manage and compile bugs, enhancements, proposals and tasks. Reading through its material or reporting to its contributors via the platform is strongly recommended.
Contributing
This project adheres to Semantic Versioning and to certain syntax conventions defined in .editorconfig. To get a list of changes refer to the CHANGELOG. Only branches prefixed by feature-, hotfix-, or release- will be considered:
- Fork the project.
- Create your new branch:
git checkout -b feature-my-feature develop - Commit your changes:
git commit -am 'Added my new feature.' - Push the branch:
git push origin feature-my-feature - Submit a pull request.
Credits
This project is created by marcbperez and maintained by its author and contributors.
License
This project is licensed under the Apache License Version 2.0.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22pF | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | CONN_01X16 | Pin_Headers:Pin_Header_Straight_1x16 | P2, P3 |
| 1 | 10k | Resistors_SMD:R_0603 | R1 |
| 1 | DIP-CRYSTAL-16MHZ-18PF-30PPM-40R_HC49US_ | SeeedOPL-Crystal Oscillator-2016:HC49US | Y1 |
| 1 | MCU-ATMEGA328P-PU_DIP28_ | SeeedOPL-IC-2016:DIP28-2.54-34.7X7.62MM | U1 |
| 1 | SMD-BUTTON_4P-5.2X5.2X1.5MM-SKQGADE010_ | SeeedOPL-Switch-2016:SW4-SMD-5.2X5.2X1.5MM | SW1 |
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the Atmega328p minimal PCB?
It measures 29.2 × 52.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atmega328p minimal use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atmega328p minimal KiCad files?
From the marcbperez/atmega328p-minimal repository on GitHub, at the commit this page was made from: the board is kicad-project/atmega328p-minimal.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atmega328p minimal design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).